Andningsskydd

Battery-powered fan unit that, together with filters and an approved facepiece, is part of Sundström's fan-assisted breathing protection system. Can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. The fan is equipped with a filter and the filtered air is fed via a breathing tube to the face part. The overpressure that then forms prevents the penetration of surrounding contaminants. Powered by the included 14.4 V Li-Ion battery, which provides an operating time of up to 7 h. Charging time approx. 2 h. Equipped with two filters/filter combinations. Start, stop and selection of operating mode are managed with the same operating button. Display with symbols for different operating conditions. Alarm with vibrations and sound/light signals in case of obstructions in the air flow. Automatic control of air flow with compensation for air pressure and temperature. The enclosure protection of the electronics is approved according to IP67. The fan unit can be used together with hoods SR 520, SR 530, SR 561, SR 562, SR 601, SR 602, screen SR 570, welding visor SR 570/SR 574 half mask SR 900, full mask SR 200, welding visor SR 592, helmet with visor SR 580 and welding visor/helmet with visor SR 584/SR 580.
Contents: Fan SR 500, 1 standard battery 14.4 V Li-Ion 2.25 Ah, battery charger SR 513, belt SR 508, 2 pcs particle filter P3R SR 510, 2 pcs filter adapters SR 511, 2 pcs pre-filter SR 221, 2 pcs pre-filter holder SR 512, flow meter SR 356, cleaning napkin SR 5226, 3 pcs plugs for fan and user manual.
Air flow: 175 l/min
Using temperature: -10°C - +55°C
Assigned protection factor: 200 (TH3) together with SR 520, 530, 561, 562, 570, 574, 580, 584, 592, 601, 602, 604
Assigned protection factor: 1000 (TM3) together with SR 200, 900
Nominal protection factor: 500 (TH3) together with SR 520, 530, 561, 562, 570, 574, 580, 584, 592, 601, 602, 604
Nominal protection factor: 2000 (TM3) together with SR 200, 900
Weight: 1650 g

Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 12942:1998 + A2:2008

Battery-powered fan unit that is explosion-proof and specially intended for use in explosive atmospheres. Included together with filters and an approved face piece in Sundström's fan-assisted breathing protection system. Can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. The fan is equipped with a filter and the filtered air is fed via a breathing tube to the face part. The overpressure that then forms prevents the penetration of surrounding contaminants. Powered by the included 13.5 V NiMh battery, which provides an operating time of up to 6.5 h. Charging time approx. 2 h. Equipped with two filters/filter combinations. Start, stop and selection of operating mode are managed with the same operating button. Display with symbols for different operating conditions. Alarm with vibrations and sound/light signals in case of obstructions in the air flow. Automatic control of air flow with compensation for air pressure and temperature. The enclosure protection of the electronics is approved according to IP67. The fan unit can be used together with hoods SR 520, SR 530, SR 561, SR 562, SR 601, SR 602, SR 604, visor SR 540 EX, SR 570 and helmet with visor SR 580 or full mask SR 200.
Contents: Fan SR 500 EX, 1 battery 13.5 V NiMh 2.1 Ah, battery charger SR 513 EX, belt, 2 filter adapters SR 511, 2 particle filters P3R SR 510, 2 frp pre-filters SR 221 , 2 pre-filter holders, flow meter SR 356, cleaning wipe SR 5226, Vaseline tube, plug kit and user manual. 10°C - +40°C
Assigned protection factor: 200 (TH3) together with SR 540 EX, SR 570, SR 580
Assigned protection factor: 1000 (TM3) together with SR 200
Nominal protection factor: 500 (TH3) together with SR 540 EX, SR 570, SR 580
Nominal protection factor: 2000 ( TM3) together with SR 200
Weight: 1840 g

Approved/Certified according to:
EN 12941:1998 + A2:2008< br>EN 12942:1998 + A2:2008
EN 60079-0:2012
EN 60079-11:2012
EN 13463-1:2009
ATEX 2014/34/EU

