Personligt skydd

High quality nitrile glove with rolled collar for single use. Smooth and puncture-proof. Resists a wide range of chemicals for longer than many other disposable nitrile gloves. Easy to put on and take off and has excellent grip in wet and dry conditions. Suitable for work in the food industry, mechanical industry, laboratories, graphic industry, glass manufacturing and handling of cytostatics. Powder free. Silicone free. Antistatic properties. 100-pack.
Length: 24 cm.
Thickness: 0.12 mm.
AQL (tightness rating): 1.5.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN ISO 374-1:2016 Type B (JKPT)
EN ISO 374-5:2016 Virus
EU Regulation 1935/2004
EU Regulation 2023/2006

Battery-powered fan unit that, together with filters and an approved facepiece, is part of Sundström's fan-assisted breathing protection system. Can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. The fan is equipped with a filter and the filtered air is fed via a breathing tube to the face part. The overpressure that then forms prevents the penetration of surrounding contaminants. Powered by the included 14.4 V Li-Ion battery, which provides an operating time of up to 7 h. Charging time approx. 2 h. Equipped with two filters/filter combinations. Start, stop and selection of operating mode are managed with the same operating button. Display with symbols for different operating conditions. Alarm with vibrations and sound/light signals in case of obstructions in the air flow. Automatic control of air flow with compensation for air pressure and temperature. The enclosure protection of the electronics is approved according to IP67. The fan unit can be used together with hoods SR 520, SR 530, SR 561, SR 562, SR 601, SR 602, screen SR 570, welding visor SR 570/SR 574 half mask SR 900, full mask SR 200, welding visor SR 592, helmet with visor SR 580 and welding visor/helmet with visor SR 584/SR 580.
Contents: Fan SR 500, 1 standard battery 14.4 V Li-Ion 2.25 Ah, battery charger SR 513, belt SR 508, 2 pcs particle filter P3R SR 510, 2 pcs filter adapters SR 511, 2 pcs pre-filter SR 221, 2 pcs pre-filter holder SR 512, flow meter SR 356, cleaning napkin SR 5226, 3 pcs plugs for fan and user manual.
Air flow: 175 l/min
Using temperature: -10°C - +55°C
Assigned protection factor: 200 (TH3) together with SR 520, 530, 561, 562, 570, 574, 580, 584, 592, 601, 602, 604
Assigned protection factor: 1000 (TM3) together with SR 200, 900
Nominal protection factor: 500 (TH3) together with SR 520, 530, 561, 562, 570, 574, 580, 584, 592, 601, 602, 604
Nominal protection factor: 2000 (TM3) together with SR 200, 900
Weight: 1650 g

Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 12942:1998 + A2:2008

Battery-powered fan unit that is explosion-proof and specially intended for use in explosive atmospheres. Included together with filters and an approved face piece in Sundström's fan-assisted breathing protection system. Can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. The fan is equipped with a filter and the filtered air is fed via a breathing tube to the face part. The overpressure that then forms prevents the penetration of surrounding contaminants. Powered by the included 13.5 V NiMh battery, which provides an operating time of up to 6.5 h. Charging time approx. 2 h. Equipped with two filters/filter combinations. Start, stop and selection of operating mode are managed with the same operating button. Display with symbols for different operating conditions. Alarm with vibrations and sound/light signals in case of obstructions in the air flow. Automatic control of air flow with compensation for air pressure and temperature. The enclosure protection of the electronics is approved according to IP67. The fan unit can be used together with hoods SR 520, SR 530, SR 561, SR 562, SR 601, SR 602, SR 604, visor SR 540 EX, SR 570 and helmet with visor SR 580 or full mask SR 200.
Contents: Fan SR 500 EX, 1 battery 13.5 V NiMh 2.1 Ah, battery charger SR 513 EX, belt, 2 filter adapters SR 511, 2 particle filters P3R SR 510, 2 frp pre-filters SR 221 , 2 pre-filter holders, flow meter SR 356, cleaning wipe SR 5226, Vaseline tube, plug kit and user manual. 10°C - +40°C
Assigned protection factor: 200 (TH3) together with SR 540 EX, SR 570, SR 580
Assigned protection factor: 1000 (TM3) together with SR 200
Nominal protection factor: 500 (TH3) together with SR 540 EX, SR 570, SR 580
Nominal protection factor: 2000 ( TM3) together with SR 200
Weight: 1840 g

Approved/Certified according to:
EN 12941:1998 + A2:2008< br>EN 12942:1998 + A2:2008
EN 60079-0:2012
EN 60079-11:2012
EN 13463-1:2009
ATEX 2014/34/EU

Battery-powered fan unit that, together with filters and an approved facepiece, is part of Sundström's fan-assisted breathing protection system. Can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. The fan is equipped with a filter and the filtered air is fed via a breathing tube to the face part. The overpressure that then forms prevents the penetration of surrounding contaminants. Powered by the included 14.4 V Li-Ion battery, which provides an operating time of up to 12 h. Charging time approx. 3 h. Equipped with two filters/filter combinations. Start, stop and selection of operating mode are managed with the same operating button. Display with symbols for different operating conditions. Alarm with vibrations and sound/light signals in case of obstructions in the air flow. Automatic control of air flow with compensation for air pressure and temperature. The enclosure protection of the electronics is approved according to IP67. The fan unit can be used together with hoods SR 520, SR 530, SR 561, SR 562, SR 601, SR 602, screen SR 570, welding visor SR 570/SR 574 half mask SR 900, full mask SR 200, welding visor SR 592, helmet with visor SR 580 and welding visor/helmet with visor SR 584/SR 580.
Contents: Fan SR 500, 1 HD battery 14.4 V Li-Ion 3.5 Ah, battery charger SR 513, belt SR 508, 2 pcs particle filter P3R SR 510, 2 pcs filter adapters SR 511, 2 pcs pre-filter SR 221, 2 pcs pre-filter holder SR 512, flow meter SR 356, cleaning napkin SR 5226, 3 pcs plugs for fan and user manual.
Air flow: 175-240 l/min
Using temperature: -10°C - +55°C
Assigned protection factor: 200 (TH3 ) together with SR 520, 530, 561, 562, 570, 574, 580, 584, 592, 601, 602, 604
Assigned protection factor: 1000 (TM3) together with SR 200, 900
Nominal protection factor: 500 (TH3) together with SR 520, 530, 561, 562, 570, 574, 580, 584, 592, 601, 602, 604
Nominal protection factor: 2000 (TM3) together with SR 200, 900
Weight: 1650 g

Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 12942:1998 + A2:2008

(HTML text not available)

(HTML text not available)

(HTML text not available)

(HTML text not available)

Complete package with battery-powered fan unit SR 700 and full mask SR 200 with polycarbonate visor, which together with approved particle filters SR 510 P3 R or SR 710 P3 Rlter form a fan-assisted respiratory protection system. The fan is equipped with a filter and the filtered air is fed via a breathing tube to the face part. The overpressure that then forms prevents the penetration of surrounding impurities. Powered by the included 14.4 V Li-Ion battery, which provides an operating time of up to 6 h. Charging time approx. 2 h. Equipped with two particle filters. Start, stop and selection of operating mode are managed with the same operating button. Display with symbols for different operating conditions. Alarm with sound/light signals in the event of obstructions in the air flow. Automatic control of the air flow. The enclosure protection of the electronics is approved according to IP67. Full mask with excellent fit, high protective effect, eye protection and very good breathing comfort for the toughest areas of use. Made of silicone. Fits most face sizes. Spherical visor in scratch-resistant polycarbonate that provides a large field of vision. Equipped with three inhalation and two exhalation valves, which gives a very low breathing resistance. Materials and color pigments in the mask body are FDA and BGA approved for food, which minimizes the risk of contact allergies. Adjustable strap stand.
Contents: Full mask SR 200 PC with rubber strap stand, fan SR 700, filter adapter SR 280-3, breathing hose SR 551 rubber, standard battery, battery charger SR 513, rubber belt SR 504, 2-pack particle filter SR 510 P3 R, 2-pack filter adapter, 10-pack pre-filter SR 221, 2-pack pre-filter holder, flow meter, plug set, cleaning wipes and user manual.
Air flow: 175 l/min
Usage temperature: -10°C - +55°C
Assigned protection factor: 1000 (TM3)
Nominal protection factor: 2000 ( TM3)
Weight: 1550 g

Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 12942 :1998 + A2:2008
EN 136:1998 class 3
EN 166:2001

Half mask with excellent fit, high protective effect and very good breathing comfort for the toughest areas of use. Made of silicone. The mask is equipped with two exhalation valves that provide a very low exhalation resistance. The valve covers with screens effectively protect the exhalation membranes against dust and dye. Materials and color pigments in the mask frame are FDA and BGA approved for food, which minimizes the risk of contact allergies. The mask's easily adjustable elastic band stand is designed as a v-loop and has a large cupped head plate, which contributes to a comfortable and secure fit. The mask is used as filter protection in combination with filters from Sundström's filter range or in combination with compressed air additive SR 307, which then constitutes a breathing apparatus with continuous flow for connection to compressed air.
Contents: Half mask, pre-filter holder, cleaning napkin, ID label, pre-filter, storage bag and user manual.
Operating temperature: -10°C - +55°C
Assigned protection factor: 20
Nominal protection factor: 48 (P3), 50 (GasX P3), 48 (GasX P3)
Weight: 180 g

Approved/Certified according to:
EN 140:1998

Half mask in Premium Plus Pack. With excellent fit, high protective effect and very good breathing comfort for the toughest areas of use. Made of silicone. The mask is equipped with two exhalation valves that provide a very low exhalation resistance. The valve covers with screens effectively protect the exhalation membranes against dust and dye. Materials and color pigments in the mask frame are FDA and BGA approved for food, which minimizes the risk of contact allergies. The mask's easily adjustable elastic band stand is designed as a v-loop and has a large cupped head plate, which contributes to a comfortable and secure fit. The mask is used as filter protection in combination with filters from Sundström's filter range or in combination with compressed air additive SR 307, which then forms a breathing apparatus with continuous flow for connection to compressed air.
Contents: Half mask (size M/L ), 1 pc particle filter SR 510 P3 R, 1 pc gas filter SR 297 ABEK1, 5 pc pre-filter, pre-filter holder, cleaning tissue, ID label, user manual and storage box.
Use temperature: -10°C - +55°C
Assigned protection factor: 20
Nominal protection factor: 48 (P3), 50 (GasX P3), 48 (GasX P3)
Weight: 180 g

Approved/Certified according to:
EN 140:1998

Half mask with excellent fit, high protective effect and very good breathing comfort for most areas of use. Made of TPE/PP, thermoplastic elastomer and polypropylene. The mask is equipped with two exhalation valves that provide a very low exhalation resistance. The valve covers with screens effectively protect the exhalation membranes against dust and dye. Materials and color pigments in the mask body are FDA-approved for food, which minimizes the risk of contact allergies. The mask's single adjustable elastic band stand is designed as a v-loop and has a large cupped head plate, which contributes to a comfortable and secure fit. Used together with filters from Sundström's filter program, together with waist-worn filter SR 905 according to EN 12083, together with compressed air additive SR 307 or SR 507 which then functions as a breathing apparatus with continuous air flow according to EN 14594:2005, together with battery-powered fan unit SR 500 or SR 700 in Sundström's fan-assisted breathing protection system according to EN 12942:1998.
Contents: Half mask, pre-filter holder, cleaning tissue, ID label, pre-filter, storage bag and user manual.
Use temperature: - 10°C - +55°C
Assigned protection factor: 20
Nominal protection factor: 48 (P3), 50 (GasX P3), 48 (GasX P3 )
Weight: 138 g

Approved/Certified according to:
EN 140:1998

Half mask in Basic Pack. With excellent fit, high protective effect and very good breathing comfort for most areas of use. Made of TPE/PP, thermoplastic elastomer and polypropylene. The mask is equipped with two exhalation valves that provide a very low exhalation resistance. The valve covers with screens effectively protect the exhalation membranes against dust and dye. Materials and color pigments in the mask body are FDA-approved for food, which minimizes the risk of contact allergies. The mask's single adjustable elastic band stand is designed as a v-loop and has a large cupped head plate, which contributes to a comfortable and secure fit. Used together with filters from Sundström's filter program, together with waist-worn filter SR 905 according to EN 12083, together with compressed air additive SR 307 or SR 507 which then functions as a breathing apparatus with continuous air flow according to EN 14594:2005, together with battery-powered fan unit SR 500 or SR 700 in Sundström's fan-assisted breathing protection system according to EN 12942:1998.
Contents: Half mask (size M), 1 pc particle filter SR 510 P3 R, 5 pcs pre-filter, pre-filter holder, cleaning napkin, ID label, user manual and storage box .
Usage temperature: -10°C - +55°C
Assigned protection factor: 20
Nominal protection factor: 48 (P3), 50 (GasX P3), 48 (GasX P3)
Weight: 138 g

Approved/Certified according to:
EN 140:1998

Full mask with excellent fit, high protective effect, eye protection and very good breathing comfort for the toughest areas of use. Made of silicone. Fits most face sizes. Spherical visor made of laminated glass that provides a large field of vision. Equipped with three inhalation and two exhalation valves, which gives a very low breathing resistance. The exhalation valves' valve caps with shields effectively protect valves and diaphragms against dust and dye. The design and placement of the exhalation valves improve the possibilities of communication. Materials and color pigments in the mask body are FDA and BGA approved for food, which minimizes the risk of contact allergies. Adjustable elastic band stand is attached to the visor frame and to the exhalation valves, which together with a large head net contributes to a comfortable and safe fit.
The mask is used either as filter protection in combination with filters from Sundström's filter range or as breathing apparatus with continuous flow together with compressed air additive SR 307 .
The mask completed with hose SR 550 (PU) or SR 551 (rubber), it can also be used as a facepiece together with Sundström's fan SR 500 or SR 700.
Together with fan SR 500 EX, it is approved for use in explosive atmosphere.
Contents: Full mask, filter adapter, pre-filter, pre-filter holder, cleaning wipe, ID label and user manual.
Use temperature: -10°C - +55 °C
Assigned protection factor: 500 (P3), 500 (GasX)
Nominal protection factor: 1000 (P3), 2000 (GasX), 1000 (GasX P3)
Weight: 450 g

Approved/Certified according to:
EN 136:1998 class 2
EN 12942:1998 class TM3 (combined with fan SR 500/SR 700)
EN 14594:2005 (combined with compressed air additive SR 307)
EN 12942:1998 class TM3, ATEX 2014/34/EU (combined with fan SR 500 EX)

Full mask with excellent fit, high protective effect, eye protection and very good breathing comfort for the toughest areas of use. Made of silicone. Fits most face sizes. Spherical visor in scratch-resistant polycarbonate that provides a large field of vision. Equipped with three inhalation and two exhalation valves, which gives a very low breathing resistance. The exhalation valves' valve caps with shields effectively protect valves and diaphragms against dust and dye. The design and placement of the exhalation valves improve the possibilities of communication. Materials and color pigments in the mask body are FDA and BGA approved for food, which minimizes the risk of contact allergies. Adjustable elastic band stand is attached to the visor frame and to the exhalation valves, which together with a large head net contributes to a comfortable and safe fit.
The mask is used either as filter protection in combination with filters from Sundström's filter range or as breathing apparatus with continuous flow together with compressed air additive SR 307 .
The mask completed with hose SR 550 (PU) or SR 551 (rubber), it can also be used as a facepiece together with Sundström's fan SR 500 or SR 700.
Together with fan SR 500 EX, it is approved for use in explosive atmosphere.
Contents: Full mask, filter adapter, pre-filter, pre-filter holder, cleaning wipe, ID label and user manual.
Use temperature: -10°C - +55 °C
Assigned protection factor: 500 (P3), 500 (GasX)
Nominal protection factor: 1000 (P3), 2000 (GasX), 1000 (GasX P3)
Weight: 450 g

Approved/Certified according to:
EN 136:1998 class 3
EN 166:2001
EN 12942:1998 class TM3 (combined with fan SR 500/SR 700)
EN 14594:2005 (combined with compressed air additive SR 307)
EN 12942:1998 class TM3, ATEX 2014/34/EU ( combined with fan SR 500 EX)

Argon welding glove of soft goatskin with top and collar (12 cm) of split leather. Unlined and sewn with Kevlar thread. Length 30-35 cm. Lanolin- and DMFu-free.

Approved/Certified according to:
EN ISO 21420:2020
EN 388:2016 2132X
EN 407:2020 41214X< BR>EN 12477:2001+A:2005: (Type B)

Gas filter, combi filter and particle filter intended for use together with Sundström fan units.
See product sheet for detailed information on each filter.

Gas filters, combi filters and particle filters intended for use together with Sundström's half and full masks.
See product sheet for detailed information on each filter.

Dipped nitrile glove (foamed nitrile) with polyester and lycra upper. Thin glove with perfect fit and very good fingertip feel. Wash 40°C.

