Personligt skydd Svets

Argon welding glove of soft goatskin with top and collar (12 cm) of split leather. Unlined and sewn with Kevlar thread. Length 30-35 cm. Lanolin- and DMFu-free.

Approved/Certified according to:
EN ISO 21420:2020
EN 388:2016 2132X
EN 407:2020 41214X< BR>EN 12477:2001+A:2005: (Type B)

Light and compact fan unit that provides continuous air flow to the welding helmet. With QRS coupling for easy handling of the air hose. The design allows any combination of particle and gas filters for protection against specific organic, inorganic and acid gases. You can change the particle filter or the gas filter as needed. No external batteries, no battery cables and no sharp edges. Particle filter indicator shows how much filter capacity you have left. The batteries can be charged either on site in the fan unit or separately.
Used together with 3M Speedglas welding helmets prepared for Adflo. Adapter included to also fit the 9000 series.

1. Spark protection that reduces the risk of the filters igniting.
2. Pre-filter gives the particle filter longer life.
3. Particle filter in easily replaceable cassette. Despite its small dimensions, the filter has a very high degree of filtration.
4 a. ABE gas filter is available as an additional accessory in a common, easily replaceable cassette that protects against specific organic (A), inorganic (B) and acid (E) gases. The cassette is snapped directly onto the fan unit.
4 b. As an option, there is an odor filter that removes unpleasant odors when particle filters alone are used. Snaps directly onto the fan unit.
5. Specially designed, brushless motor with three times longer life than conventional fan motors.
6. Control panel that provides ongoing information about functions and operating mode. Indicates ON/Airflow-Plus/OFF, warns of low airflow and low battery voltage with sound and light signal and shows battery status.
7. Air hose connection sits parallel to the back, reducing the risk of the hose gets stuck in surrounding equipment.
8. The air hose fits all models of the welding helmet Speedglas 9000 Fresh Air.
9. The air channels in the helmet distribute the fresh air and provide an even , soft and pleasant airflow over the entire face.

Specially designed for narrow places where it is not possible to work with a traditional welding mask. The material is made of genuine leather and therefore breathes and also adapts to the user's head shape. Effectively protects the welder's entire main area from sparks and splashes. Equipped with a neck-protecting leather neck piece.
Welding glass size: 60x110 mm, darkness DIN 9 Gradually opening glass hatch that can be used in a peek-a-boo position
Meets the standard for protective helmets CE / EN 175

The fresh air unit EPR-X1 PAPR unit (fan assisted respiratory protection) is compatible with all ESAB's current fresh air helmets and provides advanced respiratory protection against harmful welding fume particles. This PAPR is designed for applications ranging from occasional use to full-time industrial applications. This EPR-X1 offers a robust, compact housing with powerful ventilation to ensure maximum longevity and performance. Check your battery status, fan settings and filter conditions easily with quick-access status LEDs. 
In addition, the PAPR emits audio and vibration alarms to notify the user of low airflow (indicating a necessary filter change) and low battery.
EPR- The X1's turbo unit is controlled with easy-to-access push buttons that allow three airflow rate ranges of 170/190/220 l/min. 
The EN12941 TH-3P certified two-stage HEPA-grade filter and spark arrester are easily accessible through a removable front cover.  ;
Supplied with carrying strap, battery, battery charger, filter, pre-filter and expandable hose.

Fresh air unit used together with Esab's welding helmets. Robust construction makes it suitable for all heavy duty welding applications. Provides proper protection against welding fumes and dust when welding, chiseling and grinding. Adjustable airflow from 170 l/min to 220 l/min to suit the environment and application. The airflow is indicated by the LED at the top of the unit. Audible and visual alarms for clogged filter and low battery level, giving the welder extra safety. Powerful Li-Ion battery pack that provides up to 8 h of use at air flow 220 l/min. Easy filter change.
Standard equipment: Fan unit, battery, intelligent charger, P3 filter, pre-filter, waist belt, air hose and Proban hose cover.
Dimensions (LxWxH):< /b> 185x100x160 mm.
Weight: 1000 g.
Tested and certified according to CE-EN12941 to be used together with < b>welding helmets Sentinel A50 (TH2), Warrior Tech (TH3), G50 (TH3), G40 (TH3), G30 (TH3) and F20 (TH2).

Front protection kit for 3M Speedglas welding helmet 9100FX/9100MP. For replacement of the front guard that holds the transparent, protective visor.

The spare parts below are common to all Speedglas models.

CE marked.
Conforms to EN 169.

Placed in front of the welding glass, to protect the welding glass from spray and particles which can damage the welding glass. Protective glasses that are rated CR39 are extra durable.