Battery-powered fan unit that, together with filters and an approved facepiece, is part of Sundström's fan-assisted breathing protection system. Can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. The fan is equipped with a filter and the filtered air is fed via a breathing tube to the face part. The overpressure that then forms prevents the penetration of surrounding contaminants. Powered by the included 14.4 V Li-Ion battery, which provides an operating time of up to 12 h. Charging time approx. 3 h. Equipped with two filters/filter combinations. Start, stop and selection of operating mode are managed with the same operating button. Display with symbols for different operating conditions. Alarm with vibrations and sound/light signals in case of obstructions in the air flow. Automatic control of air flow with compensation for air pressure and temperature. The enclosure protection of the electronics is approved according to IP67. The fan unit can be used together with hoods SR 520, SR 530, SR 561, SR 562, SR 601, SR 602, screen SR 570, welding visor SR 570/SR 574 half mask SR 900, full mask SR 200, welding visor SR 592, helmet with visor SR 580 and welding visor/helmet with visor SR 584/SR 580.
Contents: Fan SR 500, 1 HD battery 14.4 V Li-Ion 3.5 Ah, battery charger SR 513, belt SR 508, 2 pcs particle filter P3R SR 510, 2 pcs filter adapters SR 511, 2 pcs pre-filter SR 221, 2 pcs pre-filter holder SR 512, flow meter SR 356, cleaning napkin SR 5226, 3 pcs plugs for fan and user manual.
Air flow: 175-240 l/min
Using temperature: -10°C - +55°C
Assigned protection factor: 200 (TH3 ) together with SR 520, 530, 561, 562, 570, 574, 580, 584, 592, 601, 602, 604
Assigned protection factor: 1000 (TM3) together with SR 200, 900
Nominal protection factor: 500 (TH3) together with SR 520, 530, 561, 562, 570, 574, 580, 584, 592, 601, 602, 604
Nominal protection factor: 2000 (TM3) together with SR 200, 900
Weight: 1650 g

Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 12942:1998 + A2:2008

(HTML text not available)

(HTML text not available)

(HTML text not available)

(HTML text not available)

Complete package with battery-powered fan unit SR 700 and full mask SR 200 with polycarbonate visor, which together with approved particle filters SR 510 P3 R or SR 710 P3 Rlter form a fan-assisted respiratory protection system. The fan is equipped with a filter and the filtered air is fed via a breathing tube to the face part. The overpressure that then forms prevents the penetration of surrounding impurities. Powered by the included 14.4 V Li-Ion battery, which provides an operating time of up to 6 h. Charging time approx. 2 h. Equipped with two particle filters. Start, stop and selection of operating mode are managed with the same operating button. Display with symbols for different operating conditions. Alarm with sound/light signals in the event of obstructions in the air flow. Automatic control of the air flow. The enclosure protection of the electronics is approved according to IP67. Full mask with excellent fit, high protective effect, eye protection and very good breathing comfort for the toughest areas of use. Made of silicone. Fits most face sizes. Spherical visor in scratch-resistant polycarbonate that provides a large field of vision. Equipped with three inhalation and two exhalation valves, which gives a very low breathing resistance. Materials and color pigments in the mask body are FDA and BGA approved for food, which minimizes the risk of contact allergies. Adjustable strap stand.
Contents: Full mask SR 200 PC with rubber strap stand, fan SR 700, filter adapter SR 280-3, breathing hose SR 551 rubber, standard battery, battery charger SR 513, rubber belt SR 504, 2-pack particle filter SR 510 P3 R, 2-pack filter adapter, 10-pack pre-filter SR 221, 2-pack pre-filter holder, flow meter, plug set, cleaning wipes and user manual.
Air flow: 175 l/min
Usage temperature: -10°C - +55°C
Assigned protection factor: 1000 (TM3)
Nominal protection factor: 2000 ( TM3)
Weight: 1550 g

Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 12942 :1998 + A2:2008
EN 136:1998 class 3
EN 166:2001

Half mask with excellent fit, high protective effect and very good breathing comfort for the toughest areas of use. Made of silicone. The mask is equipped with two exhalation valves that provide a very low exhalation resistance. The valve covers with screens effectively protect the exhalation membranes against dust and dye. Materials and color pigments in the mask frame are FDA and BGA approved for food, which minimizes the risk of contact allergies. The mask's easily adjustable elastic band stand is designed as a v-loop and has a large cupped head plate, which contributes to a comfortable and secure fit. The mask is used as filter protection in combination with filters from Sundström's filter range or in combination with compressed air additive SR 307, which then constitutes a breathing apparatus with continuous flow for connection to compressed air.
Contents: Half mask, pre-filter holder, cleaning napkin, ID label, pre-filter, storage bag and user manual.
Operating temperature: -10°C - +55°C
Assigned protection factor: 20
Nominal protection factor: 48 (P3), 50 (GasX P3), 48 (GasX P3)
Weight: 180 g

Approved/Certified according to:
EN 140:1998

Half mask in Premium Plus Pack. With excellent fit, high protective effect and very good breathing comfort for the toughest areas of use. Made of silicone. The mask is equipped with two exhalation valves that provide a very low exhalation resistance. The valve covers with screens effectively protect the exhalation membranes against dust and dye. Materials and color pigments in the mask frame are FDA and BGA approved for food, which minimizes the risk of contact allergies. The mask's easily adjustable elastic band stand is designed as a v-loop and has a large cupped head plate, which contributes to a comfortable and secure fit. The mask is used as filter protection in combination with filters from Sundström's filter range or in combination with compressed air additive SR 307, which then forms a breathing apparatus with continuous flow for connection to compressed air.
Contents: Half mask (size M/L ), 1 pc particle filter SR 510 P3 R, 1 pc gas filter SR 297 ABEK1, 5 pc pre-filter, pre-filter holder, cleaning tissue, ID label, user manual and storage box.
Use temperature: -10°C - +55°C
Assigned protection factor: 20
Nominal protection factor: 48 (P3), 50 (GasX P3), 48 (GasX P3)
Weight: 180 g

Approved/Certified according to:
EN 140:1998

Half mask with excellent fit, high protective effect and very good breathing comfort for most areas of use. Made of TPE/PP, thermoplastic elastomer and polypropylene. The mask is equipped with two exhalation valves that provide a very low exhalation resistance. The valve covers with screens effectively protect the exhalation membranes against dust and dye. Materials and color pigments in the mask body are FDA-approved for food, which minimizes the risk of contact allergies. The mask's single adjustable elastic band stand is designed as a v-loop and has a large cupped head plate, which contributes to a comfortable and secure fit. Used together with filters from Sundström's filter program, together with waist-worn filter SR 905 according to EN 12083, together with compressed air additive SR 307 or SR 507 which then functions as a breathing apparatus with continuous air flow according to EN 14594:2005, together with battery-powered fan unit SR 500 or SR 700 in Sundström's fan-assisted breathing protection system according to EN 12942:1998.
Contents: Half mask, pre-filter holder, cleaning tissue, ID label, pre-filter, storage bag and user manual.
Use temperature: - 10°C - +55°C
Assigned protection factor: 20
Nominal protection factor: 48 (P3), 50 (GasX P3), 48 (GasX P3 )
Weight: 138 g