Approved/Certified according to:
CE category 2
OEKO-TEX 100
EN 420:2003+A1:2009
EN 388:2016+A1:2018 4121A

Metal cabinet with two sections: one with products for emergency use, dust-protected behind a plexiglass cover. Inside, a well-filled storage space, lockable. Perfect for workplaces with many stations or boards that need to be refilled regularly.
Dimensions: 38x58x17 cm.
Contains outer section:
2 pcs Cederroth 4- in-1 Blood Stopper 1910
3 pcs. instruction
Contains inner section:
1 box (6x40 pcs) Salvequick Textile plaster 6444
1 box (6x45 pcs) Salvequick Plastic plaster 6036
1 box (6x15 pcs) Salvequick Fingertip plaster 6454
1 box (6x21 pcs) Salvequick Textile plaster XL 6470
4 boxes (x40 pcs) Salvequick Wound washer 3227
5 pcs Cederroth 4-in-1 Blood stopper 1910
6 pcs Cederroth 4-in -1 Mini Blood Stopper 1911
3 pcs Cederroth Protection Package 2596
1 pcs Scissors
1 pcs Tweezers

A smaller tin cabinet with a Cederroth Little First Aid board mounted on the door. Refill items are stored in the lockable cabinet.
Dimensions: 26x44x17 cm
Table contents:
1 pc Cederroth 4-in-1 Blood stopper 1910
3 pcs Cederroth 4-in-1 Mini Blood Stopper 1911
1 pc Salvequick Plaster dispenser 490700
Cabinet contents:
1 box (6x40 pcs) Salvequick Textile plaster 6044
1 box ( 6x45 pcs) Salvequick Plastic plaster 6036
1 pc Cederroth Protective package 2596
1 pc Cederroth 4-in-1 Blood Stopper 1910
1 pc Cederroth 4-in-1 Mini Blood Stopper 1911
1 pc Scissors
1 tweezers

First Aid station with products for most types of injuries such as burn compresses, eye and wound wash spray, blood stoppers and plasters. The station can be easily adapted to different care needs. Now with an integrated dispenser containing Cederroth Soft Foam Bandage Beige (2 meters). Clear and easy-to-understand First Aid instructions are printed on the station and on the product packaging.
Dimensions: 29x56x12 cm.
Contents:
2 pcs Cederroth 4- in-1 Blood stopper 1910
3 pcs Cederroth 4-in-1 mini Blood stopper 1911
1 x 2 pcs Cederroth Burn Gel Burn compress 901900
1 pc Cederroth Eye and wound wash 150 ml 726000
1 pc Cederroth Soft Foam Dispenser incl. Soft Foam Beige, 2 m x 6 cm 51011019
1 pc Salvequick Plaster dispenser incl. 1 x 45 pc Salvequick Plastic plaster 6036 and 1 x 40 pc Salvequick Textile plaster 6444
1 x 20 pc Salvequick Wound washer 323700
1 pc Cederroth Protection package 2596
1 pc First Aid instruction
1 pc Refill key

Small first aid board for wall mounting with the most necessary parts for wound care and First Aid. Suitable for smaller spaces or to supplement other First Aid equipment.
Dimensions: 25x40x5 cm.
Contents:
1 pc Cederroth 4-in -1 Bloodstopper 1910
3 pcs Cederroth 4-in-1 Mini Bloodstopper 1911
1pc Salvequick Plaster dispenser with textile and plastic plasters 490700

Maintenance-free mask with exhalation valve against dust and other particles. 3-field construction. It is light, hygienic and provides effective and comfortable protection. The mask can be folded and has an extra soft inner part that feels pleasant against the skin. The material of the nose pad is sweat absorbent. The headbands have constant elasticity and can be adjusted to most head sizes. The CPC exhalation valve facilitates exhalation and it reduces the build-up of heat, moisture and carbon dioxide in the mask.
Conforms to EN 149:2001

Double-acting hand cream with avocado oil and provitamin B5. Has a soothing and calming effect on the skin and binds its natural moisture.

Pre-filter which is intended to capture coarse particles and thereby extend the life of the particle filters SR 510 P3 R and SR 710 P3 R, combination filter SR 299-2 ABEK1-Hg-P3 R and SR 599 A1BE2K1-Hg-P3 R. The pre-filter is placed in the pre-filter holder which is then snapped onto the particle filter or combination filter.

Adapter for earmuffs for Kask Plasma helmets.

Helmet designed especially for professional work and rescue. Ideal for tree climbing, forest, roofing, sawmill, logging, construction and rescue climbing and similar activities. Well ventilated with 10 air intakes that provide effective cooling and ventilation. The air intakes on the outer shell are equipped with protective aluminum mesh that prevents debris from entering the helmet. Chin strap with four attachment points, designed to reduce the risk of the helmet falling off in the event of a fall. Simple snapping enables quick assembly and opening of the locking mechanism. Easy size adjustment 51-63 with dial on the back of the helmet. Equipped with a special red colored ring on one of the straps for attaching the helmet to a harness. Withstands temperatures down to -30°C. LD Lateral stiffness. The helmet is tested for impacts from the front, back and sides according to EN 12492.

Approved/Certified according to:
EN 397:2012+A1:2012 (industrial helmet standard)
EN 397 -30°C
EN 397 LD
EN 397 MM

(HTML text not available)

For refilling, for example, Cederroth First Aid station 490920, 490960 and Lilla tavlan 191400.
A first dressing with 4 functions: Pressure dressing, cover dressing, burn dressing and support dressing. A universal dressing that has detailed instructions on how to give first aid on the packaging.

First Aid station for workplaces with a risk of burns and/or that handle food, e.g. workshop, industry, commercial kitchen. With, among other things, an integrated Soft Foam machine (glue-free plaster), blue detectable plasters and burn products in the form of compresses and sprays.
Contents:
2 Cederroth 4-in-1 blood stoppers 1910
3 pcs Cederroth 4-in-1 Mini blood stopper 1911
2 boxes (x2 pcs) Cederroth Burn Gel Burn compress 901900
1 pc Cederroth Burn Gel Burn spray 100 ml 51011005
1 box (x10 pcs) Cederroth Burn Cover Burn patch 901903
1 pc Cederroth breathing mask 1921
1 box (x20 pcs) Salvequick Wound washer 323700
1 box (6x200 cm) Cederroth Soft Foam Bandage 51011011
1 pc Salvequick Plaster dispenser with Blue Detectable plaster 51030130
1 refill key

Plaster dispenser with both textile and plastic plasters. The patches are allergy tested, easy to apply, flexible and easy to use. With transparent cover that protects against dust and moisture. When the patch is pulled from the dispenser, one adhesive surface is exposed and the patch is ready to be applied. The patches are pulled downwards from the machine. The machine is reloaded quickly and easily with a special key. When refilling, any patch refill from Salvequick can be inserted.
Contents:
1 pc refill Salvequick Textile patch (40 pcs) 6444
1 pc refill Salvequick Plastic patch (45 pcs) 6036
1 refill key

Plaster dispenser with Blue Detectable plasters which are specially intended for use in the food industry. The patches are detectable and detected by most metal detectors. The blue color means that the patches are also easy to detect visually. The patches are allergy tested, easy to apply, flexible and easy to use. With transparent cover that protects against dust and moisture. When the patch is pulled from the dispenser, one adhesive surface is exposed and the patch is ready to be applied. The patches are pulled downwards from the machine. The machine is reloaded quickly and easily with a special key. When refilling, any plaster refill from Salvequick can be inserted.
Contents:
1 pc refill Salvequick Blue Detectable Plaster (35 pcs) 51030127
1 pc refill Salvequick Blue Detectable Plaster ( 30 pcs) 51030126
1 pc Refill key

Wound care station with everything you need to take care of minor wounds, plasters, wound wash and Soft Foam, in a practical dispenser. Fits well as a complement to other First Aid equipment. The contents are kept fresh behind the dust-proof cover, which is easy to open with the included refill key. The products are locked, which prevents loss. It is easy to adapt the plaster refills based on the specific needs of the workplace.
Contents:
1 box (x40 pcs) Salvequick Wound washer 3227
1 box (6x450 cm) Cederroth Soft Foam Bandage 51011010< br>1 pc refill Salvequick Textile patch (40 pc) 6444
1 pc refill Salvequick Plastic patch (45 pc) 6036
1 pc refill Salvequick Textile patch XL (21 pc) 6470
1 pc Refill key.

Consistent, high-quality textile patches. The patches are allergy tested, easy to apply, flexible and easy to use. Refill that fits in Salvequick patch dispensers 490700 and 51030130 as well as Salvequick wound care stations 51011006 and 51011009.
Each refill contains 40 plasters (24 pcs 72x19 mm and 16 pcs 72x25 mm). 6 refills/box.

Face shield with hard head top or integrated protective helmet. Polycarbonate visor with special coating that is impact and scratch resistant while also being chemical resistant. Headband with steering wheel adjustment for high comfort, low weight. Comes with complete Adflo fan unit that provides continuous air flow to the screen. The fan unit is used in combination with particle and gas filters for protection against specific organic, inorganic and acid gases. The filters are changed as needed. Particle filter indicator shows how much filter capacity you have left. The batteries can be charged either on site in the fan unit or separately.
H847720: Face shield with hard head top.
H857720: Face shield with integrated protective helmet.

Light and compact fan unit that provides continuous air flow to the welding helmet. With QRS coupling for easy handling of the air hose. The design allows any combination of particle and gas filters for protection against specific organic, inorganic and acid gases. You can change the particle filter or the gas filter as needed. No external batteries, no battery cables and no sharp edges. Particle filter indicator shows how much filter capacity you have left. The batteries can be charged either on site in the fan unit or separately.
Used together with 3M Speedglas welding helmets prepared for Adflo. Adapter included to also fit the 9000 series.

1. Spark protection that reduces the risk of the filters igniting.
2. Pre-filter gives the particle filter longer life.
3. Particle filter in easily replaceable cassette. Despite its small dimensions, the filter has a very high degree of filtration.
4 a. ABE gas filter is available as an additional accessory in a common, easily replaceable cassette that protects against specific organic (A), inorganic (B) and acid (E) gases. The cassette is snapped directly onto the fan unit.
4 b. As an option, there is an odor filter that removes unpleasant odors when particle filters alone are used. Snaps directly onto the fan unit.
5. Specially designed, brushless motor with three times longer life than conventional fan motors.
6. Control panel that provides ongoing information about functions and operating mode. Indicates ON/Airflow-Plus/OFF, warns of low airflow and low battery voltage with sound and light signal and shows battery status.
7. Air hose connection sits parallel to the back, reducing the risk of the hose gets stuck in surrounding equipment.
8. The air hose fits all models of the welding helmet Speedglas 9000 Fresh Air.
9. The air channels in the helmet distribute the fresh air and provide an even , soft and pleasant airflow over the entire face.

Work glove made of flexible goatskin, half-lined with cotton upper. Classic model in good quality and with a good fit. Lanolin- and DMFu-free.

Approved/Certified according to:
CE category 2
EN ISO 21420:2020
EN 388:2016+A1:2018

Intended for helmet mounting. Level-dependent hearing protection that listens to the surroundings. The cover has a built-in enhanced FM/AM radio receiver. Audio input allows connection to communication radio. The short, flexible antenna provides reception even in difficult conditions. The radio's sound level is adapted not to exceed 82 dB(A). If the reception signal becomes too weak, the electronics automatically switch to mono without interruption in listening. Bar in stainless steel with stepless height adjustment. Attenuation value SNR 30 dB.
Supplied with 2 AA batteries and 1 cable FL6CE for connection of mobile phone, MP3 player etc. and helmet mount. Protective helmet not included.
Complies with EN 352-1.

Hygiene kit that fits 3M Peltor earmuffs. Contains 2 sealing rings and 2 damping foam. Old, stiff or worn sealing rings impair the cushioning ability of the earmuffs. The noise leaks in, so regularly replace the sealing rings to maintain the cover's performance and increase its lifespan.

Level-dependent hearing protection that listens to the surroundings. The cover has a built-in enhanced FM/AM radio receiver. Audio input allows connection to communication radio. The short, flexible antenna provides reception even in difficult conditions. The radio's sound level is adapted not to exceed 82 dB(A). If the reception signal becomes too weak, the electronics automatically switch to mono without interruption in listening. Bar in stainless steel with stepless height adjustment. Attenuation value SNR 30 dB.
Supplied with 2 AA batteries and 1 cable FL6CE for connection of mobile phone, MP3 player etc.
Conforms to EN 352-1.

Goatskin assembly glove. Cotton top and collar. Soft and affordable glove. Lanolin- and DMFu-free.

Approved/Certified according to:
CE category 2
EN 21420:2002
EN 388:2016+A1:2018

Safety glasses with scratch-resistant lens and UV filter (UV380). Polycarbonate temples.

Approved/Certified according to:
EN 166:2001
EN 167:2001
EN 168:2001 

Adapter med löstagbart och uppladdningsbart Li-Ion batteripaket. Tillsammans med ett Peltor WS-aktiverat headset skapar den en trådlös anslutning via Bluetooth mellan flygplanets pilot och markbesättningen medan pushback-operation utförs. Bredbandsljud som stöder hög ljudkvalitet. Låg latens för att minimera ekoljud. Hög duplexprestanda. Lättanvänd 2-knappsmanövrering. Kopplingsdragavlastning med stor och robust greppyta. Säkerhetskrok fäst på adaptern via en dubbelöglad nylonrem, vilket kan ge extra säkerhet och minska risken att adaptern ramlar av flygplanets kaross med förlorad kommunikation som följd. Kabellängd som matchar flygplan med bred kropp. Batterikapacitet på upp till 190 timmar. Tydliga gröna LED-batteristatusindikatorer för synlighet i starkt solljus. Kompatibel med både WS ProTac XPI och WS LiteCom headset. IP54-klassat hölje.

All-round sole with support and relief for heel and midfoot. Insole that provides comfortable support for the arched foot and shock absorption for the underside of the foot. Full sole designed to provide pleasant cushioning and comfort in most types of shoes. Upper surface layer in mesh and an underside made of PU and TPU with two pressure-relieving zones of PORON. For comfort and good stability, the sole is shaped after the heel. For normal arch.

Plastic breathing cloth, fitted with non-return valve. Packed in plastic bag.

Breathing mask in practical case with key ring. Aids to give mouth-to-mouth breathing in the correct way while reducing the risk of contact between helper and casualty. Breathing mask with non-return valve and clear instructions printed directly on the canvas.
Contents:
1 breathing mask with non-return valve.

Breathing hose that fits Sundström's face shields SR 540 and SR 540 EX. Made of polyurethane and polyamide. Length 0.9 m. 

Ankle socks in 5-pack. A bamboo sock with high wear resistance, good comfort and also designed for the best fit and flexibility. Wash 60°C.
Materials: 72% bamboo, 27% Polyamide, 1% Spandex.  

Approved/Certified according to:
OEKO-TEX 100

Low ankle socks in 5-pack. Thin sock with a good fit. Pique knit top for good ventilation and plain knit bottom for best comfort. A thin and comfortable everyday sock. Extra low model. Black sock with logo placed under the foot and size marking in the shaft.
Materials: 60% polyester, 39% polyamide, 1% elastane.

Short ankle sock with an excellent fit. Extra comfortable and very airy. Antibacterial fiber that counteracts odors. Wash 40°C.
Material: 70% Modal, 27% nylon, 3% elastane.

Approved/Certified according to:
OEKO-TEX 100

Thin, cool, low ankle sock with good ventilation. Made from durable Tencel Modal fibers extracted from beech wood. Reinforced with recycled polyamide in the heel and toe. Elastic arch for superior fit. Color coded sizes below. Wash 40°C. 
Materials: Elastane, recycled polyamide, Tencel Modal. 

Approved/Certified according to: < OEKO-TEX 100

Short ankle socks in an airy material that keeps feet dry and cool. Reinforced heel and toe sections. Wash 40°C.
Materials: 70% Modal, 27% nylon, 3% elastane.

Approved/Certified according to:
OEKO-TEX 100

Thin and cool ankle socks with very good ventilation. Made from durable Tencel Modal fiber. Reinforced with recycled polyamide in heel and toe. Elastic arch. Color coded sizes below. Wash 40°C. 
Materials: Elastane, recycled polyamide, Tencel Modal fibers. 

Approved/Certified according to:  ;
OEKO-TEX 100

Face shield with polycarbonate visor and hard head top. Folding visor with special coating that is impact and scratch resistant while also being chemical resistant. Headband with steering wheel adjustment for high comfort, low weight. Comfortable face seal against dust, spray fumes and chemicals. Increased control and comfort with valve so the user can direct the airflow inside the head cover. The design of the visor provides excellent side and downward vision with good optical clarity. Prepared for use with Versaflo fan assembly. Meets the highest performance requirements (TH3) for this type of product when used with specific Versaflo fan units.

Face shield with integrated protective helmet. Polycarbonate visor with special coating that is impact and scratch resistant while also being chemical resistant. Headband with steering wheel adjustment for high comfort, low weight. Can be used in conjunction with 3M Versaflo V-500E regulator, TR-300 battery powered fan unit and Jupiter battery powered fan unit. For electronic hearing protection, bracket Z3 AF/2 is used.
Protection classes:
SS-EN12941 TH3 connected to fan unit Versaflo TR-300 and Versaflo TR-600.
SS-EN12941 TH2 connected to fan unit Jupiter .
SS-EN14594 3B connected to regulators Versaflo V-500E, V-100E and V-200E.

Face shield with built-in battery-powered fan unit. For protection against particles. Comes complete with polycarbonate visor, fabric face seal, main filter and pre-filter, 2 replaceable visor covers, 6 hour head battery, battery charger, cotton head cover, airflow test disc and fabric storage bag.

Face shield designed and developed based on market requirements and needs. Adapted for use together with fan unit SR 500, SR 500 EX or SR 700. It can also be used together with compressed air attachment SR 507. Robust screen with fold-up visor that gives the user comfortable and safe breathing and eye protection. Protects the breathing zone and the head. Impact- and scratch-resistant PC sight glass. Adjustable head position. Air deflector for optimal comfort. Supplied air keeps the visor fog-free. Replaceable flexible breathing tube. Standard attachment for earmuffs. Exchangeable protective foils are available as accessories. PC visor and visor frame withstand high speed particles 120 m/s at extreme temperatures, liquid splash and molten metal splash. Equipped with exhalation valve. Made of materials that allow use in harsh environments.
Contents: Face shield, breathing tube, protective film with clips, cleaning cloth and user manual.
Use temperature: -10°C - +55°C
Assigned protection factor: 100 (3A, 3B), 200 (TH3)
Nominal protection factor: 200 (3A, 3B), 500 (TH3)
Weight: 860 g

Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 14594:2005
EN 166

Knitted winter glove with high thermal insulation, made of Thermolite hollow fiber. Breathes and absorbs moisture from the skin, so hands stay warm and dry. Suitable as inner gloves for protection against the cold, or for light work that is classified as minimal risk in warehouses and stores in cold environments. Length: 23 cm.

Approved/Certified according to:
CE category 1
EN ISO 21420:2020

Gloves that protect against live parts. Protects up to 1000 V according to DIN EN 60903 / IEC 60903.

Fingerless work glove in lightweight synthetic material that breathes. Moisture-wicking lining. Reinforced palm and seam at the thumb. Velcro at the wrist for individual adjustment.

Approved/Certified according to:
CE category 2
EN ISO 21420:2020
EN 388:2016 2121X

Work glove with leather on the palm for increased durability and enhanced protection of the hands. Synthetic leather on the back of the hand for increased mobility. Reinforced palm for extra comfort and protection when handling heavy objects. Smartwipe with touch function makes it possible to use touchscreen devices without removing gloves.