Complete protective helmet SR 580 with welding visor SR 584 which, together with the battery-powered fan SR 500 or SR 700 and approved filters, are part of Sundström's fan-assisted breathing protection system. Can also be used together with compressed air additive SR 507, this combination constitutes a breathing apparatus with continuous air flow for connection to compressed air. The combinations protect against harmful gases/particles, radiation and splashes during welding, cutting, grinding and similar work. The design makes them useful for work in narrow and hard-to-reach spaces. The equipment can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. Protective helmet with flip-up visor. Protects the breathing zone and the head. Adjustable head position. Replaceable flexible breathing hose that connects to the filter-equipped fan. Equipped with exhalation valve. Standard attachment for earmuffs. The positive pressure in the helmet's visor prevents particles and other contaminants from entering the breathing zone. The flip-up welding visor is delivered mounted on the helmet, with EN 10 welding glass and polycarbonate protective glass (dimensions 90x110 mm). Accessories in the form of automatic welding glasses, correction glasses, neck and chest protection and hose protection are available.
Contents: Safety helmet SR 580, breathing hose, welding visor SR 584 with degree of darkness EN 10, cleaning napkin SR 5226 and instructions for use.< BR>Usage temperature: -10°C - +55°C
Assigned protection factor: 100 (3A, 3B), 200 (TH3)
Nominal protection factor: 200 (3A, 3B), 500 (TH3)
Darkness level: EN 10
Weight: 1390 g
< BR>Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 14594:2005
EN 397
EN 175:1997
EN 166

Durable casting boot in soft, impregnated, heat-resistant leather and sewn with 100% heat-resistant Kevlar thread. Lightweight aluminum toe cap and soft metal-free nail tread protection. The combination of the insole X-40 Duo and Energy Gel 2.0 in the heel provides maximum shock absorption, exceptional rebound and a sense of failure. PU abrasion protection on the toe. Heat-resistant nitrile rubber sole with very good grip. Very spacious read. Antistatic properties.

Approved/Certified according to:
EN ISO 20349-2:2017 (S3, SRC, HRO, HI, WG)

Mid-height safety boot for welding with heat-resistant Thinsulate lining. Toe cap in aluminum and nail tread protection in plasma-treated textile (PTC). ProNose toe wear protection. Pull loops. Padded shaft. Velcro closure. Specially treated leather with heat-resistant para-aramid thread in the seams provides resistance to heat with a maximum operation of 400°C for 30 minutes. Insole FX2 Pro Slim in textile, soft E.V.A, electrically conductive polyester thread and Poron XRD with double shock absorption zones. PU midsole. Oil- and heat-resistant nitrile outsole with extremely good grip. Antistatic properties. Wide fit.

Approved/Certified according to: 
EN ISO 20345:2011 (S3, SRC, CI, HRO, HI, WG) 
EN ISO 20349-2:2017 (S3, SRC, CI, HRO, HI, WG) 
IEC 61340-5-1 - ESD

Spacious protective boot with the highest quality level of protection. Very good grip and excellent fit. Double shock absorption zones, toe cap in aluminum and nail tread protection made of plasma-treated textile. Heat resistant outsole and upper. Pronose toe wear protection, antistatic properties and oil stain outsole. Water repellent.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, HRO, CI)

Protective boot for demanding conditions with hard wear and high heat. Heat-resistant sole that can withstand temperatures up to 300°C and seams made of heat-resistant Kevlar. Oil and chemical resistant sole. aluminum toe cap and steel nail tread protection, the leather of the upper part is protected by toe cap. Shock absorption in sole and heel. Wide read. Inner lining that absorbs and transports away moisture. Water repellent. BOA lacing mechanism. Antistatic properties.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, HRO)
IEC 61340-5-1 - ESD

Protective boot suitable for welding work, protects against heat hazards and splashes of molten metal. Aluminum toe cap and steel toe cap. Water-repellent upper in grain leather. Insole consisting of three layers. The middle layer in the sole is made of shock-absorbing FlexStep material. Oil-, chemical- and heat-resistant outer sole made of polyurethane and rubber that withstands hard wear and heat up to 300°C. The sole provides excellent grip and is very durable. Antistatic properties. Extra wide read.