Approved/Certified according to:
EN 140:1998

Half mask in Basic Pack. With excellent fit, high protective effect and very good breathing comfort for most areas of use. Made of TPE/PP, thermoplastic elastomer and polypropylene. The mask is equipped with two exhalation valves that provide a very low exhalation resistance. The valve covers with screens effectively protect the exhalation membranes against dust and dye. Materials and color pigments in the mask body are FDA-approved for food, which minimizes the risk of contact allergies. The mask's single adjustable elastic band stand is designed as a v-loop and has a large cupped head plate, which contributes to a comfortable and secure fit. Used together with filters from Sundström's filter program, together with waist-worn filter SR 905 according to EN 12083, together with compressed air additive SR 307 or SR 507 which then functions as a breathing apparatus with continuous air flow according to EN 14594:2005, together with battery-powered fan unit SR 500 or SR 700 in Sundström's fan-assisted breathing protection system according to EN 12942:1998.
Contents: Half mask (size M), 1 pc particle filter SR 510 P3 R, 5 pcs pre-filter, pre-filter holder, cleaning napkin, ID label, user manual and storage box .
Usage temperature: -10°C - +55°C
Assigned protection factor: 20
Nominal protection factor: 48 (P3), 50 (GasX P3), 48 (GasX P3)
Weight: 138 g

Approved/Certified according to:
EN 140:1998

Full mask with excellent fit, high protective effect, eye protection and very good breathing comfort for the toughest areas of use. Made of silicone. Fits most face sizes. Spherical visor made of laminated glass that provides a large field of vision. Equipped with three inhalation and two exhalation valves, which gives a very low breathing resistance. The exhalation valves' valve caps with shields effectively protect valves and diaphragms against dust and dye. The design and placement of the exhalation valves improve the possibilities of communication. Materials and color pigments in the mask body are FDA and BGA approved for food, which minimizes the risk of contact allergies. Adjustable elastic band stand is attached to the visor frame and to the exhalation valves, which together with a large head net contributes to a comfortable and safe fit.
The mask is used either as filter protection in combination with filters from Sundström's filter range or as breathing apparatus with continuous flow together with compressed air additive SR 307 .
The mask completed with hose SR 550 (PU) or SR 551 (rubber), it can also be used as a facepiece together with Sundström's fan SR 500 or SR 700.
Together with fan SR 500 EX, it is approved for use in explosive atmosphere.
Contents: Full mask, filter adapter, pre-filter, pre-filter holder, cleaning wipe, ID label and user manual.
Use temperature: -10°C - +55 °C
Assigned protection factor: 500 (P3), 500 (GasX)
Nominal protection factor: 1000 (P3), 2000 (GasX), 1000 (GasX P3)
Weight: 450 g

Approved/Certified according to:
EN 136:1998 class 2
EN 12942:1998 class TM3 (combined with fan SR 500/SR 700)
EN 14594:2005 (combined with compressed air additive SR 307)
EN 12942:1998 class TM3, ATEX 2014/34/EU (combined with fan SR 500 EX)

Full mask with excellent fit, high protective effect, eye protection and very good breathing comfort for the toughest areas of use. Made of silicone. Fits most face sizes. Spherical visor in scratch-resistant polycarbonate that provides a large field of vision. Equipped with three inhalation and two exhalation valves, which gives a very low breathing resistance. The exhalation valves' valve caps with shields effectively protect valves and diaphragms against dust and dye. The design and placement of the exhalation valves improve the possibilities of communication. Materials and color pigments in the mask body are FDA and BGA approved for food, which minimizes the risk of contact allergies. Adjustable elastic band stand is attached to the visor frame and to the exhalation valves, which together with a large head net contributes to a comfortable and safe fit.
The mask is used either as filter protection in combination with filters from Sundström's filter range or as breathing apparatus with continuous flow together with compressed air additive SR 307 .
The mask completed with hose SR 550 (PU) or SR 551 (rubber), it can also be used as a facepiece together with Sundström's fan SR 500 or SR 700.
Together with fan SR 500 EX, it is approved for use in explosive atmosphere.
Contents: Full mask, filter adapter, pre-filter, pre-filter holder, cleaning wipe, ID label and user manual.
Use temperature: -10°C - +55 °C
Assigned protection factor: 500 (P3), 500 (GasX)
Nominal protection factor: 1000 (P3), 2000 (GasX), 1000 (GasX P3)
Weight: 450 g

Approved/Certified according to:
EN 136:1998 class 3
EN 166:2001
EN 12942:1998 class TM3 (combined with fan SR 500/SR 700)
EN 14594:2005 (combined with compressed air additive SR 307)
EN 12942:1998 class TM3, ATEX 2014/34/EU ( combined with fan SR 500 EX)

Gas filter, combi filter and particle filter intended for use together with Sundström fan units.
See product sheet for detailed information on each filter.