Approved/Certified according to:
CE category 2
EN ISO 21420:2020
EN 388:2016 2122X

Warm lined synthetic leather glove with good fingertip feel. Polyester upper and fleece lining. The glove is both chrome and silicone free, a suitable choice for allergy sufferers. Reinforced index fingers protect and provide extra wear resistance. Elastic 180°.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2121X
EN 511:2006 01X

Fully lined work glove in durable synthetic leather. Good fingertip feel and good grip. For all-round work. Fleece lining. Elastic 360°. Chromium-free.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 1131X
EN 511 :2006 11X

Work glove in synthetic leather for tough working conditions. Reinforced material and padding in the palm and on the knuckles for extra durability and protection.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 0122X

Warm lined synthetic leather glove for precision work. Smooth and comfortable. Good grip, fit and fingertip feel. Waterproof and windproof. Strengthen fingertips and index finger. Chromium free. Polyester upper and fleece lining.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 1121X
EN 511:2006 111

Waterproof and warm lined glove in synthetic leather for precision work. Reinforced index fingers and fingertips make the gloves extra durable.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388: 2016 1121X
EN 511:2006 111

Warm lined synthetic glove for all-round work. 3/4 dipped in nitrile. Sanded grip surface for best grip. Water and oil repellent palm and knuckle. Knitted cuff. Outer material of nitrile and polyester, inner material of acrylic. Warning color for good visibility.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 3231X
EN 511:2006 02X
EN 407:2004 X2XXXX

Cold-insulating work glove for all-round work. Palm dipped in nitrile foam/water-based PU. With fleece lining and knitted cuff. Withstands contact heat up to 100°C. Suitable for food handling.

Approved/Certified according to:
CE category 2
OEKO-TEX 100
EN 420:2003+A1:2009
EN 388:2016 4221X
EN 511:2006 X2X
EN 407:2004 X1XXXX
EU Regulation 1935/2004
EU Regulation 10/2011

Cold insulating work glove in acrylic, nylon, spandex, 10 gg, 15 gg. Palm dipped in nitrile foam and water-based PU. Foamed grip surface. Fleece lining and knitted cuff. Anatomically designed. Suitable for all-round work. Withstands contact heat up to 100°C. DMF (DMFa)-free. Approved for food handling.

Approved/Certified according to:
CE category 2
OEKO-TEX 100
EN 420:2003+A1:2009
EN 388:2016 4221X
EN 511:2006 X2X
EN 407:2004 X1XXXX
EU Regulation 1935/2004
EU Regulation 10/2011

Soft and flexible, winter-lined work glove with waterproof latex dipping, suitable for use in cold, wet environments. Sanded grip surface. Knitted cuff. Lining material in acrylic and polyester, 10 gg, 15 gg. Approved for food handling. Withstands contact heat up to 250°C. Supplied with hang tag with euro hole.

Approved/Certified according to:
CE category 2
EN 407:2020 X2XXXX
EN 388:2016+A1:2018 2232A
EN ISO 21420:2020
EN 511:2006 021

Tegera PRO glove in Microthan of guaranteed high quality. Fully lined with acrylic. Cotton upper. High air permeability - the material breathes. Extra good grip. Reflex. For assembly work and other tasks that place extremely high demands on flexibility and fingertip feeling.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2232X
EN 511:2006 120

A very durable winter-lined glove with extremely good grip in Microthan. Waterproof insert, chrome-free, reinforced index finger, reinforced seams, reflex.

Approved/Certified according to:
CE category 2< br>EN 420:2003+A1:2009
EN 388:2016 2121X
EN 511:2006 221

With a water- and wind-repellent membrane. Fully lined with acrylic. Polyester upper. The gloves are made of an even stronger microthan than before. Reflex. The gloves can be machine washed at 40°C.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388 :2016 2121X
EN 511:2006 01X

Lined work glove in Microthan. Reinforced with extra knuckle protection and reinforced index finger and lined with waterproof and windproof Sympatex membrane. Pre-bent fingers, chrome and silicone free. Washable at 40ºC.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2121X
EN 511:2006 111

Fully lined work glove in Microthan+ with upper hand in wind- and water-repellent polyester. Chrome-free, reinforced index finger, reinforced seams, padded palm, pre-bent fingers and specially designed thumb.

Approved/Certified according to:
CE Category 2
EN 420:2003+A1 :2009
EN 388:2016 2141X
EN 511:2006 21X

Warm and durable glove with good grip made of Microthan+. The material is suitable for touchscreens - the user does not have to take off the glove. The glove has a Thinsulate lining, which makes it extra warm, as well as a wind and waterproof Aquathan membrane. Chromium free. Reinforced index finger, reinforced seams and with reflex. Pre-bent fingers and specially designed thumb.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 1121X< br>EN 511:2006 111

New - coming in September 
Ergonomically designed winter glove where the fingers are sewn in a curved shape, the thumb has a special patented s-shaped construction and the material between the fingers is slightly thinner for maximum mobility. Made of durable Microthan + synthetic leather with a diamond-patterned palm for extra grip. Lined with recycled fleece and with flexible cuff made of recycled neoprene. Ventilating, waterproof and windproof. Touchscreen function.

Approved/Certified according to: 
CE category 2 
EN 388:2016+A1:2018 2321X 
EN 511:2006 221 
EN ISO 21420:2020

Reinforced palm with PU. The upper hand is made of neoprene. The gloves have an extra cuff to close around the wrist and a pull handle to make it easier to put on. Chrome-free. Winter lined with acrylic.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2141X
EN 511:2006 12X

Elbow protection is developed to provide easier compression support for the elbow. The protection also increases blood circulation in the area and ensures that it stays warm. Relieves pain, relieves pressure and improves muscle coordination. Protects against inflammation, strains, sprains and other types of damage. Fits both left and right elbow joints.
Prevents and rehabilitates:
Tennis and golf elbow.
Overuse/strain of soft tissue around the elbow area.
Wear-related injuries.
Inflammation and overload.
Slight elbow instability.
The size is measured by keeping the elbow slightly bent (30°) and then measuring the circumference around the elbow joint.
Can be machine washed at 40°C. Laundry bag recommended.
Materials: 3 mm foam of 70% SBR, 30% Neoprene. Cover of 100% Polyamide.

1 liter dispenser for foam hand disinfection.

Hygienic dispenser that is easy to use. Intended for Deb Skin Care cartridge with Protect skin protection cream. Equipped with pictograms that simplify for the user, easy to understand what the contents of the dispenser are and the area of ??use for the product. Made of durable plastic components. Tested for environments with frequent use. Large push button that can be operated by hand or elbow. Biocote-treated dispenser button, a treatment that effectively reduces bacteria, mold and fungi on the surface of the button. Sealed cartridge system and pump do not allow air to enter the cartridge. Gives a precise dosage every time.

Hygienic dispenser that is easy to use. Intended for Deb Skin Care cartridge with Restore moisturizing cream. Equipped with pictograms that simplify for the user, easy to understand what the contents of the dispenser are and the area of ??use for the product. Made of durable plastic components. Tested for environments with frequent use. Large push button that can be operated by hand or elbow. Biocote-treated dispenser button, a treatment that effectively reduces bacteria, mold and fungi on the surface of the button. Sealed cartridge system and pump do not allow air to enter the cartridge. Gives a precise dosage every time.

1 liter dispenser for hand disinfection.

Hygienic dispenser that is easy to use. Intended for Deb Skin Care hand disinfection, both foam and gel cartridges. Equipped with pictograms that simplify for the user, easy to understand what the contents of the dispenser are and the area of ??use for the product. Made of durable plastic components. Tested for environments with frequent use. Large push button that can be operated by hand or elbow. Biocote-treated dispenser button, a treatment that effectively reduces bacteria, mold and fungi on the surface of the button. Sealed cartridge system and pump do not allow air to enter the cartridge. Gives a precise dosage every time.

Hygienic dispenser that is easy to use. Intended for Deb Skin Care cartridge with Sun Protect sunscreen cream. Equipped with pictograms that simplify for the user, easy to understand what the contents of the dispenser are and the area of ??use for the product. Made of durable plastic components. Tested for environments with frequent use. Large push button that can be operated by hand or elbow. Biocote-treated dispenser button, a treatment that effectively reduces bacteria, mold and fungi on the surface of the button. Sealed cartridge system and pump do not allow air to enter the cartridge. Gives a precise dosage every time.

Designed to alleviate the effects of orthostatic intolerance which causes proneness to fainting in the hanging position in a user who has fallen in their harness. The ReliefStep safety device provides support and improves blood circulation. It can be mounted on all safety harnesses and is easily used as a short-term solution for the user's safety and comfort.
Don't forget the annual inspection. Get in touch with your BIG company.

Barrier tape.

Polyethylene barrier tape, manufactured by extrusion. Good tensile strength and elongation properties. Rolled on sleeve. Eco-friendly, print on both sides with water-based ink (no heavy metals). Weather resistant paint.

Extra strong barrier tape in PP (polypropylene). Environmentally friendly, leaves no environmentally hazardous residues when burned. Areas of use: Blocking during road work, construction sites, sports events, etc.

Plastic tape for cordoning off in case of laceration.

Plastic tape of Polyethylene film. For cordoning off, fencing and marking outdoor areas.

Cut-off board made of wood with reflex. Dimensions 22x95x3000 mm.
Leg stand made of hot-dip galvanized steel available as accessories.

Fluorescent, red cordon line with red and yellow reflexes. The rope is 4 mm in diameter.

Barrier post that can be used both indoors and outdoors, for temporary barriers and demarcations. Equipped with two loops to attach a chain to. Post and foot made of PVC. Intended for plastic chain 6, 8, 10 mm. 
Dimensions of the foot: 280x280 mm.

GUNNEBO INDUSTRIER 
Barrier post for temporary barricades and boundaries. Post and foot made of PVC. Intended for plastic chain 8 mm. 
Dimensions of the foot: 280x280 mm.

Set of 2 barrier posts. Made of plastic. With 4 loops for suspension at the top. Intended for 8 mm plastic chain (not included).
Foot dimensions: 265x265 mm 

Classic bathing sandal. The bottom is made of soft cushioning EVA material and the upper part is made of Polyurethane.

Quick-drying balaclava in stretch material with smooth outside and brushed inside. Can be folded down and used as a neck warmer. Wash 40°C.
Materials: 95% polyester, 5% elastane.

Balaclava in a mixture of Lifa, with moisture-wicking properties, and merino wool. Flatlock seams for best comfort. Wash 40°C.
Materials: 57% merino wool, 43% polypropylene, weight 215 g/m².

Flame retardant soft bandana with inherent flame protection for neck, head and face. Used together with flame retardant garments. Also protection against cold and wind and as extra protection when, for example, welding. Wash 60°C.
Materials: 58% modacrylic, 37% cotton, 3% elastane and 2% beltron, weight 240 g/m².

Approved/ Certified according to:
OEKO-TEX 100
EN ISO 14116 index 3
EN ISO 11612 (A1, B1, C1) - refers to the material
EN 61482-1-2 class 1 - refers to the material
EN 1149-5

Banner sign with angle bracket. Mounted on a wall, downpipe or post.

Standard battery 10.8 V, 2.9 Ah, Li-Ion. Fits Adflo fan-assisted respirators. Provides 7-9 hours of operating time. The battery must be charged with Adflo original charger 833111.

Battery charger for 10.8 V Li-Ion batteries that fit Adflo fan-assisted respirators.

Battery charger for fan units SR 500 / SR 700.

Rechargeable battery pack 2.4 V NiMH, 1900 mAh. Fits 3M Peltor earmuffs WS Headset XP, WS ProTac XP, WS5 Adapter and WS LiteCom Headset.

Visitor's set consisting of a polyethylene coat, a polypropylene non-woven hat and a pair of polyethylene shoe covers. Each set is fully packed in a package. Suitable for visitors in the food industry, for cleaning work, painting work, cleaning and protection against dust or dirt. Handles wetness more easily. Food approved.

Approved/Certified according to:
EU Regulation 1935/2004
EU Regulation 2023/2006

Inherently flame retardant bra without underwire. Adjustable wide shoulder straps. Buttoning at the back. Elastic at the bottom. Wash 60°C.
Materials: 57% modacrylic, 37% cotton, 4% elastic fiber, 2% antistatic, weight 210 g/m².

Approved /Certified according to:
OEKO-TEX 100
EN ISO 14116 index 3
EN 1149-5

For refilling, for example, Cederroth First Aid station 490920, 490960 and Lilla tavlan 191400.
A first dressing with 4 functions: Pressure dressing, cover dressing, burn dressing and support dressing. A universal dressing that has detailed instructions on how to give first aid on the packaging.

Bamboo ear stick with rounded cotton tips. Length 7.5 cm.

Boxer shorts with inherent flame protection. Elastic waist. Wear under flame retardant clothing for added safety. Wash 60°C.
Materials: 58% modacrylic, 37% cotton, 3% elastane and 2% beltron, weight 240 g/m².

Approved/ Certified according to:
OEKO-TEX 100
EN ISO 14116 index 3
EN ISO 11612 (A1, B1, C1, F1) - refers to the material
EN 61482-1-2 class 1 - refers to the material
EN 1149-5

Boxer briefs in high quality cotton. 40 mm wide elastic at the waist. Flatlock seams. Wash 60°C.
Materials: 95% cotton, 5% elastane, weight 170 g/m².

Approved/Certified according to:< BR>OEKO-TEX 100

Boxer briefs with elastic waist. 3-pack. Wash 60°C.
Materials: 95% cotton, 5% elastane, weight 170 g/m².

Approved/Certified according to:< BR>OEKO-TEX 100

Soft and comfortable boxer briefs with inherent flame protection. Elastic waist. Wear under flame retardant clothing for added safety. Wash 60°C.
Materials: 58% modacrylic, 37% cotton, 3% elastane and 2% beltron, weight 240 g/m².

Approved/ Certified according to:
OEKO-TEX 100
EN ISO 14116 index 3
EN ISO 11612 (A1, B1, C1, F1) - refers to the material
EN 61482-1-2 class 1 - refers to the material
EN 1149-5

Fire blanket to be used as a supplement to fire extinguishers when extinguishing small fires, e.g. on the stove, in furniture or clothing. Effectively smothers fire and provides minimal cleanup work. Consists of fiberglass fabric with silicone coating.
Certified according to EN 1869:1997.

Carbon dioxide fire extinguisher in fire class B. Gives a clean extinguishing with minimal secondary damage, and is therefore particularly suitable for extinguishing fires in electrical spaces, computer rooms, etc. Can also be used for extinguishing fires in flammable liquids. The cylinder is made of steel and the valve of brass. Certification: SS-EN3, CE, Wheelmark, Licensed by DNV. Wall mount included. Withstands temperatures from -30°C to +60°C.
Carbon dioxide extinguishers extinguish fires in:
Flammable liquids (B)
As well as electrical installations up to 1000 V.

Powder extinguisher with ABC powder. All-round extinguisher that extinguishes most types of fires. Extremely effective even when using small amounts of powder. Simple to use. Long range. Highest efficiency class within all fire classes.
The Fire Protection Association recommends that every home has a powder fire extinguisher of 6 kg and lowest efficiency class 43A. The higher the extinguishing power a fire extinguisher has, the bigger the fire it can put out. A 6 kg fire extinguisher with an extinguishing power of 55A extinguishes up to 60% larger fires compared to an extinguisher with an extinguishing power of 34A.
Withstands temperatures from -30°C to +60°C.
Powder extinguishers extinguish fires in :
Organic materials (A)
Flammable liquids (B)
Gas fires (C)
And electrical installations up to 1000 V.

Complete fire extinguisher cart including 2 x 6 kg powder fire extinguishers, fire blanket and rough leather glove. Robust construction with strong wheels. A mobile fire protection for temporary workplaces, festivals, concerts or fairs. Flexible pole with space for a fire blanket and safety sign that meets the requirements of the DIN 67510 standard.
Powder extinguishers extinguish fires in:
Organic materials (A)
Combustible liquids (B)
Gas fires (C)
As well as electrical installations up to 1000 V.

Combined smoke and heat detector in 2-pack for wireless serial connection. Equipped with wireless transmitter / receiver. When a smoke detector detects smoke, it sends out a radio signal that causes all interconnecting smoke detectors to sound the alarm. Built-in location function allows you to hear which fire alarm has sounded the alarm. With the pause function, you can easily silence the alarm should an unwanted alarm occur. Can be connected in series with up to 30 alarms. Test and pause function with LED that flashes during normal operation. Reacts quickly in case of glow fires. Gives an alarm signal of at least 85 dB/3 meters. Battery protection, the fire alarm cannot be mounted without a battery. Range >20 m. Transmission frequency 433 MHz. Supplied with 2 AA batteries.
Temperature sensor: 54-70ºC (depending on how fast the temperature rise is registered).

Optical fire alarm designed with inspiration from nature by Lars Wettre. With test function. Safe to operate from -10°C to +40°C. 9 V battery included (up to 1 year lifetime). Tested and approved according to CE, EN 14604.

Armor apron in stainless steel and with a ring size of 7.0 mm. Bolero model that distributes the weight on the shoulders.
Size XL: For people with a height of up to 1.99 m and a chest measurement of up to 115 cm.
Size XXL: For people with a height of up to 2.20 m and a chest measurement of up to 130 cm.

Approved/Certified according to:
EN ISO 13998 level 2

Cooling gel for minor burns, sunburn and insect stings.

Gel-soaked burn compress that slows down the effects of a burn by quickly cooling the injury site and transporting the heat away. The risk of blistering is significantly reduced. The compress is loosely fixed with gauze. Does not contain Triclosan.

Large, sterile burn compress that provides rapid cooling and effective pain relief for first and second degree burns. The cold reduces the pain and swelling and prevents the damage from going deeper into the skin. Suitable for burns on larger surfaces such as legs, arms or chest. Can also be used as a face mask. Tear off the parts of the compress in the punched holes above the eyes, nose and mouth if necessary. Easy to use with clear instructions. Water-based gel consisting of 90% water. Shelf life 5 years. 1 pack.

Sterile burn compress that provides rapid cooling and effective pain relief for first and second degree burns. The cold reduces the pain and swelling and prevents the damage from going deeper into the skin. Suitable for burns up to 20 x 20 cm. For larger areas use several compresses. Easy to use with clear instructions. Water-based gel consisting of 90% water. Shelf life 5 years. 1 pack.

Burn compress that provides rapid cooling and effective pain relief for burns. The cold reduces the pain and swelling and prevents the damage from going deeper into the skin. Cools as effectively as lukewarm water and thus speeds up the healing process. Burns must be treated quickly, therefore it is advisable to have Burn Gel both at home, at work and on the trip for the best preparedness, especially in places where there is no clean running water. Used for superficial and partially deep burns, scalds, sunburns. Can be placed on the outside of burnt clothing. 2 compresses/box.
Refill that fits in Cederroth First Aid stations 490920, 51011003.
- Quick cooling and quick pain relief.
- Cools up to 2 hours. - Water soluble.
- Non-toxic.
- Water-based (>90% water) gel with natural antiseptic Tee Tree Oil (Melaleuca Oil), which is a well-documented antibacterial and helps protect against oncoming infection.
- Shelf life 5 years.