Approved/Certified according to:
EN ISO 20349-2:2017 (S3 SRC WG HI HRO FO)
IEC 61340-5-1 - ESD

Heat-resistant and durable safety shoe with aluminum toe cap and soft metal-free nail tread protection. Upper part of full-grain impregnated leather. Sewn with heat resistant thread. PU abrasion protection on the toe. Airy mesh lining and durable, quick-drying Cambrelle in the heel. Binding sole with steel rail in the hollow foot for support and stability. Ortholite X-40 Duo insole and Energy Gel 2.0 in the heel. Antistatic oil and heat resistant nitrile rubber outsole. Very spacious last.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, HRO, HI)

Heat-resistant and durable protective shoe in soft, impregnated leather, sewn with heat-resistant Nomex thread and equipped with a heat-resistant Nomex shoelace. Lightweight aluminum toe cap and soft metal-free nail tread protection. The combination of the insole X-40 Duo and Energy Gel 2.0 in the heel provides maximum shock absorption, exceptional rebound and a sense of failure. PU abrasion protection on the toe. Heat-resistant nitrile rubber sole with very good grip. Very spacious read. Antistatic.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, HRO, HI)

Heat-resistant, water-repellent safety shoe with composite toe cap and steel spike protector. ProNose toe wear protection, Kevlar thread in the seams and heat resistant upper. Oil and heat resistant outsole. Bellows tongue and padded shaft edge. Double shock absorption zones. Antistatic properties.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, HRO, CI, HI)
IEC 61340-5-1 - ESD

Spacious protective shoe with the highest quality of protection. Very good grip and fit. Double shock absorption zones, aluminum toe cap and ProNose toe wear protection. Heat and oil resistant outsole. Heat resistant upper and antistatic properties. Water repellent.

Approved/Certified according to:
EN ISO 20345:2011 (S2, SRC, HRO, CI)

Safety shoe with aluminum toe cap and steel nail tread protection. Velcro closure. Leather upper. Oil- and chemical-resistant sole that withstands heavy wear and withstands heat up to 300°C. Outsole of two layers, made of polyurethane and elastic thermoplastic polyurethane. Heat resistant Kevlar seams. Exterior of water-repellent material. Shock absorption in the heel. 3D dry lining that keeps the feet pleasantly dry. DUAL insole and FlexStep for extra comfort. Antistatic properties. Extra wide last.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, HRO)
IEC 61340-5-1 - ESD

Safety shoe with aluminum toe cap and steel nail tread protection. Leather upper. Outsole in PU/rubber friction material that can withstand temperatures up to 300°C and is oil and chemical resistant. Antistatic, shock absorbing sole. The 3D-dry lining and the loose Dual soles increase the comfort of use. Sizes 39-50 have at XL-leg.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, HRO)
IEC 61340-5 -1 - ESD

Welding and grinding helmet with unique construction. Outer folding welding visor with degree of darkness DIN 10. Large inner visor with degree of darkness DIN 2 for grinding. Interchangeable inner and outer visor glass. Lightweight helmet shell and comfortable headband. The visor provides effective protection against UV and IR radiation both when the visor is raised and when it is lowered. Main beam with air duct is available as an accessory to connect to fan unit.

Flame-resistant arm guards for welding that provide extra good protection against heat and splashes. Durable, antistatic and with rubber-like aramid reinforcement. Adjustable strap for fastening around the arm. Elasticated cuffs. Wash 60°C.
Materials: 79% cotton, 20% polyester, 1% antistatic fiber, weight 340 g/m². Reinforcement 98% aramid, 2% antistatic fiber, weight 545 g/m².

Approved/Certified according to:
OEKO-TEX 100
EN ISO 11612 (A1, B1, C1, E3, F1)
EN ISO 11611 (A1, class 1)
EN 1149-5

(HTML text not available)

Flame retardant welding pants that are approved for heavy welding class 2. Durable and antistatic with a wide multinorm protection. Extra high protection against molten metal and weld spatter. 2 front pockets. 2 spacious Cordura-reinforced back pockets with lids and hidden push button. Cordura-reinforced thumbstick pocket with lid and push button, pen pocket and button and knife holder. Leg pocket with lid and hidden press button and phone pocket with lid. Hammer handle. Aramid-reinforced knee pockets with outside opening and velcro closure. The knee pads in the knee pockets can be adjusted in height. Double reinforced crotch seam. Wash 75°C.
Materials: 79% cotton, 20% polyester, 1% antistatic fiber, weight 450 g/m². Reinforcements of 98% aramid, 2% antistatic fiber,  ;weight 545 g/m².