Gas filters, combi filters and particle filters intended for use together with Sundström's half and full masks.
See product sheet for detailed information on each filter.

Maintenance-free mask with exhalation valve against dust and other particles. 3-field construction. It is light, hygienic and provides effective and comfortable protection. The mask can be folded and has an extra soft inner part that feels pleasant against the skin. The material of the nose pad is sweat absorbent. The headbands have constant elasticity and can be adjusted to most head sizes. The CPC exhalation valve facilitates exhalation and it reduces the build-up of heat, moisture and carbon dioxide in the mask.
Conforms to EN 149:2001

Pre-filter which is intended to capture coarse particles and thereby extend the life of the particle filters SR 510 P3 R and SR 710 P3 R, combination filter SR 299-2 ABEK1-Hg-P3 R and SR 599 A1BE2K1-Hg-P3 R. The pre-filter is placed in the pre-filter holder which is then snapped onto the particle filter or combination filter.

Breathing hose that fits Sundström's face shields SR 540 and SR 540 EX. Made of polyurethane and polyamide. Length 0.9 m. 

Face shield with polycarbonate visor and hard head top. Folding visor with special coating that is impact and scratch resistant while also being chemical resistant. Headband with steering wheel adjustment for high comfort, low weight. Comfortable face seal against dust, spray fumes and chemicals. Increased control and comfort with valve so the user can direct the airflow inside the head cover. The design of the visor provides excellent side and downward vision with good optical clarity. Prepared for use with Versaflo fan assembly. Meets the highest performance requirements (TH3) for this type of product when used with specific Versaflo fan units.

Face shield with integrated protective helmet. Polycarbonate visor with special coating that is impact and scratch resistant while also being chemical resistant. Headband with steering wheel adjustment for high comfort, low weight. Can be used in conjunction with 3M Versaflo V-500E regulator, TR-300 battery powered fan unit and Jupiter battery powered fan unit. For electronic hearing protection, bracket Z3 AF/2 is used.
Protection classes:
SS-EN12941 TH3 connected to fan unit Versaflo TR-300 and Versaflo TR-600.
SS-EN12941 TH2 connected to fan unit Jupiter .
SS-EN14594 3B connected to regulators Versaflo V-500E, V-100E and V-200E.

Face shield with hard head top or integrated protective helmet. Polycarbonate visor with special coating that is impact and scratch resistant while also being chemical resistant. Headband with steering wheel adjustment for high comfort, low weight. Comes with complete Adflo fan unit that provides continuous air flow to the screen. The fan unit is used in combination with particle and gas filters for protection against specific organic, inorganic and acid gases. The filters are changed as needed. Particle filter indicator shows how much filter capacity you have left. The batteries can be charged either on site in the fan unit or separately.
H847720: Face shield with hard head top.
H857720: Face shield with integrated protective helmet.

Face shield with built-in battery-powered fan unit. For protection against particles. Comes complete with polycarbonate visor, fabric face seal, main filter and pre-filter, 2 replaceable visor covers, 6 hour head battery, battery charger, cotton head cover, airflow test disc and fabric storage bag.