Burn patch that protects in case of minor burns. The wound pad consists of a cool hydrogel that covers the skin's nerve fibers and helps provide relief. At the same time, a moist environment is created, which prevents the formation of scabs and provides faster wound healing. The wound pad does not stick to wounds. Is also suitable for minor cuts and abrasions. Blue in color for better visibility, which makes them suitable for use when handling food. Before applying the burn patch, cool the burn for at least 20 minutes with Cederroth Burn Gel or rinse with lukewarm water. Do not use on large and severe burns or wounds that are infected or bleeding. Change the plaster and clean the wound daily. If the patch dries out, moisten it before removing. Seek medical advice if complications occur. Shelf life 3 years. The box fits in Cederroth's First Aid stations.
Each box contains 10 sterile plasters (74x45 mm).

Burn gel in an aerosol bottle, suitable for minor burns, scalds, sunburn and radiation damage. Acts as a temporary protective barrier that cools and soothes the skin and reduces pain. Opened bottle can use several times.

(HTML text not available)

Leather belt black.

Belt in stretch material with plastic buckle.

Belt with soft buckle that does not scratch. Woven strap with velcro closure. Perfect for e.g. the automotive industry and paint facilities.
Materials: 100% polyester.

Woven belt with metal buckle.
Material: 100% polyamide.

Elastic belt of strong stretch strap. Buckle in antique silver with built-in bottle opener.
Materials: 70% polypropylene, 30% latex spun yarn.

Stretch belt with silicone-coated buckle that does not scratch. Nickel-free.
Materials: 100% polyester.

Canvas belt with nickel-free metal buckle that can be profiled with engraving.
Materials: 100% polyester.

Belt with inherent flame protection. Woven polyamide strap and buckle.
Materials: 23% modacrylic, 19% cotton, 58% polyester. Buckle made of polyamide 6.6.

Approved/Certified according to:
OEKO-TEX 100
EN ISO 14116 index 3
ISO 15797

Tool belt 40 mm for detachable pockets. Woven polypropylene tape. With buckle.

Belt in elastic fabric with logo. One size fits all. Fully adjustable.
Materials: 96% cotton, 4% spandex

Polyester belt with stretch function for increased comfort. Buckle in plastic, which reduces the risk of scratches.
Material: 100% polyester.

Belt with black metal buckle.
Material: 100% polyester.

Elastic belt with buckle in antique silver.
Materials: 95% Polyester, 5% Elastane.

Soft, knitted cardigan in women's model. Buttons at the front and ribbed edges at the cuffs and hem. Wash 40°C.
Materials: 80% cotton, 20% nylon, weight 200 g/m².

Approved/Certified according to:< OEKO-TEX 100

Cardigan med hel dragkedja framtill. Tillverkad i stretchigt, dubbelstickat lättviktsmaterial. Två sidfickor med dragkedja. Rundad nedtill med längre bakstycke. Ribbade detaljer. Tvätt 30°C. 
Material: 66% återvunnen polyester, 4% polyester, 26% rayon, 4% elastan. Mörk marinblå färg 70% återvunnen polyester, 26% rayon, 4% elastan.

Cardigan med hel dragkedja framtill. Tillverkad i stretchigt, dubbelstickat lättviktsmaterial. Två sidfickor med dragkedja. Ribbade detaljer. Tvätt 30°C. 
Material: 66% återvunnen polyester, 4% polyester, 26% rayon, 4% elastan. Mörk marinblå färg 70% återvunnen polyester, 26% rayon, 4% elastan.

Women's jacket in stretch with soft shoulders and tailored waist. Single-breasted with two buttons. Sleeves with decorative buttons at the bottom. Half-lined with fabric with antibacterial surface. Without cracks. Two front pockets and one breast pocket with inner lining that can be turned up like a handkerchief. 3 inner pockets.
Materials: 70% wool, 30% polyester, weight 400 g/m².

Hearing plug dispenser made of ABS plastic. Robust construction and can be both mounted on the wall and free standing. For both indoor and outdoor use. The machine dispenses just as many corks as you need, thus avoiding unnecessary wastage. Using an earplug vending machine is environmentally friendly in that it reduces the consumption of packaging compared to individually paired plugs. The machine should be placed in an easily accessible place, ensuring that everyone who needs to use stoppers in the workplace can easily access them.

Dispenser som inneholder to størrelser av Cederroth Soft Foam Bandage Blå, 3 cm og 6 cm brede. Med integrert skjærekniv for enkel bruk med tydelige instruksjoner. Kompakt størrelse som gjør den enkel å montere på veggen, selv på små flater. Dispenseren er låst for å forhindre svinn, og åpnes enkelt med refillnøkkel. En gjennomsiktig luke beskytter produktene mot støv og smuss. Vinduer på sidene gjør det enkelt å se når påfylling trengs.
Mål: 445x165x300 mm
Innhold: 
1 stk Cederroth Soft Foam Bandage Blå 3 cm x 4,5 m 51011022 
1 stk Cederroth Soft Foam Bandage Blå 6 cm x 4,5 m 51011010

Dispenser with 1 pack of blue Soft Foam Bandage 6 x 450 cm. Integrated cutting blade for easy use. Clear instructions. Easy to put on the wall next to the First Aid equipment. Can also be used standing on the table if the wall bracket is removed, equipped with non-slip feet. Refill packs are available in 3 different colors as needed; blue, beige or black.

Dispenser in strong plexiglass for Granberg's disposable gloves 114.624, 114.626 and 114.633. Screws for hanging on the wall are included. 2-pack.
Dimensions (WxHxD): 250x130x100 mm.

Dispensers in strong plexiglass for Granberg's disposable gloves 111.220, 111.225, 111.325, 111.420, 112.110, 114.440, 114.611, 114.615, 114.624, 114.630, 114.633, 114.770, 114.880, 114.922, 114.940 and 114.980. Screws for hanging on the wall are included. 2-pack.
Dimensions (WxHxD): 253x136x92 mm.

Touch-free dispenser with space for 1000 ml gel/liquid hand disinfectant. Powered by four C batteries which are enough for approximately 30,000 uses. Lamp shows battery level. With simple locking function. The dispenser can be mounted on the wall or on the supplied stand. The transparent window on the front makes it easy to check how much hand sanitizer is left in the container. The height of the stand can be adjusted between 1250 - 1550 mm. The touch-free dispenser system automatically doses the disinfectant when the hands are placed under the container.
Dispenser dimensions (HxWxD): 260x125x112 mm
Stand dimensions (HxWxD): 1250-1550x340x300 mm
Volume: 1000 ml
Colour: White

Robust, wall-mounted dispenser for Uvex X-fit earplugs. With transparent container with space for 600 earplugs and collection tray. Earplugs are not included.

Scented bags for fresher professional shoes and work equipment. Absorbs moisture, counteracts odors and leaves a long-lasting fresh scent. For professional shoes and other work equipment, but are adaptable and fit everywhere, creating unlimited areas of use. The inner bag is made of non-woven fabric that breathes and allows moisture to be transported from the surrounding environment. The outer material is made of recycled microfiber polyester and environmentally friendly paint has been used in the dyeing. Contains activated carbon made from bamboo and a patented mixture of minerals and absorbents, filled with a fresh scent. Natural and sustainable content. 100% free from toxins and is REACH certified for consumer safety and the environment. Duration up to 6 months, no expiry date on unopened packaging. Mixed colors. Available in two sizes. 2-pack.

Pump for 4.5 l cans.

For attaching signs etc., attaches to all smooth and even surfaces. Available in cushions and on a roll.

Shower soap for hair and body with a refreshing forest scent, suitable for both women and men.

Lightly perfumed creamy shower soap for hair and body that can be used daily in all workplaces. Suitable for both women and men.

Combination of a refreshing shower soap and a mild shampoo that is good for both body and hair. Fresh scent that lasts a long time. Contains proVitamin B5 with moisturizing substances. Provides optimal pH balance for the skin.

Mild shower soap for the whole body. Cleanses without drying out the skin. Can also be used as shampoo for hair.

Shampoo & Showers are fragrant and richly foaming. Gentle on both hair and skin. Perfumed. pH 6.5.

Shower soap for gentle and effective cleaning of the hair and the rest of the body. With conditioning properties that leave hair soft and supple. The bags are easily changed and the dispenser is easy to clean, which simplifies maintenance for the business. Without silicones, which provides easier-to-clean shower surfaces. Free from preservatives. Dermatologically tested. Mildly perfumed. 
pH value: 5.5. 

Approved/Certified according to: 
The Swan

Skin-friendly gloves made from skin-friendly bamboo fibers. Soft and smooth gloves that prevent the user from scratching directly on eczema and wounds, and at the same time contribute to the cream or ointment remaining on the treated area. Excellent fit and are very comfortable to wear. High breathability. Suitable as inner gloves or for light work that is classified as low risk in assembly, warehouses, stores, and when handling materials that are sensitive to dirt and grease. Can be washed at 60°C and retains its good properties wash after wash. Allergy tested.

Approved/Certified according to:
CE category 1
EN ISO 21420:2020

Elastic support bandage. Clips included.

Cordura® reinforced belt with ergonomic design and innovative and flexible attachment system for pockets. Adjustable and removable braces that are padded, reduce the weight on the hips which improves ergonomics and comfort. Tool pocket for electricians with compartments and attachments for screwdrivers, pliers, knife, voltmeter and hammer. Two durable leather nail and screw pockets with angled design and wide openings for easy access. Robust and innovative aluminum buckle for easy opening and closing.
Materials: Belt in 100% Nylon, 100% Cordura® - Polyamide. Leather pockets.

Electrician's pocket in heavy leather. For installers, fitters etc. 10 compartments for chisels, pliers, cutters, shell tools or smaller cordless screwdrivers. 3 compartments for insulating pliers etc. Holder for marking cord. Large pocket 15x18x3 cm, smaller pockets height 10 cm. Hammer holder. Knife holder. Rivet reinforced. Quick grip. Mounted on a strap with a width of up to 60 mm and an ergonomic belt.
Material: Leather.

Dirt and water resistant, lightweight tool pocket for electricians, installers and fitters. Easy to attach to a regular belt or utility belt. 3 tool pockets, a large pocket 15x13 cm and a smaller pocket 11x7 cm. Chisel holder and tape holder. Quick snap. Rivet reinforced.
Materials: Polyester and polyamide laminate.

Electrician's pocket for installers, assemblers etc. Ten different compartments for chisels, cutters, wrenches, shell tools, etc. Tape holder. Rivet reinforced. Quick grip. Mounted on a strap with a width of up to 60 mm and an ergonomic belt.
Material: Split leather.

Electrician's pocket for installers, assemblers etc. For insulated tools. Five chisel compartments, knife holder, tape holder. Compartment for a ruler or smaller screwdriver. Large compartment for pliers, peeling tools, etc. Three compartments for insulated pliers, hammer holder. Rivet reinforced. Quick grip. Mounted on a strap with a width of up to 60 mm and an ergonomic belt.
Material: Split leather.

Lightweight holder for electrical tools such as screwdrivers and nail guns. Attaches to regular belt or utility belt. Rivet reinforced. Quick-snap.
Materials: Strong leather.

Polyethylene apron. Suitable for food and pharmaceutical industries. Blocked for easier handling. Durable apron that protects the user against soiling. 50 pcs.

Thin chemical-resistant disposable glove with high tactility and dexterity. Tri-layer nitrile/neoprene glove for superior protection against harmful chemicals such as acids, solvents and bases. Silicone-free composition and processing guarantee better product protection. Extra soft material and ergonomic design provide outstanding fit, feel and flexibility for longer use.
Length: 28.5 cm.
Thickness: 0.19 mm .
AQL (tightness level): 0.65.

Approved/Certified according to:
CE category 3
EN ISO 21420 :2020
EN 388 2000X
EN ISO 374-1:2016
Type A (JKLOPST)
EN ISO 374-5:2016 Virus
ISO 18889 G1

Powdered short-term glove made of nitrile rubber. Does not contain silicone. An alternative for people who suffer from a so-called latex allergy. Examples of areas of use are ceramic industry, laboratories, food industry, etc. 100-pack.
Thickness: 0.12 mm.
Length: 24 cm.
AQL (tightness level): 1.5.

Approved/Certified according to:
CE category 3
EN 420:2003+A1 :2009
EN ISO 374-1:2016 Type B (JKPT)
EN ISO 374-5:2016 Viruses
EU Regulation 1935/2004
EU Regulation 2023/2006

High quality nitrile glove with rolled collar for single use. Smooth and puncture-proof. Resists a wide range of chemicals for longer than many other disposable nitrile gloves. Easy to put on and take off and has excellent grip in wet and dry conditions. Suitable for work in the food industry, mechanical industry, laboratories, graphic industry, glass manufacturing and handling of cytostatics. Powder free. Silicone free. Antistatic properties. 100-pack.
Length: 30 cm.
Thickness: 0.12 mm.
AQL (tightness rating): 1.5.

Approved/Certified according to:
CE category 3
EN ISO 21420:2020
EN ISO 374-1:2016 Type B ( JKPT)
EN ISO 374-5:2016 Virus
EN 421:2010
ISO 18889:2019
EU Regulation 1935/2004
EU Regulation 2023/2006

Powder-free disposable glove made of nitrile. With extra fingertip grip. Latex-free, non-sterile. Protective glove against risks with chemicals, microorganisms and viruses. 100-pack.
Length: 240 mm.
Thickness: 0.10 mm.
AQL (tightness rating) : 4.0.

Approved/Certified according to:
CE category 3
EN ISO 21420:2020
EN ISO 374-1: 2016+A1:2018 (Type C) KT
EN 374-4:2019
EN ISO 374-5:2016 Virus 

(HTML text not available)

Thin disposable glove in soft and strong nitrile rubber. Suitable for work in medicine, care, laboratories, HoReCa, food industry, shop, maintenance and cleaning. Equivalent elasticity and dexterity as with latex gloves. Micro-rugged surface structure on the fingertips for better grip. Resistant to grease, cleaning agents, etc. Silicone and powder free.
Length: 25 cm.
Thickness: 0.06 mm (palm).
AQL (tightness rating) : 1.5.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN ISO 374 -1:2016 Type B (KPT)
EN ISO 374-5:2016 Virus
EN 455
EN 1186

Engangs-kjemikaliehansker i nitril Chemstar. Pudderfri. Testet og godkjent for ymse kjemikalier. Mikrotekstur for best mulig grep. Tåler fett, rensemidler osv. Passer til laboratorier, kjemisk industri, bilindustrien, mekanisk industri, lett monteringsarbeid, næringsmiddelindustri.

Godkjent/sertifisert i henhold til:
CE kategori 3
EN 420:2003
EN1186
EN 455
EN 374:2016

Chemical-resistant powder-free disposable glove made of nitrile rubber. Micro-rugged surface structure for better grip. Durable rolled edge on the gloves that makes them easy to put on and take off, and provides increased protection against spills and drips from chemicals. Extra long. Approved for medical use. Approved for use in direct contact with all types of food, including foods with a high fat content.
Length: 28.5 cm.
Thickness: 0.11 mm (palm).
AQL (tightness degree): 1.5.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN ISO 374-1:2016 Type B (KPT)
EN ISO 374-5:2016 Viruses
EN 455
EN 1186

PE glove in disposable design, embossed. Main areas of use kitchen work, housekeeping, food handling, shop work, food handling, hotel and restaurant work. Suitable for food handling. 100-pack.
Length: 30 cm.
Thickness: 0.02 mm.

Approved/Certified according to:
CE category 1
EN 420:2003+A1:2009

Unpowdered vinyl glove for precision work. Latex free. Suitable for food handling with the exception of fatty foods.
Length: 24 cm
Thickness: 0.08 mm
AQL (density level): 1.5.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN ISO 374- 1:2016 Type B (KPT)
EN ISO 374-5:2016
IEC 61340-5-1 - ESD
EU Regulation 1935/2004
EU Regulation 10/2011

High quality vinyl glove (PVC). Unpowdered. Transparent. Waterproof. Packaging of 100 pcs. Suitable for handling in healthcare, laboratories and cleaning. Approved for medical use AQL 1.5. Also suitable for food handling with the exception of fatty foods.
Thickness: 0.10 mm.
Length: 240 mm.
AQL ( tightness degree): 1.5.
Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN ISO 374- 1:2016 Type B (KPT)
EN ISO 374-5:2016
IEC 61340-5-1 - ESD
EU Regulation 1935/2004
EU Regulation 10/2011

Unpowdered disposable latex glove, approved for medical use. Suitable for food handling with the exception of fatty foods.
Length: 25 cm.
Thickness: 0.10 mm.
AQL (density level ): 1.5.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN ISO 374-1:2016 Type B (KPT)
EN ISO 374-5:2016 Viruses
EU Regulation 1935/2004
EU Regulation 10/2011

Flexible disposable gloves in powder-free neoprene with good fingertip grip. Latex free. For precision work in corrosive environments. Suitable for food handling.
Thickness: 0.12 mm.
Length: 24 cm.
AQL (tightness rating): 1.5.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN ISO 374-1:2016 Type B (KPT)
EN ISO 374-5:2016 Viruses
EU Regulation 1935/2004
EU Regulation 2023/2006

Extra long disposable gloves in powder-free neoprene with good fingertip grip. Latex free. For precision work in corrosive environments. Suitable for food handling.
Thickness: 0.12 mm.
Length: 29 cm.
AQL (tightness rating): 1.5.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN ISO 374-1:2016 Type B (KPT)
EN ISO 374-5:2016 Viruses
EU Regulation 1935/2004
EU Regulation 2023/2006

Powder-free nitrile disposable glove. Hand protection against risks with chemicals and microorganisms. Extra fingertip grip. Approved for food handling. Latex-free.
Length: 24 cm.
Thickness: 0.10 mm.
AQL (tightness rating): 1 ,5.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN ISO 374-1:2016 Type B (JKT)
EN ISO 374-5:2016 Viruses
EU Regulation 1935/2004
EU Regulation 10/2011

Versatile disposable glove made of high-quality nitrile, powder-free and easy to put on and take off. Suitable for precision work and provides protection in environments with a risk of chemical splashes. Textured fingertips. Good fingertip feel and grip. Touchscreen function. Food approved and certified for use against viruses. Oil and grease resistant. Chlorinated inside. Phthalate-free and latex-free. 
Length: 24 cm. 
Thickness: 0.10 mm. 
AQL ( density): 1.5. 