Approved/Certified according to:
OEKO-TEX 100
IEC 61482-2
EN 61482-1-2 class 1
EN 61482-1-1 (ELIM: 13 cal/cm², ATPV: 19 cal/cm²)
EN ISO 11612 (A1, A2, B1, C1, E3, F1)
EN ISO 11611 ( A1, A2, class 2)
EN 1149-5
EN 13034 Type PB (6)
EN 14404 - together with Fristad's knee protection 9200 KP
ISO 15797

PFAS-free and inherently flame retardant welding trousers with a front in Cantex Weld which provides extra high protection against welding and grinding fleas and a back in Cantex Stretch which makes the trousers flexible. With Tranemo Skinsafe, a multi-layer system designed to protect the user's skin against flame, heat and arcing accidents. Side pockets. Back pockets with pocket flaps. Leg pocket with pocket flap, phone pocket and hidden D-ring. Ruler pocket with pocket lid and reinforced bottom. Knee protection pockets with two different placement levels. Adjustable foot width with push buttons. Reinforced back hem. Contrast stitching. Wash at 60°C.
Materials: Cantex Weld 50% modacrylic, 36% cotton, 12% polyamide, 2% antistatic, weight 365 g/m². Cantex Stretch 48% modacrylic, 35% cotton, 12% polyamide, 3% elastic fiber, 2% antistatic, weight 365 g/m². Reinforcement material Barricader EP 99% para-aramid, 1% antistat, weight 545 g/m². 

Approved/Certified according to: 
EN 61482-2 APC 1 (ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm²) 
EN ISO 11612 (A1, A2, B1, C1, E3, F1) 
EN 1149-5 EN 13034 Type PB[6] 
EN ISO 11611 (A1, A2, class 2) 
EN ISO 15797

Welding glass that protects against UV and IR radiation and provides maximum thermal stability. Must be used together with ESAB protective glass. All welding glasses are individually marked with ESAB and degree of darkness in DIN.

Basket glass eye intended for gas welding. High degree of mechanical strength. Fits over corrective or protective glasses. Fold-up, easily replaceable welding lens in tightness level 3 DIN. Infradur PLUS coating on the welding lens and Supravision HC-AF on the lens in the basket glass eye. The lenses are fog-free on the inside and scratch- and chemical-resistant on the outside. The lenses are easy to clean thanks to non-stick nanotechnology.

Approved/Certified according to:
EN 166:2001
EN 169:2002
EN 170: 2002

Strong welding glove made of cowhide and cowhide with a padded back for increased resistance to radiant heat. For MIG/MAG and MMA welding. Reinforced seams sewn with heat-resistant Kevlar thread. Reinforced thumb for best wear resistance.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2003 4122< br>EN 12477:2001+A1:2005 Type A
EN 407:2004 413X3X

Welding and cut protection glove lined with Kevlar that protects against cuts. Made of high-quality goat grain and goat split and sewn with Kevlar thread.

Approved/Certified according to:
EN 388:2016-2132D
EN 420, EN 407:2004 -41214X
EN 12477:2001+A:2005 Type B

Flexible, unlined goat grain glove for all-round work. Withstands contact heat up to 100°C. Reinforced index finger and reinforced seams. Resistant to weld spatter and grinding spatter. Elastic 180°. Walnut split backhand. Palm thickness 0.7-0.8 mm.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN 388 :2016 3121X
EN 12477:2001+A1:2005 Type B
EN 407:2004 412X4X
EN 1149-2:1997

Unlined welding and heating glove made of goat grain. Flexible with a good fit. Withstands contact heat up to 100°C. Reinforced index finger and reinforced seams. Thickness 0.7-0.8 mm. Elastic 180°.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN 388:2016 2111X
EN 12477:2001+A1:2005 Type B
EN 407:2004 412X4X
EN 1149-2:1997

Flexible, unlined welding and heating glove in goat grain. Withstands contact heat up to 100°C. Reinforced index finger. Kevlar thread in the seams that can withstand 427°C short-term heat exposure and 204°C long-term heat exposure. Flameproof. Resistant to welding spatter and grinding spatter.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN 388:2016 3111X
EN 12477:2001+A1:2005 Type B
EN 407:2004 412X4X
EN 1149-2:1997

Fully lined flexible glove in cowhide of the highest quality. Sewn with Kevlar thread. All-round glove for work where heat-resistant gloves are needed, e.g. welding.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 3143X
EN 407 :2004 413X4X

A fully lined heating glove in durable cowhide with heat-resistant Kevlar wire. Good fit with elastic seam over the wrist. 10 cm long collar. Suitable for welding.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN 388:2016 3143X
EN 12477:2001+A1:2005 Type A
EN 407:2004 41314X
EN 1149-2:1997

Fully lined welding and heating glove for all-round work. Nut split of the highest quality. Aluminum. Withstands contact heat up to 250°C. Water and oil repellent palm. Burdock. Cut protection level 3. KEVLAR fiber. Thickness of palm material 1.3-1.5 mm. Length: 375-415 mm.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN 388:2016 3344X
EN 12477:2001+A1:2005 Type A
EN 407:2004 423344
EN 1149-2:1997