Face shield designed and developed based on market requirements and needs. Adapted for use together with fan unit SR 500, SR 500 EX or SR 700. It can also be used together with compressed air attachment SR 507. Robust screen with fold-up visor that gives the user comfortable and safe breathing and eye protection. Protects the breathing zone and the head. Impact- and scratch-resistant PC sight glass. Adjustable head position. Air deflector for optimal comfort. Supplied air keeps the visor fog-free. Replaceable flexible breathing tube. Standard attachment for earmuffs. Exchangeable protective foils are available as accessories. PC visor and visor frame withstand high speed particles 120 m/s at extreme temperatures, liquid splash and molten metal splash. Equipped with exhalation valve. Made of materials that allow use in harsh environments.
Contents: Face shield, breathing tube, protective film with clips, cleaning cloth and user manual.
Use temperature: -10°C - +55°C
Assigned protection factor: 100 (3A, 3B), 200 (TH3)
Nominal protection factor: 200 (3A, 3B), 500 (TH3)
Weight: 860 g

Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 14594:2005
EN 166

Battery charger for fan units SR 500 / SR 700.

Suitable Jupiter fan.
Combination filter - against organic gases/vapours and particles.

Filter adapter used for connecting Sundström filters to respirators with standard thread according to EN 148-1.

Filter holder which, together with the 3M gas/steam filter, provides a combination filter. Sold in pairs.
NOTE! only if particle filters are required on gas/steam filters, filter holder 501 should be used

Refill package with filter combination A2P3 R that protects against organic vapors, with a boiling point higher than 65°C and particles.
Contents: 2 pairs of gas filters, 4 pairs of particle filters and 1 pair of filter holders.

Maintenance-free mask against dust and other particles. It is light, hygienic and provides effective and comfortable protection. At the same time, it has a low breathing resistance. The masks have elastic headbands and aluminum nosebands. The nose bridge, with foam cushion over the bridge of the nose, provides a good and comfortable fit for most face shapes. The mask 8810 is cup-shaped.
Complies with EN 149:2001.

Maintenance-free filtering half mask against dust and other particles. Three-panel folding design with tabs for easy opening and placement. Soft nose foam material and inner protection. Built-in aluminum nose bridge for personal adjustment. With Cool Flow comfort valve that releases very warm air to reduce heat build-up and the risk of fogging on the glasses. Advanced Electret Filter Media (AEM) provides low initial breathing resistance. Does not contain natural rubber latex or PVC. Compatible with eye protection from 3M. Separately packed. Color coded for easy identification.
Conforms to EN 149:2001 and A1:2009.

Filtering half mask for welding fumes, with valve. Effective particle filter provides an FFP2-rated (NPF 12) protection against dust, fog and metal fumes. Layers of activated carbon filter out ozone gas generated during MIG, TIG and ARC welding. Specially treated outer shell provides improved flame resistance to minimize the impact of hot weld spatter. Cool Flow valve provides comfortable protection even in hot and humid conditions. Soft inner sealing ring provides increased comfort, which can be cleaned so the cover can be used multiple times. Cup-shaped design that keeps its shape and adapts well to the shape and size of the face. Adjustable braided headband that provides high comfort to the face, head and neck. Low profile design for use with welding shields and welding helmets. Rated for multiple use.

Maintenance-free mask with exhalation valve against dust and other particles. 3-field construction. It is light, hygienic and provides effective and comfortable protection. The mask can be folded and has an extra soft inner part that feels pleasant against the skin. The material of the nose pad is sweat absorbent. The headbands have constant elasticity and can be adjusted to most head sizes. The CPC exhalation valve facilitates exhalation and it reduces the build-up of heat, moisture and carbon dioxide in the mask. All the masks in the 9300 series are individually packed, for hygienic storage.
Conforms to EN 149:2001

Maintenance-free filtering half mask against dust and other particles. Three-panel folding design with tabs for easy opening and placement. Soft nose foam material and inner protection. Built-in aluminum nose bridge for personal adjustment. With Cool Flow comfort valve that releases very warm air to reduce heat build-up and the risk of fogging on the glasses. Advanced Electret Filter Media (AEM) provides low initial breathing resistance. Does not contain natural rubber latex or PVC. Compatible with eye protection from 3M. Separately packed. Color coded for easy identification.
Conforms to EN 149:2001 and A1:2009.