Approved/Certified according to: 
CE category 3 
EN ISO 374-1:2016 /A1:2018 Type B (JKT) 
EN ISO 374-5:2016 Virus 
EN ISO 21420:2020

Disposable nitrile glove. Powder free. Latex free. Extra long. Approved for food handling. For precision work.
Length: 29 cm.
Thickness: 0.19 mm.
AQL (tightness rating): 1.5.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN ISO 374-1:2016 Type B (JKOPT)
EN ISO 374-5:2016 Viruses
EU Regulation 1935/2004
EU Regulation 10/2011

Extra long disposable glove in nitrile. Powder and latex free. Suitable for precision work. Approved for food handling.
Length: 29 cm.
Thickness: 0.19 mm.
AQL (tightness rating): 1.5.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN ISO 374-1:2016 Type B (JKOPT)
EN ISO 374-5:2016 Virus
EU Regulation 1935/2004
EU Regulation 10/2011

Extra long disposable glove with good fingertip feel in nitrile. Powder free. Accelerator free. Latex free. Suitable for precision work. Suitable for food handling.
Length: 28 cm.
Thickness: 0.15 mm.
AQL (tightness rating): 1.5.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN ISO 374-1:2016 Type B (JKPT)
EN ISO 374-5:2016 Virus
EU Regulation 1935/2004
EU Regulation 10/2011

Robust and durable, powder-free disposable glove in black nitrile. Withstands the chemicals on the industrial floor and grease from the grill, citric acid from juice production and seafood processing. Suitable, among other things, for engine, boat and machine service, industry and offshore, guard and security service, tattooing and graphic production. Suitable for food handling.
Length: 25 cm.
Thickness: 0.14-0.16 mm.
AQL (density level) : 1.5.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN ISO 374 -1:2016 Type B (JKP)
EN ISO 374-2
EN 1186

Disposable cap with double, latex-free elastic all around. Made of polypropylene. Suitable for direct contact with food.

Approved/Certified according to:
EN 1186

Round-stitched cap without screen in non-woven material. Food approved.

Approved/Certified according to:
EU Regulation 1935/2004
EU Regulation 2023/2006

(HTML text not available)

For use with Ergobelt, soft strap or other tool belt. Protects the back and provides high comfort. Stable ventilating back part. Shoulder straps that do not slip off when kneeling. With 2 pen pockets and 2 Quick-Snap pocket holders. Adjustable length. Durable clips.
Materials: Polyester/polyamide laminate.

A very thin and durable ESD glove with cut protection level B. Tegera CRF technology, for ESD protected work areas where cut protection and maximum dexterity are needed. Antistatic/ATEX, prevents electrostatic discharges from igniting explosive materials. Lining 18 gg in carbon fiber, CRF-Technology, glass fiber thread, HPPE, nylon, polyester and spandex. Smooth dipping in PU. Good grip and extremely good fingertip feel. Can be used on touch screen. Length 210-280 mm. 

Approved/Certified according to: 
CE category 2 
EN ISO 21420:2020 
EN 388: 2016+A1:2018 4X42B 
IEC 61340-5-1 - ESD 
EN 16350:2014

Thin, flexible and durable ATEX glove that prevents electrostatic discharges from igniting explosive materials in potentially explosive environments. Cut protection level C with Tegera CRF technology and ESD approved. Lining 18 gg, carbon fiber, CRF Technology, glass fiber thread, HPPE, polyester and spandex. 3/4-dipped with nitrile for extra good grip and protection in oily and wet environments. Sanded grip surface. Can be used on touch screen. Withstands contact heat up to 100°C. Latex free. Oil and grease resistant. Length: 220-270 mm. 

Approved/Certified according to: 
OEKO-TEX 100 
CE category 2 
EN ISO 21420 :2020 
EN 388:2016+A1:2018 3X41C 
EN 407:2020 X1XXXX 
IEC 61340-5-1:2016 - ESD 
EN 16350:2014

ESD glove of the highest quality. Smooth knitted nylon glove with carbon fiber thread. Suitable for the electronics industry, film handling, optics and laboratories.

Approved/Certified according to:
CE category 2
EN ISO 21420:2020
EN 388:2016+ A1:2018 113XX
IEC 61340-5-1 - ESD
EN 16350:2014

A very thin ESD glove with cut protection level C and Tegera CRF technology, for precision work where cut protection and maximum flexibility are needed. Antistatic/ATEX, prevents electrostatic discharges from igniting explosive materials. Lining 18 gg, carbon fiber, CRF Technology, glass fiber thread, HPPE, polyester and spandex. Comfortable and airy with good fingertip feel. Latex free. Length 205-250 mm. 

Approved/Certified according to: 
OEKO-TEX 100 
CE category 2 
EN ISO 21420: 2020 
EN 388:2016+A1:2018 1X42C 
IEC 61340-5-1:2016 - ESD 
EN 16350:2014

ESD glove of the highest quality. Nylon glove knitted with carbon fiber thread. PU-dipped fingertips, extremely flexible. Assembly in the electronics industry, film handling, optics and laboratories.

Approved/Certified according to:
CE category 2
EN ISO 21420:2020
EN 388:2016+ A1:2018 113XX
IEC 61340-5-1 - ESD
EN 16350:2014

ESD glove of the highest quality. Smooth knitted nylon glove with carbon fiber thread. PU-dipped palm. Suitable for the electronics industry, film handling, optics and laboratories.

Approved/Certified according to:
CE category 2
EN ISO 21420:2020
EN 388:2016+ A1:2018 3131X
IEC 61340-5-1 - ESD
EN 16350:2014

(HTML text not available)

An elastic easy-to-use shock-absorbing rope with a light weight. The rope is ideal for maintenance on e.g. cranes and traverses. In the tensioned position, the elastic fall arrester line drastically reduces the risk of the user tripping or getting stuck. The unique, shock-absorbing fabric material reduces the force of a fall. The fall arrester line is equipped with a 63 mm scaffolding hook and a galvanized coupling device. The Teflon treatment on the outer casing contributes to longer life by repelling oil, dirt and water that wears on the fabric. 
Don't forget the annual inspection. Contact your BIG company. 

Approved/Certified according to: 
EN 354 
EN 355

Fall protection package for scaffolding work. Consists of 2-point harness with shoulder strap in stretch material Duraflex. H-design for increased comfort and freedom of movement. D-ring on the back and strap loops on the chest for secure anchoring. Adjustable chest strap with Quick buckle. Drop indicators on the backplate. Approved for 140 kg. Fall protection block Turbolite 2 m with webbing and quick-acting brake mechanism. Supplied in storage bag.
PSS: Informative packaging with clear user instructions, legal requirements, complementary products and QR code linking to instructional video.
Don't forget annual inspection. Get in touch with your BIG company.

Fall protection harness with great freedom of movement. Light and flexible harness to take off and on. Anatomically and ergonomically designed pressure-relieving padding on the shoulders and back that minimizes fatigue and muscle overstrain. The user is kept drier and cooler thanks to high breathability. Optimal comfort around legs and shoulders. Side adjustment straps for increased ergonomic fit. H-design for legs that provides increased user comfort. D-ring at the front and SRL link at the back for easy connection of e.g. fall protection blocks. User-friendly holders enable users to attach, for example, the scaffolding hook when not in use. Clearly identifiable case indicators for hassle-free inspection. Improved visible stitch pattern for easy annual inspection. Lightweight aluminum Cobra quick release buckles. Embedded RFID tag for hassle-free inspection. Water repellent tape. Low weight. Approved for a maximum of 140 kg.
Don't forget the annual inspection. Get in touch with your BIG company.
PSS: Informative packaging with clear user instructions, legal requirements, complementary products and QR code linking to instructional video.

Approved/Certified according to:
EN 361:2002

2-point harness, anchoring loops in the chest and D-ring in the back. The Revolution harness is one of the most comfortable harnesses on the market. The patented movable PivotLink at waist height allows full freedom of movement when the user bends or crouches. The result is less tiring work and higher productivity. Quick release buckles for easy adjustment. The back plate ErgoArmor for extra protection, minimizes the effect of sharp/heavy carabiners and automatically retractable lifelines in the back. Duraflex webbing made of patented, Teflon-coated, elastomer fabric, specially made to stretch according to the user's movements and thus avoid creases or tangling. 
Don't forget annual inspection. Get in touch with your BIG company. 

Approved/Certified according to: 
EN 361:2002

Seat and climbing harness, to be used for manufacturing industry and rescue. Back and chest anchorage. The forces are distributed between the leg straps and the waist belt, which reduces the risk of orthostatic intolerance in a sitting position. V-shaped shoulder straps for comfort. Extra wide and padded waist belt. Foldable D-rings on the side. Padded leg straps. Back padding. Tool straps, snap fastener for secure strap placement and elastic webbing with shape memory. 
Don't forget annual inspection. Get in touch with your BIG company. 

Approved/Certified according to: 
EN 361:2002 
EN 358:2000 
EN 813:1997

Suitable Jupiter fan.
Combination filter - against organic gases/vapours and particles.

Filter adapter used for connecting Sundström filters to respirators with standard thread according to EN 148-1.

Filter holder which, together with the 3M gas/steam filter, provides a combination filter. Sold in pairs.
NOTE! only if particle filters are required on gas/steam filters, filter holder 501 should be used

Refill package with filter combination A2P3 R that protects against organic vapors, with a boiling point higher than 65°C and particles.
Contents: 2 pairs of gas filters, 4 pairs of particle filters and 1 pair of filter holders.

Maintenance-free mask against dust and other particles. It is light, hygienic and provides effective and comfortable protection. At the same time, it has a low breathing resistance. The masks have elastic headbands and aluminum nosebands. The nose bridge, with foam cushion over the bridge of the nose, provides a good and comfortable fit for most face shapes. The mask 8810 is cup-shaped.
Complies with EN 149:2001.

Maintenance-free filtering half mask against dust and other particles. Three-panel folding design with tabs for easy opening and placement. Soft nose foam material and inner protection. Built-in aluminum nose bridge for personal adjustment. With Cool Flow comfort valve that releases very warm air to reduce heat build-up and the risk of fogging on the glasses. Advanced Electret Filter Media (AEM) provides low initial breathing resistance. Does not contain natural rubber latex or PVC. Compatible with eye protection from 3M. Separately packed. Color coded for easy identification.
Conforms to EN 149:2001 and A1:2009.

Filtering half mask for welding fumes, with valve. Effective particle filter provides an FFP2-rated (NPF 12) protection against dust, fog and metal fumes. Layers of activated carbon filter out ozone gas generated during MIG, TIG and ARC welding. Specially treated outer shell provides improved flame resistance to minimize the impact of hot weld spatter. Cool Flow valve provides comfortable protection even in hot and humid conditions. Soft inner sealing ring provides increased comfort, which can be cleaned so the cover can be used multiple times. Cup-shaped design that keeps its shape and adapts well to the shape and size of the face. Adjustable braided headband that provides high comfort to the face, head and neck. Low profile design for use with welding shields and welding helmets. Rated for multiple use.

Maintenance-free mask with exhalation valve against dust and other particles. 3-field construction. It is light, hygienic and provides effective and comfortable protection. The mask can be folded and has an extra soft inner part that feels pleasant against the skin. The material of the nose pad is sweat absorbent. The headbands have constant elasticity and can be adjusted to most head sizes. The CPC exhalation valve facilitates exhalation and it reduces the build-up of heat, moisture and carbon dioxide in the mask. All the masks in the 9300 series are individually packed, for hygienic storage.
Conforms to EN 149:2001

Maintenance-free filtering half mask against dust and other particles. Three-panel folding design with tabs for easy opening and placement. Soft nose foam material and inner protection. Built-in aluminum nose bridge for personal adjustment. With Cool Flow comfort valve that releases very warm air to reduce heat build-up and the risk of fogging on the glasses. Advanced Electret Filter Media (AEM) provides low initial breathing resistance. Does not contain natural rubber latex or PVC. Compatible with eye protection from 3M. Separately packed. Color coded for easy identification.
Conforms to EN 149:2001 and A1:2009.

Cup-shaped filtering half-mask with exhalation valve. With soft seal against the face for comfortable use. M-shaped nose bridge. Color-coded cotton bands. Protects against dust, metal fumes, solid and liquid particles in concentrations up to 50 x the hygienic limit value.
Complies with EN 149:2001+A1:2009.

Filtering FFP3 half mask with exhalation valve. Equipped with Ventex-Ventil with extra large opening that reduces heat and moisture and eliminates fogging under glasses. Made of DuraMesh material, strong and durable structure that allows the mask to retain its shape. Comfortable nose pad and an adjustable strap with locking clip that is easy and safe to put on and take off. Protects against solid and liquid particles up to 50 X HGV.
Complies with EN149:2001+A1:2009

Felt sole with slip protection.
Colour: Grey.

Dressings that work both as plasters and bandages. Suitable for all types of small wounds regardless of heat, cold, wet or dry and remains in place even in water. Self-adhesive, without glue, and therefore does not stick to skin or hair. Simply tear off a suitable piece and place one or two wraps around the damaged area. Latex free. Beige color makes it easy to check if the bandage gets dirty or bleeds through. Recommended for clean environments or when a discreet color is preferred. Packed in a paper box that can be used as a dispenser.

Dressings that work both as plasters and bandages. Suitable for all types of small wounds regardless of heat, cold, wet or dry and remains in place even in water. Self-adhesive, without glue, and therefore does not stick to skin or hair. Simply tear off a suitable piece and place one or two wraps around the damaged area. Latex free. Blue color is recommended when handling food to be able to detect it visually, or when you want a bandage that looks fresh for a longer time. Recommended for Horeca businesses such as kitchens and restaurants. Packed in a paper box that can be used as a dispenser.

Dressings that work both as plasters and bandages. Suitable for all types of small wounds regardless of heat, cold, wet or dry and remains in place even in water. Self-adhesive, without glue, and therefore does not stick to skin or hair. Simply tear off a suitable piece and place one or two wraps around the damaged area. Latex free. Blue color is recommended when handling food to be able to detect it visually, or when you want a bandage that looks fresh for a longer time. Packaged in resealable plastic packaging that is easy to carry.

Dressings that work both as plasters and bandages. Suitable for all types of small wounds regardless of heat, cold, wet or dry and remains in place even in water. Self-adhesive, without glue, and therefore does not stick to skin or hair. Simply tear off a suitable piece and place one or two wraps around the damaged area. Latex free. Black color camouflages dirt or oil stains on the outside of the bandage. For heavy and dirty work environments, e.g. manufacturing industry, construction, vehicle repair. Packed in a paper box that can be used as a dispenser.

Consistent, high-quality textile patches. For fingertips. Extra large. The patches are allergy tested, easy to apply, flexible and easy to use. Refill that fits in Salvequick plaster machines 490700 and 51030130 as well as Salvequick wound care stations 51011006 and 51011009.
Each refill contains 15 plasters (87x58 (23) mm). 6 refills/box.

Lightly tailored fleece jacket with extended back and smooth decorative seams. Side pockets with zipper. Black elastic band edging at neck and cuffs. Elbow pads tone-on-tone in fleece. Drawstring at the bottom. Wash 40°C.
Material: 100% polyester, weight 280 g/m².

Fleece jacket with smooth decorative seams, side pockets with zipper and black elastic band edging in the neck and cuffs. Tone-on-tone fleece elbow pads, extended back and drawstring at the bottom. Wash 40°C.
Material: 100% polyester, weight 280 g/m².

Approved/Certified according to:
OEKO- TEX 100

Jacket in pique fleece with soft brushed inside and stand-up collar. Two slip pockets and internal phone pocket with zip. One-way zip in plastic and internal flap. Cuffs with elastic band. Wash 40°C.
Material: 100% polyester, weight 260 g/m².

Fleece jacket with two front pockets with zipper. 50 mm reflective tape, 2 turns around body and sleeve. ID card pocket. High visibility. Wash 40°C.
Material: 100% polyester fleece, weight 250 g/m².

Approved/Certified according to:
EN ISO 20471 class 2 - applies to sizes XS-S
EN ISO 20471 class 3 - applies to sizes M-3XL

Versatile fleece jacket in notice with zip and nylon lining. The fleece jacket is lined and can be worn as an outer jacket. Anti-pilling treated high quality fleece with brushed inside. Retractable ID card pocket. Front closure with one-way zip in plastic. Chest pocket with zipper. Two front pockets. Adjustable at the bottom with a drawstring. Adjustable cuffs with elastic. 50 mm wide reflexes on torso, sleeves and shoulders. Wash 40°C.
Material: 100% polyester, weight 250 g/m².

Approved/Certified according to:
EN ISO 20471 class 3

Fleece jacket in women's model with selected parts in softshell. Three outer pockets with zipper and two large inner pockets. Elastic inner cuffs with thumb holes and a foldable reflective tape. Hanger in the neck and a removable neck label to easily add your own sender. Wash 40°C.
Materials: Fleece 100% polyester, weight 330 g/m². Softshell 96% polyester, 4% spandex, weight 280 g/m².

Approved/Certified according to:
OEKO-TEX 100

Fleece jacket with selected parts in softshell. Three outer pockets with zipper and two large inner pockets. Elastic inner cuffs with thumb holes and a foldable reflective tape. Hanger in the neck and a removable neck label to easily add your own sender. Wash 40°C.
Materials: Fleece 100% polyester, weight 330 g/m². Softshell 96% polyester, 4% spandex, weight 280 g/m².

Approved/Certified according to:
OEKO-TEX 100

Varm fleecejacka i dammodell, tillverkad i skön teddyfleece av återvunnen polyester. Bröstficka med dragkedja. Två sidfickor med dragkedja. Mudd i ärmsluten. Tvätt 40°C. 
Material: 100% återvunnen polyester, vikt 270 g/m².

Varm fleecejacka i skön teddyfleece av återvunnen polyester. Bröstficka med dragkedja. Två sidfickor med dragkedja. Mudd i ärmsluten. Tvätt 40°C. 
Material: 100% återvunnen polyester, vikt 270 g/m².

Fleecejakke i damemodell i tykk, myk kvalitet med børstet innside, laget av 71% resirkulert polyester. Glidelåslukking og høy krage. Brystlomme med glidelås. Strikk ved ermeslutt og nederst. Vask 40°C.
Materiale: 71% resirkulert polyester, 29% polyester. Skulderparti og krage 100% resirkulert polyester.

Fleecejakke i tykk, myk kvalitet med børstet innside, laget av 71% resirkulert polyester. Glidelåslukking og høy krage. Brystlomme med glidelås. Strikk ved ermeslutt og nederst. Vask 40°C.
Materiale: 71% resirkulert polyester, 29% polyester. Skulderparti og krage 100% resirkulert polyester.

Fleece jacket in women's model, made in a stretchy and quick-drying material. Lockable YKK zippers in contrasting color on the front and in the pockets. UV protection UPF +30. Wash at 30°C.
Materials: 92% polyester, 8% elastane, weight 270 g/m².

Fleece jacket made in a stretchy and quick-drying material. Lockable YKK zippers in contrasting color on the front and in the pockets. UV protection UPF +30. Wash at 30°C.
Materials: 92% polyester, 8% elastane, weight 270 g/m².

Windproof and water-repellent warning jacket with breathing function. Zipper up the collar, chest pocket with zipper and internal D-ring. 2 front pockets with zipper, inner pocket with zipper. Drawstring at the bottom. Recessed elastic in cuffs. Zipper in lining for transfer and embroidery. Wash 40°C.
Material: 100% polyester fleece, weight 290 g/m².

Approved/Certified according to:
EN ISO 20471 class 2 - applies to sizes XS-S
EN ISO 20471 class 3 - applies to sizes M-3XL

Fleece jacket with a zip all the way up the collar with an inside turn. Phone pocket with zipper with outlet and earpiece slot. 2 front pockets with zipper, elastic band edging at cuffs and hem. Thumb grip. Extended back. Wash 40ºC.
Material: 100% polyester, polar fleece, weight 290 g/m².

Approved/Certified according to:
OEKO- TEX 100
EN ISO 20471 class 2 - applies to sizes 2XS
EN ISO 20471 class 3 - applies to sizes XS-3XL

Windproof and water-repellent fleece jacket with breathability. Airtech lining. Zipper all the way up the collar with wind flap on the inside. Chest pocket with zipper, 2 front pockets with zipper and elastic cuffs. Inner pocket and inner phone pocket with zipper. Reflective details and drawstring at the bottom. Wash 40°C.
Material: 100% polyester, weight 290 g/m². Airtech lining 100% polyester, weight 160 g/m². 

Approved/Certified according to: 
OEKO-TEX 100.

Eco-declared fleece jacket with details of contrasting jersey material. Stand collar. Long front zipper. Decorative tape in contrasting color on the shoulders. Chest pocket with zipper. 2 front pockets with zipper. Ribbed cuffs at cuffs and hem. Part of Fristad's environmentally-declared clothing collection Fristads Green, where the entire manufacturing chain is imbued with environmental thinking and innovative solutions to leave the smallest possible footprint on the environment. The garments are made from recycled polyester, have a clean design and are constructed with an advanced folding technique that reduces the number of pattern parts and seams. Efficient use of materials, few details and smart solutions save resources and energy during production. The polyester is dyed according to the e.dye process, which reduces water consumption by 75%. Environmentally declared according to the EPD, which shows a product's total environmental impact over its entire life cycle. Wash 40°C.
Materials: 100% recycled polyester, weight 285 g/m².

Approved/Certified according to:
OEKO -TEX 100

Jacket with smooth mottled exterior and brushed interior. Ripstop reinforcement on shoulders and underside of sleeves. Chest pocket with zipper. Two rivet-reinforced front pockets with zipper. Elastic band edging at the cuffs and hem. Reflective detail at cuffs and hem. Wash 40°C.
Material: 100% polyester, weight 300 g/m². Reinforcement 100% nylon.

Approved/Certified according to:
OEKO-TEX 100

Light and soft fleece jacket in Polartec Power Stretch microfleece with high thermal capacity. Elastic material that transports moisture, has high breathability and is quick drying. Smooth outside and brushed inside. Zipper up the collar, finished with a chain guard. Chest pocket with zipper. Contrast stitching. Wash 30°C.
Material: 90% polyester, 10% spandex, weight 230 g/m².

Approved/Certified according to:< BR>OEKO-TEX 100

Soft and elastic fleece jacket made of recycled material in four-way stretch. Smooth inside. Zipper all the way up the collar with an internal flap. Chest pocket with zipper. 2 front pockets with zipper. 2 inner pockets. Thumb grip. Elastic band edging at the cuffs and hem. Extended back. Wash 40°C. 
Materials: 100% recycled polyester, weight 335 g/m². 

Approved/Certified according to:  
OEKO-TEX 100

(HTML text not available)

Fleece jacket in women's model made in Polartec Power Stretch from partially recycled material. Transports moisture, is quick-drying and has good breathability. Smooth outside and brushed inside. Adjustable hood with drawstring. Zipper all the way up the collar. Raglan sleeves. 2 front pockets with zipper. 2 inner pockets. Extended cuffs in double fabric with thumb grip. Extended back. Wash 30°C. 
Material: 84% recycled polyester, 16% elastane, weight 224 g/m². 

Approved/Certified according to:  
OEKO-TEX 100 
Bluesign

Fleece sweater in Polartec Power Stretch made of partially recycled material. Transports moisture, is quick-drying and has good breathability. Smooth outside and brushed inside. Adjustable hood with drawstring. Zipper all the way up the collar. Raglan sleeves. 2 front pockets with zipper. 2 inner pockets. Extended cuffs in double fabric with thumb grip. Extended back. Wash at 30°C.
Materials: 84% recycled polyester, 16% elastane, weight 224 g/m². 

Approved/Certified according to:  
OEKO-TEX 100 
Bluesign

Light fleece jacket in Polartec material. YKK zipper at center front with hidden flap. Chin guard. Hand pockets with YKK zipper. Extended back end. Wash 40°C.
Materials: 100% recycled polyester, weight 159 g/m².

Approved/Certified according to:
Bluesign

Fleece jacket in warning design. Hand pockets with brushed lining and YKK zippers. Loop for ID card. Collar with brushed polyester on the inside. Two-way YKK zipper with chin guard at the front. VizLite DT stripes that glow in low or no light. AMANN threads. Wash 40°C. 
Material: 100% polyester, weight 280 g/m². 

Approved/Certified according to:  ;
EN ISO 20471:2013 class 2 - applies to sizes XS-S 
EN ISO 20471:2013 class 3 - applies to sizes M-5XL 
RIS-3279-TOM:2019 - applies orange color 
EN 14058:2017: 1, 1, X, X 
EN 13758-2:2003+A1:2006

Fleece sweater with a high collar and full YKK zipper at the front. Hand pockets with YKK zipper. Elastic cuffs with thumb holes. Wash 40°C.
Material: 100% recycled polyester, weight 410 g/m².

Approved/Certified according to:
EN 14058:2017 class 2

Fleece jacket with adjustable hood with drawstring. Hand pockets with YKK zipper. YKK zipper at the front. Elastic cuffs with thumb holes. Wash 40°C.
Materials: 100% recycled polyester, weight 410 g/m².

Approved/Certified according to:
EN 14058:2017 class 2

High collar fleece pullover with double fabric and YKK zipper with chin guard. Hand pockets with brushed lining and YKK zipper. Pre-bent sleeves, extended back end and flatlock seams. Without shoulder and side seams. Made from recycled Polartec fleece. Bluesign approved main material. Wash 40°C.
Materials: 92% polyester, 8% recycled polyester, weight 315 g/m².

Approved/Certified according to:
Bluesign
EN 14058 class 1

Varm och mjuk fleecejacka i dammodell, tillverkad av återvunnen polyester. Hel dragkedja framtill. Hög krage och raglanärmar. 2 dragkedjeförsedda sidofickor. Kontrasterande sticksöm. Förpackad i en biobaserad, komposterbar påse. Tvätt 40°C. 
Material: 100% återvunnen polyester, vikt 230 g/m². 

Godkänd/Certifierad enligt: 
OEKO-TEX 100

Varm och mjuk fleecejacka tillverkad av återvunnen polyester. Hel dragkedja framtill. Hög krage och raglanärmar. 2 dragkedjeförsedda sidofickor. Kontrasterande sticksöm. Förpackad i en biobaserad, komposterbar påse. Tvätt 40°C. 
Material: 100% återvunnen polyester, vikt 230 g/m². 

Godkänd/Certifierad enligt: 
OEKO-TEX 100

Fleece jacket with spacious front pockets with zip. Inside pockets, thumb grips at the cuffs and YKK front zip. Wash 40°C.
Material: 100% polyester, weight 280 g/m².

Soft and flexible fleece jacket. Open inner pockets. Spacious front pockets with zippers. Thumb grips at the cuffs. Wash 40°C.
Material: 100% polyester, weight 260 g/m².

Approved/Certified according to:
EN ISO 20471 class 3

Double-sided brushed fleece jacket in women's model. Front pockets and front opening with zipper. Flatlock seam on sleeve and elastic tape at sleeve end and bottom edge.
Material: 100% polyester, weight 280 g/m².

Double-sided brushed fleece jacket. Front pockets and opening with zipper. Flatlock seam on sleeve and elastic tape at sleeve end and bottom edge.
Material: 100% polyester, weight 280 g/m².

Windproof fleece jacket with breathability. Zippered side pockets and chest pocket. Pre-bent sleeves with Cordura reinforcements on the elbows. High protective collar and adjustable waist. Reflective details. Wash 40°C.
Material: 100% polyester, weight 300 g/m². Reinforcement 100% polyamide.

Warning jacket in fleece material. Full length zipper. Reflective warning details on shoulders, sleeves and bottom. Side pockets with zipper. Easily accessible ID card holder on the chest. Stripped design that leaves room for profile printing. Wash 40°C.
Material: 100% polyester, weight 235 g/m².

Approved/Certified according to:
EN ISO 20471 class 2 - applies to sizes XS
EN ISO 20471 class 3 - applies to sizes S-3XL

Fleece jacket in soft mesh fleece with good ventilation. Brushed inside. Two zippered hand pockets and water-resistant zippered chest pocket. Thumb hole, adjustable hem and extended back. Wash 40°C.
Material: 100% polyester, weight 210 g/m².

Fleece jacket with women's fit that can be worn alone or easily attached to South West's shell jacket 635 Alma shell jacket. Two side pockets and a pocket on the left chest. All pockets have zippers in a contrasting color with a black flap that can be changed if necessary. Wash 40°C.
Material: 100% polyester, weight 280 g/m².

Approved/Certified according to:
OEKO- TEX 100

Knitted fleece jacket with softshell details. One chest pocket with zipper. Two front pockets with zipper. Elastic cuffs. Drawstring at the bottom. Wash 40°C.
Material: 100% polyester.

Fleece jacket with a chest pocket and two front pockets with zippers. Drawstring at the bottom. Wash 60°C.
Material: 100% polyester, weight 260 g/m².

Approved/Certified according to:
OEKO- TEX 100
EN ISO 20471 class 3

Polar fleece vest with spacious front pockets with zip. Inner pockets. YKK front zipper. Wash 40°C.
Material: 100% polyester, weight 280 g/m².

Escape hood with filter for evacuation in case of chemical accidents. Filtering respirator in combination with hood for use during evacuation in case of chemical accidents. The hood is based on Sundström's silicone half mask, which is mounted in a hood made of chemical-resistant material. The hood is vacuum packed in an aluminum bag. The hood can be quickly and easily put on without prior adjustment. Equipped with combination filter SR 299-2 ABEK1-Hg-P3. The filter combination protects against all types of particles and the following types of gases: A1, organic gases and vapors, e.g. solvents, whose boiling point exceeds +65°C. B1, inorganic gases and vapors eg chlorine, hydrogen sulphide and hydrogen cyanide. E1, acid gases and vapors, eg sulfur dioxide and hydrogen fluoride. K1, ammonia and certain amines, eg ethylenediamine. Hg, mercury vapor. Lifespan 10 years. Approved as a portable escape hood and delivered in a flexible nylon emergency bag, which can be attached to the belt, for example.
Usage temperature: -20°C - +55°C 
Nominal protection factor: 50 
Weight: 680 g 

Approved/Certified according to: 
EN 403:2004 
EN 14387:2004 + A1:2008

Escape hood with filter for evacuation in case of chemical accidents. Filtering respirator in combination with hood for use during evacuation in case of chemical accidents. The hood is based on Sundström's silicone half mask, which is mounted in a hood made of chemical-resistant material. The hood is vacuum packed in an aluminum bag. The hood can be quickly and easily put on without prior adjustment. Equipped with combination filter SR 299-2 ABEK1-Hg-P3. The filter combination protects against all types of particles and the following types of gases: A1, organic gases and vapors, e.g. solvents, whose boiling point exceeds +65°C. B1, inorganic gases and vapors eg chlorine, hydrogen sulphide and hydrogen cyanide. E1, acid gases and vapors, eg sulfur dioxide and hydrogen fluoride. K1, ammonia and certain amines, eg ethylenediamine. Hg, mercury vapor. Lifespan 10 years. Approved for stationary storage only. 
Operation temperature: -20°C - +55°C 
Nominal protection factor: 50 
Weight: 680 g 

Approved/Certified according to: 
EN 403:2004 
EN 14387:2004 + A1:2008

Escape hood with filter for evacuation in case of fire and/or chemical accidents. Filtering respirator in combination with a hood for use during evacuation during fire and in case of chemical accidents. The hood is based on Sundström's silicone half mask, which is mounted in a hood made of flame-resistant and chemical-resistant material. The hoods are vacuum packed in an aluminum bag. The hood can be quickly and easily put on without prior adjustment. Equipped with gas filter SR 331-2 ABEK1-CO and particle filter SR 510 P3. The filter combination protects against carbon monoxide and other toxic gases and particles that can form in the event of a fire and also against the following types of gases: A1, organic gases and vapors, e.g. solvents, whose boiling point exceeds +65°C. B1, inorganic gases and vapors, eg chlorine, hydrogen sulphide and hydrogen cyanide. E1, acid gases and vapors, eg sulfur dioxide and hydrogen fluoride. K1, ammonia and certain amines, eg ethylenediamine. Lifespan 10 years. Approved as a portable escape hood and delivered in a flexible nylon emergency bag, which can be attached to the belt, for example.
Usage temperature: -20°C - +55°C
Nominal protection factor: 50
Weight: 700 g < br>
Approved/Certified according to:
EN 403:2004
EN 14387:2004 + A1:2008

Escape hood with filter for evacuation in case of fire and/or chemical accidents. Filtering respirator in combination with a hood for use during evacuation during fire and in case of chemical accidents. The hood is based on Sundström's silicone half mask, which is mounted in a hood made of flame-resistant and chemical-resistant material. The hoods are vacuum packed in an aluminum bag. The hood can be quickly and easily put on without prior adjustment. Equipped with gas filter SR 331-2 ABEK1-CO and particle filter SR 510 P3. The filter combination protects against carbon monoxide and other toxic gases and particles that can form in the event of a fire and also against the following types of gases: A1, organic gases and vapors, e.g. solvents, whose boiling point exceeds +65°C. B1, inorganic gases and vapors, eg chlorine, hydrogen sulphide and hydrogen cyanide. E1, acid gases and vapors, eg sulfur dioxide and hydrogen fluoride. K1, ammonia and certain amines, eg ethylenediamine. Lifespan 10 years. Approved for stationary storage only. 
Operation temperature: -20°C - +55°C 
Nominal protection factor: 50 
Weight: 700 g 

Approved/Certified according to: 
EN 403:2004 
EN 14387:2004 + A1:2008

An extra mild and creamy soap for the whole body. The soap is gentle on the skin, even with frequent washing. Lightly perfumed. Swan-labelled.

Moisturizing liquid soap with a mild composition. Contains glycerin to retain moisture. Without parabens, dyes and perfume.

Approved/Certified according to:
The Swan

Liquid soap with a mild fragrance. Cleanse the skin gently. Free from dyes.

Approved/Certified according to:
The Swan

Liquid soap enriched with 100% natural ingredients and glycerin, which helps to moisturize the skin during use. Pump bottle.

Gentle but effective liquid soap that can be used all over the body. Mildly perfumed. Can be used in environments with hard and/or salt water. Suitable for hand washing in any situation where a mild soap is desired. Contains no dyes. pH value approx. 5.

Approved/Certified according to:
The Swan

Extra caring, liquid soap for sensitive skin. For frequent use. Dermatologically tested. Perfume free. Skin-friendly pH value. Closed bottle with hygienic disposable pump. The bottle shrinks as it is used, which reduces waste volume by up to 70%. 
pH value: About 5.0. 

Approved/Certified according to: 
EU Ecolabel 
ECARF - hypoallergenic

A gentle, liquid soap with moisturizing ingredients. Dermatologically tested. Lightly perfumed. Skin-friendly pH value. Closed bottle with hygienic disposable pump. The bottle shrinks as it is used, which reduces waste volume by up to 70%. 
pH value: About 5.0. 

Approved/Certified according to: 
EU Ecolabel

Nourishing, moisturizing and pearlescent shower cream with a fresh scent that suits both women and men. Works as both shampoo and shower gel. Lightly perfumed.
Accessories: Tork Dispenser Liquid Soap, S1.

Battery-powered fan unit that protects against solid particles. With 2 flow rates, 185 l/min and 205 l/min. Easy-to-use, versatile respirator for environments that require particle filtration. Easy to adjust and maintain. Highly efficient filter that captures dangerous dust, mist and smoke and can be used for troublesome gases and vapours. Li-Ion battery with charging indicator. Slim design and low weight make it excellent for use in tight spaces. The polluting air is drawn in through a filter and purified. The air is then brought through a breathing tube up to the top of the head. Acoustic and visual alarm for low air flow or low battery level. A window on the fan provides quick identification of which filter is being used. IP53.
Conforms to SS-EN12941
Contents:
Starter package TR-315E+: Fan unit TR-302E+, particle filter, pre-filter, standard belt, flow indicator, high capacity battery, battery charger incl. charging plate and self-adjusting breathing air hose.
Fan unit TR-302E+: Fan unit with filter cap and air flow indicator.

Battery-powered fan unit that protects against particles, gases or vapors, or against a combination of these depending on the type of filter used. Low-profile construction means that the center of gravity is kept close to the back which provides high comfort. Fan with selectable 3-stage solution for the air flow. Easily adjusted with a button with two-step function. The air flow is set between 190-205 l/min. Easy to clean. Acoustic and visual alarm for low air flow or low battery level. Many filter combinations, in front of the filter both pre-filter and spark arrester can be mounted. In normal use the fan is IP53 sealed, with cleaning plugs fitted the enclosure protection is IP67.
Conforms to Cat III, EN12941
Contents:
Starter Kit TR-619E: Fan unit TR-602E, A2P filter, filter cover, 10 pcs pre-filter, 2 pcs spark arrester, Easy Clean belt, high capacity battery, battery charger with one station, airflow indicator and self-adjusting breathing air hose.
Fan unit TR-602E: Fan unit, 2 spark arrestors, and airflow indicator.

Stable and safe holder for 6 kg powder extinguisher for hanging in home, business, vehicle or boat. Easy to mount and makes it easy to access the fire extinguisher when needed. Suitable for powder extinguishers from Housegard, models PE6GEB, PE6TEA and PE6TJ.

Fresh air unit used together with Esab's welding helmets. Robust construction makes it suitable for all heavy duty welding applications. Provides proper protection against welding fumes and dust when welding, chiseling and grinding. Adjustable airflow from 170 l/min to 220 l/min to suit the environment and application. The airflow is indicated by the LED at the top of the unit. Audible and visual alarms for clogged filter and low battery level, giving the welder extra safety. Powerful Li-Ion battery pack that provides up to 8 h of use at air flow 220 l/min. Easy filter change.
Standard equipment: Fan unit, battery, intelligent charger, P3 filter, pre-filter, waist belt, air hose and Proban hose cover.
Dimensions (LxWxH):< /b> 185x100x160 mm.
Weight: 1000 g.
Tested and certified according to CE-EN12941 to be used together with < b>welding helmets Sentinel A50 (TH2), Warrior Tech (TH3), G50 (TH3), G40 (TH3), G30 (TH3) and F20 (TH2).

Front protection kit for 3M Speedglas welding helmet 9100FX/9100MP. For replacement of the front guard that holds the transparent, protective visor.

Button closure with three color-matching buttons. Raglan sleeve. Collar in the same material as the shirt. Wash 40°C.
Material: 100% polyester, moisture-wicking, cool dry fiber, weight 150 g/m².

Polo shirt in functional material. Buttons and the lower button placket in a different color. Eyelets under the sleeves and below the collar at the back. Edging in neck and slit. Logo in silicone on the right sleeve. Wash 40°C.
Material: 100% polyester, weight 200 g/m².

Approved/Certified according to:
OEKO- TEX 100

Glow Lite. Translucent color normal. Sufficient for 3 m².

GlowLite Nova color. Long-term demand. Sufficient for 3 m².

Pre-filter for the fan unit Jupiter's filter. These are placed under the protective cover. P denotes the particle filter type. SL means that the particle filter is approved for use against both solid and non-volatile liquid particles. (S=solid, L=liquid).

Apron with ties. Length 70 cm. Wash 85°C.
Material: 100% cotton, weight 240 g/m².

Approved/Certified according to:
OEKO- TEX 100

Protective apron in strong split leather for use when welding, among other things. Neck strap and waist strap in nylon.
Material: 100% split leather.

Apron with adjustable neck and waist strap. Reinforced bottom corners.
Materials: 100% PVC-coated polyester, weight 330 g/m².

Strong and strong apron in split leather that withstands heavy stress.
Materials: 100% leather.

Nonwoven Cellsoft compress, with sewn-on elastic bandage.
The size refers to the measurements of the compress.

First aid kit in pocket format.
Contents:
2 pcs Wound washer 94408
1 pc Plaster cloth various sizes 9 pcs/cloth 95124
1 pc First dressing 17 x 17 cm 92111

Small and flexible leisure kit with first aid products. Zipper on three sides makes the contents easy to see.
Contents:
4 pcs Wound cleaner 94408
1 fp Plaster cloth with 9 plasters 95124
1 pc First Dressing (large) 92111< br>1 pc First Dressing (small) 92109

The box is sealed to always be complete.
Wall holder included. The box is made of orange plastic to be seen well.
Contents:
2 pcs AKLA First Aid package, 91142
1 pc Protection package, 97234
1 pc Disaster blanket, 97187
1 pc Combi/Pressure dressing, 92502
2 pc BurnFree compress 5 x 15 cm, 94395
1 pc Burnfree compress 20 x 20 cm, 94377

First aid box with transparent lid. The content is adapted to today's requirements for the construction, forestry and manufacturing industries. The box is made of green plastic and fitted with hinges. Moisture and dustproof.
Dimensions: 25x17x12 cm
Contents:
10 pcs Wound washer 94408
2 pcs First Dressing 17 x 17 cm 92111
1 pc Plaster cloth 95124
1 pc Combi/Pressure dressing 92502
10 pc Compresses 94010
1 pc Mitella 93131
1 pc Surgical tape 25 mm 95471
1 pc Scissors 18.5 cm 97465
2 pc Finger tube 97437
1 pc Protection package 97234
1 pc Fingertip in leather 97429
1 pc First Aid instruction 97452
2 pc Elastic support bandage 8 cm 93417
1 pc BurnFree compress 5 x 15 cm 94395
2 pcs First Dressing 7.5 x 12 cm 92109

First Aid box for treating burns, easy to use with transparent expandable plastic pockets that provide a clear overview of the contents. The bag protects the contents against dust and moisture. The signal colors green and yellow make the bag well visible from afar. Suitable for workplaces with a high risk of burns, dealing with open flames, flames, hot surfaces, steam, hot liquids and ovens. With Burn Gel products that provide cooling and pain relief for first and second degree burns. Burn compresses in 3 different sizes including a large compress/face mask 30x40 cm.
Dimensions: 305 x 86 x 245 mm.
Contents:
1 pc Cederroth Burn Gel Burn Spray 100 ml 51011005
1 pc Cederroth Burn Gel Burn Compress/face mask 30 x 40 cm 51011014
2 pc Cederroth Burn Gel Burn Compresses 20 x 20 cm 51011015
4 pcs Cederroth Burn Gel Burn Compresses 10 x 10 cm 901900
1 pc Cederroth 4-in-1 Blood Stopper 1910
6 pcs Elastic fixation bandages
2 pairs Gloves
1 pc Fixing net
1 pc First Aid and burn instructions
1 pc Scissors

Robust and durable first aid bag that is easy to carry. The products are packed in transparent plastic pockets for a clear overview. The bag protects the contents against dust and moisture. The signal colors green and yellow make the bag well visible from afar. Suitable for injuries such as bleeding, small and large wounds, breathing, burns, circulatory failure and sprains. Weight approx. 1 kg.
Wall bracket available as accessory.
Dimensions: 310 x 247 x 80 mm
Contents:
3 pcs Cederroth 4 -in-1 Blood Stopper 1910
2 pcs. >1 pc Cederroth Soft Foam Bandage 6 x 40 cm
2 pc Cederroth Elastic bandage 8 cm x 4 m 1882
1 pc Cederroth Mitella 1889
1 pc Cederroth Rescue blanket with heat-reflecting aluminum side 1892
20 pc Salvequick Plasters
10 pcs Salvequick Wound washer
2 pcs Metallized compresses 20 x 40 cm
1 pc Fixing net
2 pairs of Gloves
1 pc First Aid instruction
1 pc Scissors

Robust and durable first aid bag. Practical handle with adjustable velcro strap to fasten the bag or carry it with you. The products are packed in transparent plastic pockets for a clear overview. The bag protects the contents against dust and moisture. The signal colors green and yellow make the bag well visible from afar. Suitable for injuries such as bleeding, small and large wounds, breathing, burns, circulatory failure and sprains. Weight approx. 600 g.
Dimensions: 231 x 190 x 78 mm.
Contents:
1 pc Cederroth 4-in-1 Blood Stopper 1910< BR>1 pc Cederroth 4-in-1 Mini Blood Stopper 1911
1 pc Cederroth Burn Gel Dressing Burn compress
2 pc Cederroth Safety Hand Cleanser Sterile wipes
1 pc Cederroth Breathing mask
1 pc Cederroth Elastic bandage 8 cm x 4 m 1882
1 pc. The help instruction
1 pcs Scissors

Sturdy first aid bag in hard plastic with simply designed products provided with clear instructions. Good for businesses that are often on the go. Patch dispenser on the outside. The bag protects the contents against dust and moisture. The signal colors green and yellow make the bag well visible from afar. Suitable for injuries such as bleeding, small and large wounds, breathing, burns, circulatory failure, sprains and minor eye injuries. Weight approx. 3.2 kg.
Dimensions: 420 x 300 x 118 mm.
Contents:
3 Cederroth 4-in-1 Blood Stoppers 1910
4 pcs Cederroth 4-in-1 Mini Blood Stopper 1911
2 pcs Cederroth Burn Gel Dressing Burn Compress
4 pcs Cederroth Safety Hand Cleanser Sterile Wipes
1 pc Cederroth Breathing Mask
2 pcs Cederroth Soft Foam Bandage 6 x 40 cm
1 pc. refill Salvequick Textile plasters (40 pcs) 6444
1 pc refill Salvequick Plastic plasters (45 pcs) 6036
10 pcs Salvequick Wound washer
1 pc Salvequick Cold pack Cooling bag
3 pcs Metallized compresses 20 x 40 cm
2 pcs Safety net
4 pairs of Gloves
1 pc First Aid instruction
1 pc Scissors
1 pc Tweezers

Complete Packout First Aid box. Made of impact-resistant polymer for durability in the workplace. IP65-rated for protection against moisture and dust. 5 removable and mountable compartments that keep the products in place during transport. Red colored to be quickly found in an emergency. Included in Milwaukee's modular storage system Packout.
Contents:
1 pc Burn dressing 60 x 80 cm (DIN 13152-A)
4 pc Disposable vinyl gloves
2 pc Triangular bandage 96 x 96 x 136 cm (DIN 13168)
3 dressings (DIN 13151-M)
1 dressing (DIN 13151-G)
1 dressing (DIN 13151-K)
2 pc Bandage 6 cm x 4 m (DIN 61634)
2 pc Bandage 8 cm x 4 m (DIN 61634)
2 pc Oval eye compresses 50 x 70 mm
1 pc Curved scissors (DIN 58279-B190)
1 pc Rescue blanket 210 x 160 cm
1 pc Self-adhesive tape 2.5 cm x 5 m (DIN 13019)
8 pc Self-adhesive bandage 10 cm x 6 cm (DIN 13019)
6 pc Compresses 10 x 10 cm
2 pcs Film bags, resealable
4 pcs Fingertip bandages 12 x 2 cm
4 pcs Fingertip bandages 4 x 7 cm
4 pcs Plasters 19 x 72 mm (DIN 13019)
8 pc Plaster 25 x 72 mm (DIN 13019)
1 pc Cooling compress
1 pc First Aid instruction
1 pc Contents list (DIN 13157)

Complete First Aid package for major injuries and high levels of preparedness.
Contents:
2 pcs First Aid 17 x 17 cm 92111
1 pcs Combi/Pressure dressing 92502
1 pc Mitella 93131
1 pc Scissors 18.5 cm 97465
1 pc Protective package 97234
1 pc Breathing cloth 97106

Made of 3 mm impact-resistant plastic. The cabinet is used as a central First Aid location as well as a refill depot for other First Aid equipment.
Dimensions: 33x44x15 cm
Contents:
40 pcs Wound washer 94418
100 pcs Plaster AKLA SOFT 20 x 72 mm 95601
2 pcs Plaster AKLA SOFT 1 m x 6 cm 95609
2 pcs Surgical tape 12 mm + 25 mm.
30 pcs Compresses 94010
4 pcs Elastic Ideal bandage 93417
1 pc First Aid package 91142
2 pc Fingertip in leather 97429
2 pc Mitella 93131
4 pc Finger tube 97437
8 pc First Aid 92109 + 92111
1 pc First Aid instruction 97432< br>2 pcs Protection package 97234
1 pc First Aid blanket 97199
1 pc Scissors, stainless 12.5 cm 97473
2 pcs BurnFree 94395

A handy little first aid bag that is easy to carry around. Durable, soft case with Velcro closure and straps that can be attached to the belt. For injuries such as bleeding, small and large wounds. Weight approx. 80 g.
Dimensions: 145 x 74 x 51 mm.
Contents:
1 pc Cederroth 4-in-1 Blood Stopper
6 pcs Salvequick Plaster
2 pcs Salvequick Maxi Cover
2 pcs Salvequick Wound Cleaner

Magnifying glass 51 x 108 mm can be mounted in Albatross or Eye-Tech welding helmets. An adapter is required to Eye-Tech for proper attachment of the magnifying glass.

Heatable, waterproof reinforcement for knees, elbows and other areas of trousers or other garments subject to high wear and tear. Applied with a transfer machine, 165°C, 5 bar, 15 seconds. 20-pack.
Dimensions: 150x250 mm.

Reinforcement transfer of Kevlar. Works as extra reinforcement to prevent the knee protector pocket from wearing out. Provides extra durability for the trousers. Applied with a transfer machine, 160-190°C, 5-6 bar, 30 seconds. Supplied in pairs.
Dimensions: 140x210 mm.

Effective heatable reinforcement that provides extra durable protection for exposed areas such as knees, thighs and elbows. Supplied in pairs.
Heating may only be done by professional dealers.
Materials: 72% Aramid, 24% Kevlar and 4% Elastane.

Storage box for safety glasses/goggles, hearing protection, half mask and gloves. The box protects against dust, dirt and water splashes. Comes with four different pictrograms: Goggles/goggles, hearing protection, half mask and gloves.
Dimensions: 236x225x125 mm

Storage box for safety glasses, hearing protection, filtering half-mask and gloves. The box protects against dust, dirt and water splashes. Comes with four different pictrograms: Safety glasses, hearing protection, filtering half mask and gloves.
Dimensions: 236x120x120 mm

Storage box made of impact-resistant plastic with tight-fitting lid. Intended for half mask with combination filter. Protects mask and filter from ambient contamination and increases service life. Equipped with both a carrying strap and holder for attachment to the belt.

Storage box made of impact-resistant plastic with tight-fitting lid. Intended for stationary storage of larger respiratory protection products, e.g. full mask SR 200 with filter and accessories. Protects mask and filter from ambient contamination and increases service life. Transparent lid that is held in place with the help of two clamps.

Storage bag for full mask with adjustable shoulder strap and plastic pocket for labeling.

Soft storage bag with a lid that closes with velcro. Intended for half mask with a filter. Can be attached to the belt. Volume 2.5 liters.

To attach to grid floors to provide luminescent emergency markings. Steel plate 1.5 mm. Supplied with 2 locking plates for mounting.

Gas and vapor filter for 3M full and half masks.
6051 - Against organic vapors from substances with a boiling point above 65°C.
6051i - Against organic vapors from substances with a boiling point above 65°C. With filter indicator.
6054 - Against ammonia and amines.
6055 - Against organic vapors from substances with a boiling point above 65°C.
6055i - Against organic vapors from substances with a boiling point above 65°C. With filter indicator.
6057 - Against organic vapors with a boiling point above 65°C as well as inorganic and acid gases.
6059 - Against organic vapors with a boiling point above 65° C as well as inorganic and acid gases and ammonia.
6075 - Against organic vapors from substances with a boiling point above 65°C / Formaldehyde.
Conforms to EN 143:2000 (6035) EN 141:2000 (6051, 6054, 6055, 6057, 6059, 6075)

Gas, vapor and particle filters for 3M full and half masks. 
6092 (for full and half masks) - Against organic vapors with a boiling point above 65°C, inorganic vapors, acid gases , ammonia and its derivatives, formaldehyde up to 10 ppm and particles. 
6096 (for full and half mask) - Against vapors and particles of metallic mercury, chlorine and solid and liquid particles.  
6098 (for full mask) - Against organic vapors from low-boiling substances with a boiling point of 65°C or below as well as solid and liquid particles. 
6099 (for full mask ) - Against organic vapors from substances with a boiling point above 65°C, inorganic gases, acid gases and ammonia as well as solid and liquid particles. 
Complies with EN 141:2000 (6092, 6096, 6099) EN 371:1992 (6098)

Self-adhesive and elastic gauze. Used as a support and fixation bandage. Wrap the bandage around the injury with the adhesive side against the skin. Cut at appropriate length. The pad is latex-free and consists of 36% cotton, 36% viscose and 28% polyamide. For single use. Not washable.

Traditional work glove sewn in goatskin. Fingertip reinforced with upper hand in woven cotton fabric. The glove has a thick teddy lining. The glove is a typical all-round glove.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2222X

Lined goat grain glove of guaranteed highest quality. Smooth, exceptional fit, index finger reinforced. Backhand made of gray nylon. Velcro closure. Extra index finger and fingertip reinforcement. For assembly work and other tasks in cold environments that place extremely high demands on dexterity and dexterity.

Approved/Certified according to:
CE category 2
EN 420:2003+ A1:2009
EN 388:2016 2121X
EN 511:2006 01X

A warm and comfortable thumb mitten in supple and durable black goat grain with faux fur lining. 5 cm collar. For cold work.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 3342X

Lined goat grain glove of very high quality. Smooth, with an exceptional fit and velcro fastening. For assembly work and other tasks in cold environments that place extremely high demands on dexterity and dexterity.

Approved/Certified according to:
CE category 2
EN 420:2003+ A1:2009
EN 388:2016 2111X
EN 511:2006 11X

Thin and flexible all-round glove with fingertip feel. With thin polyester lining. Reinforced index finger and fingertips.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2121X
EN 511:2006 11X

New - coming in September 
Thin and flexible goat grain glove suitable for work in cool and damp conditions. Wind and waterproof with breathable Aquathan membrane. Provides high fingertip sensation when handling small objects or tools. Elastic 360°. 

Approved/Certified according to: 
CE category 2 
EN 388:2016+A1:2018 2121X 
EN ISO 21420:2020 
EN 511:2006 111

Warm glove with a very good fit. Fully lined with Thinsulate for best comfort in chilly environments. The glove is completely waterproof, therefore keeping your hands pleasantly dry and warm. Goat grain has superior properties in terms of flexibility and durability, spandex on the upper hand for a better fit. Fits perfectly in environments where you need one. warm, waterproof and flexible glove. Warning colour.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2111X
EN 511 :2006 121

Flexible all-round glove in water-repellent goat grain with water- and windproof backhand.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2111X

A warm glove with a very good fit. Fully lined with Thinsulate for best comfort in chilly environments. The glove is completely waterproof and therefore keeps your hands comfortably dry and warm. Goat grain has superior properties in terms of flexibility and durability, spandex on the upper hand for a better fit. Fits perfectly in environments where you need one. warm, waterproof and flexible glove.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2121X
EN 511:2006 121

Waterproof winter glove in goat grain/spandex with neoprene cuff, lined with warming Thinsulate. Reinforced fingertips and Velcro closure.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2111X
EN 511:2006 111

Leather glove in goat grain for assembly and all-round work. With velcro for a better fit. Reinforced index fingers and fingertips make the gloves extra durable.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388: 2016 2111X

Thin glove in durable goat grain with fingertip feel. Top in cotton fabric with collar over wrist. Reinforced thumb and index finger. Good fit. Suitable for fine assembly, crafts, workshops, etc.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2011X

High quality unlined flexible goat grain glove. With index finger reinforcement for greater wear resistance. All-round glove where good dexterity is needed.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2121X

Goat grain glove of the highest quality in greased leather, water and oil repellent. Back hand in fleece, unlined. A good universal glove for most types of jobs.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388 :2016 2122X

Fully lined leather glove with goat grain in the palm, spandex in the palm and with fleece lining. Reinforced index finger and reinforced fingertips. Elastic 360°. Suitable for all-round work.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 3111X
EN 511:2006 11X

Fully lined leather glove with goat grain in palm, spandex in palm and Thinsulate lining 40g. Reinforced index finger, specially designed reinforced thumb and reinforced fingertips. Smooth warm lined glove with good fingertip feel. Waterproof. Elastic 180°. Suitable for all-round work.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2111X< br>EN 511:2006 111

Goat grain glove for winter use with Thinsulate lining 120 g that insulates against the cold and is wind and waterproof. Upper hand material goat grain, neoprene. Reinforced fingers and thumb. With Velcro and reflex.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2222X
EN 511:2006 221

High quality goat grain glove 0.7 mm. For winter use with Fleece Thinsulate lining 40g that insulates against the cold and is wind and waterproof. Upper hand material Spandex. Reinforced index finger with Touchscreen. Reflex and elastic 180°.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2111X< br>EN 511:2006 111
EN ISO 11640:2012

Fully lined leather glove for all-round work in cold environments. Extra flexible with good grip. Excellent fit with good fingertip feel. Premium quality water resistant goat grain leather and Thinsulate lining 40g. Works for touch screens. Elastic 180°.

Approved/Certified according to:
CE category 2
EN ISO 21420:2020
EN 388:2016+A1:2018 3121X
EN 511:2006 12X
EN ISO 11640:2018

Water-repellent leather glove in goat grain suitable for all-round work. With good fingertip feel, very durable. 180° elastic.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 2011X
EN ISO 11640:2012

Glove in durable goatskin. Reinforced palm provides extra comfort and protection when handling heavy objects. Keystone thumb for increased fit. Smartswipe touch function enables touch screen devices to be used without removing gloves. 

Approved/Certified according to: 
EN ISO 21420 
EN388: 2016 ( 2122X)

Soft case with zip, belt holder and snap lock.

Hard glasses case with zipper and carabiner. The case is universal and fits most glasses, goggles and sunglasses.

Soft glasses case with cleaning cloth.

Self-adhesive sticker with protective laminate.

Self-adhesive sticker with protective laminate.

Self-adhesive floor sticker with protective laminate.

Self-adhesive floor sticker with protective laminate.

Protective laminated floor sticker. For mounting on smooth surfaces.

Self-adhesive sticker with protective laminate.

Self-adhesive floor sticker with protective laminate.

Self-adhesive floor sticker with protective laminate.

Self-adhesive floor sticker with protective laminate.

Self-adhesive sticker with protective laminate.

Self-adhesive floor sticker with protective laminate.

Self-adhesive floor sticker with protective laminate.

Self-adhesive floor sticker with protective laminate.

Self-adhesive floor sticker with protective laminate.

Self-adhesive floor sticker with protective laminate.

Self-adhesive floor sticker with protective laminate.

Self-adhesive floor sticker with protective laminate.

Self-adhesive sticker with protective laminate.

Hard plastic. GlowLite Nova. Self-adhesive stair and floor marking.

Aluminum. GlowLite Nova. Self-adhesive stair and floor marking. 10 pcs/box

Foldable floor sign made of hard plastic. Double sided.

Folding floor sign. Double sided.

Folding floor sign, double-sided. Hard plastic.

Foldable floor sign made of hard plastic. Double sided.

Floor stand with top cover for 1 L TouchFREE automatic dispenser.

Primer, white base color. Sufficient for 7-9 m².

Chinstrap according to industry helmet standard (EN 397) for Milwaukee safety helmet Bolt 200.

A smart non-slip protection that is easy to take off and on and that increases your safety. The protection has six studs distributed throughout the foot
Material: TPE

Slip protection with 4 studs under the heel and 6 studs under the forefoot. The studs are made of stainless steel.

Adhesive.

Effective and comfortable maintenance-free half mask that provides protection against organic vapors and harmful particles. Centrally located exhalation valve helps reduce breathing resistance and prevents heat and moisture build-up in hot and humid conditions. Lightweight and well-balanced design with a low profile. Integrated filters make the mask ready for use and maintenance-free. Soft face seal with good fit, made of embossed, hypoallergenic materials. Adjustable head position and easy-to-attach neckband.
With filter class FFA2P3 RD that protects against organic vapours, with a boiling point higher than 65°C, up to 10x Hgv (Hygienic limit value) or 5000 ppm (depending on which is lower), and 20x Hgv for particles.
Supplied with resealable bag for hygienic storage.
Complies with EN 405:2001+A1:2009

Effective and comfortable maintenance-free half mask that provides protection against organic vapors, inorganic vapors, acid gases, ammonia and harmful particles. Centrally located exhalation valve helps reduce breathing resistance and prevents heat and moisture build-up in hot and humid conditions. Lightweight and well-balanced design with a low profile. Integrated filters make the mask ready for use and maintenance-free. Soft face seal with good fit, made of embossed, hypoallergenic materials. Adjustable head position and easy-to-attach neckband.
With filters in filter class FFABEK1P3 RD that protect against organic vapors, with a boiling point higher than 65°C, inorganic vapors and acid gases and ammonia up to 10x Hgv (Hygienic limit value) or 1000 ppm (whichever is lower), and 50x Hgv for particulates.
Supplied with resealable bag for hygienic storage.
Complies with EN 405:2001+A1:2009

Half mask made of thermoplastic elastomer. Easy to use, lightweight, low maintenance and available in 3 sizes which are color coded in different shades of grey. Designed for dual filters that provide even weight distribution and the best possible field of view. Mask with bayonet mount and used with replaceable twin filters against gases/vapours and/or particles. Equipped with an exhalation valve that facilitates exhalation and reduces the build-up of carbon dioxide, heat and moisture in the mask.
Filter not included.
Conforms to EN 140:1998

Half mask that offers comfort, durability and stability with a firm, lightly structured silicone face seal and a robust frame. Designed for heavy industry where there is a need for robust personal protective equipment, e.g. construction industry, mining industry, metal industry, shipbuilding industry and work with repair and maintenance. Adjustable strap stand. Overmolded with low profile. Bayonet mount. Smartly designed valve cover. Cool Flow exhalation valve. Quick Latch Drop Down function that makes the mask easy to put on and take off when exiting contaminated areas. Helmet and visor do not need to be removed when putting on and taking off the half mask.
Filter not included.
Conforms to EN 140:1998

Half mask with a balanced and secure fit. Made of soft silicone material for comfort and durability. Reduced pressure and fewer stress points. Fold-down function for a comfortable position when taking a break. Compatible with head and eye protection from 3M. Cool Flow exhalation valve provides a lower breathing resistance. Reduced accumulation of heat and sweat. Does not distort the voice when speaking. Downward flow of the exhaled air gives less risk of fogging on the eye protection/visor. Double filters that provide lower breathing resistance. Connection of S-200 for air supply as an option.
Filter not included.
Conforms to EN 140:1998

Reusable half mask with replaceable filters. Effectively protects against particles, gases and vapours. Made of soft silicone, sits comfortably against the face and the low breathing resistance increases comfort. The placement of the filters means you get a good weight distribution and a good field of vision.
Supplied with filters in filter class A2P3 R that protect against organic vapors, with a boiling point higher than 65°C and particles.
Contents: 1 mask frame, 1 pair of gas/steam filters, 2 pairs of P3 particle filters and 1 pair of filter holders.

Reusable respirator with smart and intuitive functions. Protects against particles and a wide range of gases and vapors when combined with 3M Secure Click filters. High breathability thanks to two double-flow filters in each respirator, creating four paths for airflow. The HF-800 series respirator and associated filter have an inhalation resistance of less than 5 mbar, measured at continuous 95 l/min. Equipped with speech membrane designed to facilitate communication during work. Rear-facing filter design for added compatibility with welding and grinding visors. Exhalation valve that directs the exhaled air and moisture downwards. Unique filter attachment, place the attachments against each other and press until you hear a click. Seal control with push button, quickly check that the respirator closes tightly. Patented flexible silicone face seal that provides high comfort and a soft feel against the face. Easily adjusted buckle, pull straps to tighten, squeeze wings to loosen.
Filter not included, order separately.

Soft and scratch-free hammer holder in ribbing. Detachable and removable. Attaches to the trousers' hems for hammer holders. Metal-free.

Hammer holder for tool belt Exelar EL302. Made of polyester with EVA backing and nubuck leather. Polyester 600 DN fabric.

Hammer holder with spring clips for tool belt Exelar EL302. Simple and quick placement of hammer. Made of polyester with EVA backing. Polyester 600 DN fabric.

Light and impact resistant. Temperature and weather resistant. Mounted on a strap with a width of up to 60 mm and an ergonomic belt. Quickgrip.
Material: Molded plastic.

Hammer holder with movable steel holder. Mounted on a strap with a width of up to 60 mm and an ergonomic belt. Quickgrip.
Materials: Leather and metal.

Hand disinfection intended for disinfection of hands. Effective against bacteria and many types of viruses such as cold virus, flu virus and calicivirus/winter vomiting disease. The product is an easy-to-apply gel, is ethanol-based and has an alcohol content of approx. 85% by volume. Contains glycerin that moisturizes the skin. 3 ml is rubbed into the hands for 30 seconds.
pH value: 6.0-8.0.
Approved according to standard EN 1500.
Biocidal product. Use biocides carefully and safely. Always read the label and product information before use.

Hand sanitizer containing 75% denatured ethanol by volume. Effective against bacteria, yeast and various types of viruses, such as influenza virus, HIV and Murine Norovirus. Contains two different moisturizers and is clinically tested to cope with daily care work.
pH value: 6.0-9.0.
Approved according to standard EN 1500.
Biocide product. Use biocides carefully and safely. Always read the label and product information before use.

Alcohol-based foam hand sanitizer with moisturizing ingredients. Used without water, it removes 99.999% of the most common bacteria in just 15 seconds. Unlike alcohol gel products, you don't get the feeling of sticky hands. The effective ingredients meet the EN1500 standard.
Biocidal product. Use biocides carefully and safely. Always read the label and product information before use.

Alcohol-based foam hand sanitizer with moisturizing ingredients. Used without water, it removes 99.999% of the most common bacteria in just 15 seconds. With Optidose foam pump for use in hygiene-sensitive environments. With just one push of the dispenser, the unique Optidose pump dispenses 1.5 ml of the product as foam; enough to keep hands wet for 20-30 seconds and provide full coverage, as recommended by WHO. Unlike alcohol gel products, you don't get the feeling of sticky hands. The effective ingredients meet the EN1500 standard.
Biocidal product. Use biocides carefully and safely. Always read the label and product information before use.

Alcohol-based, silicone-free hand sanitizing gel, which is proven completely bactericidal, viral and yeast-killing. The formula contains purified Hamamelis extract which gives the skin protection in addition to the product's disinfecting properties. Without perfume and dyes. Contains emollients. Skin-friendly formulation that prevents drying of the skin, even with frequent use. For use in care and food handling where careful hand hygiene is of the utmost importance. Also suitable for cafes, offices, toilets and public places and helps to prevent the spread of bacteria.
Biocidal product. Use biocides carefully and safely. Always read the label and product information before use.

Ekofekt Handdisinfection Balm disinfects and adds a softening substance to the skin. Suitable for healthcare and the food industry. Biodegradable. pH 6.0.
Biocide product. Use biocides carefully and safely. Always read the label and product information before use.

Hand disinfection in spray form. Contains 75% alcohol, acts quickly and is effective against both bacteria and viruses. The aerosol application allows easy access to the entire hand, even under the nails. Non-sticky and contains glycerin which helps to moisturize the skin. Undiluted product takes effect after 45 seconds. Unperfumed.
Meets EN14476 for enveloped viruses, including Corona virus.
Biocidal product. Use biocides carefully and safely. Always read the label and product information before use.

Unperfumed, hypoallergenic hand cream. Moisturizes the skin and counteracts cracks and dryness.

Light and warming wrist protection that also covers the thumb. Provides support, compression and warmth to the wrist area. Increases blood circulation. Relieves pressure and improves muscle coordination. Relieves pain and stabilizes the wrist. Used to relieve pain, stretching and inflammation. Fits both right and left wrists.
Prevents and rehabilitates:
Wrist and thumb instability, hypermobility and impingement syndrome.
Overexertion/strain of soft tissue around the wrist and thumb.
Wrist pain, inflammation and wear damage.
Can be machine washed at 40°C. Laundry bag recommended.
Materials: 1.5 mm foam of 70% SBR, 30% Neoprene. Cover of 100% Polyamide.

Wrist protection for the right wrist that provides high stability to both the wrist and the forearm. Contains a removable aluminum splint and is used for inflammation and overexertion. Classified as a medicinal product and sold individually. Can be machine washed at 40°C. Laundry bag recommended.
Materials: 70% SBR, 30% Neoprene. Cover of 100% Polyamide.

Wrist protection for the left wrist that provides high stability to both the wrist and the forearm. Contains a removable aluminum splint and is used for inflammation and overexertion. Classified as a medicinal product and sold individually. Can be machine washed at 40°C. Laundry bag recommended.
Materials: 70% SBR, 30% Neoprene. Cover of 100% Polyamide.

Combines the power of natural orange oil extract with hand scrub made from corn granules to provide highly effective cleaning. Removes heavily ingrained, industrial dirt. Everything from oil and grease to most paints and adhesives. Contains moisturizing ingredients so that regular use does not affect the skin's moisture balance.

Hand cleaner containing toxicologically safe solvents that remove ingrained oil-based dirt, e.g. oil, grease, smoke/ash and solvents, without damaging the skin. Contains the skin protection product Eucornol which minimizes the risk of skin irritation. Natural scrubs gently remove dirt without harming the skin.

Håndrens med milde løsemidler som fjerner vanskelig oppløselige skadelige stoffer, f.eks. beis, harpiks, bindemiddel og oljemaling. Astopon naturlige skrubber fjerner skånsomt smuss uten å skade huden. Fordi sammensetningen er konsentrert, kreves det bare en liten mengde for å fjerne skadelige stoffer.

Solvent-free hand cleaner for coarse dirt, e.g. oil, grease, smoke/ash and solvents. Astopon natural scrubs gently remove dirt without harming the skin. Contains the skin protection product Eucornol which minimizes the risk of skin irritation.

Approved/Certified according to:
EU Ecolabel

Solvent-free hand cleaner for very coarse dirt, e.g. oil, grease, smoke/ash and solvents. Astopon natural scrubs gently remove dirt without harming the skin. Contains the skin protection product Eucornol which minimizes the risk of skin irritation.

Approved/Certified according to:
EU Ecolabel

Gentle and effective hand cleaning for heavily soiled hands, with a patented combination of natural hand scrubs made from corn granules and lime extract. Perfect for washing away industrial dirt. Contains moisturizing ingredients that make the skin soft and supple after use.

For dirty and oily hands. Made up of fatty acids, among other things, to make your hands soft and smooth afterwards. Biodegradable. pH 7.0. Contains no aromatic solvents.

Natural hand cleanser with aloe, lanolin and jojoba oil to moisturize the skin and protect from irritation, even with regular use. Balanced PH. Made on citrus peel. Contains no synthetic solvents, mineral oil or petroleum distillates. Contains skin-friendly abrasive for deep cleaning. Rub the hand cleaner into dry hands until dirt or grease is dissolved. Rinse with water or wipe dry. Can be used with or without water. The hands smell fresh and natural. Easily removes embedded dirt, grease, soot, resins, ink, paint, glue, sealants and tar, etc.

Effectively copes with heavy dirt on the hands and the whole body without damaging the skin's barrier function. Does not contain solvents or friction agents.

Powerful hand cleaning gel that contains micropolyspheres and regreasing agents. The product quickly washes away ingrained oil, grease and dirt, and makes the skin soft and supple after use.

Hand cleaner with citrus that is solvent-free and contains a unique combination of surfactants and corn granules. The product effectively washes away oil, grease and general dirt, and contains regreasing agents that care for the skin.

Solvent-free hand cleaning. Contains corn granules that have a deep cleansing effect, and a regreasing agent that cares for the skin. Washes away ingrained oil, grease and general dirt.

Too heavily soiled hands. Soft and gentle on the skin. For workshops and industry. Suitable for removing oil, grease etc.

Glove holder that holds a steel or titanium glove in place, increasing both safety and comfort. Made of polyurethane foil. 100 pack.

Clip with belt clip for attaching gloves to the belt. Made of plastic.

Clip with holder for attaching gloves to trouser leg. Made of plastic.

A mild soap and shower shampoo for those who wash themselves often. With skin care products such as lactic acid and Aloe Vera. Biodegradable. pH 5.5.

Reusable hand warmers that provide instant warmth on cold winter days. Each activation lasts up to 90 minutes and can emit heat up to 54°C. Press the metal disc until it clicks and massage the gel pad, the gel will begin to crystallize and immediately release heat. Keep them in your gloves or pockets for a warming experience. To restore the crystallized pad to its original gel form, place the hand warmer in a pot of boiling water and simmer until the crystals have completely dissolved. Allow to cool completely before handling. Supplied in 2-packs.

Activated by breaking the packaging and then provides up to 8 hours of heat. Odorless and nature-friendly.

Durable and flexible painter's trousers with ripstop. Stretch panel in crotch, calf and knee protection pocket. Prebent legs. Back pockets. Leg pocket with lid, pen pocket and inner phone pocket in mesh. Insert pockets with a zip pocket. Knee protection pockets, top-fed with lid and velcro closure. Stretch material both outside and inside for a better ergonomic fit. Nail pockets. Adjustable leg ends with buttons. Knee pockets reinforced with Cordura stretch. Cordura-reinforced putty pocket and nail pockets. Fly with plastic zip. Hammer handle in the side. D-ring. Reflective details. Wash 60°C.
Materials: 60% cotton, 40% polyester, weight 250 g/m².

Approved/Certified according to:< br>EN 14404 - together with Blåkläder's knee pads 4027, 4057, 4058 and 4032

(HTML text not available)

Craft trousers with stretch panels in crotch, knees and leg. Fly with plastic zip. Nail pockets, slip pockets and back pockets. Leg pockets with bellows, zip, pen pocket and knife pocket. Internal phone pocket. External knee protection pocket. D-ring in the waistband. Prebent legs. Wash 40°C.
Materials: 65% polyester, 35% cotton, weight 166 g/m².

Approved/Certified according to:< br>EN 14404 - together with Blåkläder's knee protector 4057