Cup-shaped filtering half-mask with exhalation valve. With soft seal against the face for comfortable use. M-shaped nose bridge. Color-coded cotton bands. Protects against dust, metal fumes, solid and liquid particles in concentrations up to 50 x the hygienic limit value.
Complies with EN 149:2001+A1:2009.

Filtering FFP3 half mask with exhalation valve. Equipped with Ventex-Ventil with extra large opening that reduces heat and moisture and eliminates fogging under glasses. Made of DuraMesh material, strong and durable structure that allows the mask to retain its shape. Comfortable nose pad and an adjustable strap with locking clip that is easy and safe to put on and take off. Protects against solid and liquid particles up to 50 X HGV.
Complies with EN149:2001+A1:2009

Escape hood with filter for evacuation in case of chemical accidents. Filtering respirator in combination with hood for use during evacuation in case of chemical accidents. The hood is based on Sundström's silicone half mask, which is mounted in a hood made of chemical-resistant material. The hood is vacuum packed in an aluminum bag. The hood can be quickly and easily put on without prior adjustment. Equipped with combination filter SR 299-2 ABEK1-Hg-P3. The filter combination protects against all types of particles and the following types of gases: A1, organic gases and vapors, e.g. solvents, whose boiling point exceeds +65°C. B1, inorganic gases and vapors eg chlorine, hydrogen sulphide and hydrogen cyanide. E1, acid gases and vapors, eg sulfur dioxide and hydrogen fluoride. K1, ammonia and certain amines, eg ethylenediamine. Hg, mercury vapor. Lifespan 10 years. Approved as a portable escape hood and delivered in a flexible nylon emergency bag, which can be attached to the belt, for example.
Usage temperature: -20°C - +55°C 
Nominal protection factor: 50 
Weight: 680 g 

Approved/Certified according to: 
EN 403:2004 
EN 14387:2004 + A1:2008

Escape hood with filter for evacuation in case of chemical accidents. Filtering respirator in combination with hood for use during evacuation in case of chemical accidents. The hood is based on Sundström's silicone half mask, which is mounted in a hood made of chemical-resistant material. The hood is vacuum packed in an aluminum bag. The hood can be quickly and easily put on without prior adjustment. Equipped with combination filter SR 299-2 ABEK1-Hg-P3. The filter combination protects against all types of particles and the following types of gases: A1, organic gases and vapors, e.g. solvents, whose boiling point exceeds +65°C. B1, inorganic gases and vapors eg chlorine, hydrogen sulphide and hydrogen cyanide. E1, acid gases and vapors, eg sulfur dioxide and hydrogen fluoride. K1, ammonia and certain amines, eg ethylenediamine. Hg, mercury vapor. Lifespan 10 years. Approved for stationary storage only. 
Operation temperature: -20°C - +55°C 
Nominal protection factor: 50 
Weight: 680 g 

Approved/Certified according to: 
EN 403:2004 
EN 14387:2004 + A1:2008

Escape hood with filter for evacuation in case of fire and/or chemical accidents. Filtering respirator in combination with a hood for use during evacuation during fire and in case of chemical accidents. The hood is based on Sundström's silicone half mask, which is mounted in a hood made of flame-resistant and chemical-resistant material. The hoods are vacuum packed in an aluminum bag. The hood can be quickly and easily put on without prior adjustment. Equipped with gas filter SR 331-2 ABEK1-CO and particle filter SR 510 P3. The filter combination protects against carbon monoxide and other toxic gases and particles that can form in the event of a fire and also against the following types of gases: A1, organic gases and vapors, e.g. solvents, whose boiling point exceeds +65°C. B1, inorganic gases and vapors, eg chlorine, hydrogen sulphide and hydrogen cyanide. E1, acid gases and vapors, eg sulfur dioxide and hydrogen fluoride. K1, ammonia and certain amines, eg ethylenediamine. Lifespan 10 years. Approved as a portable escape hood and delivered in a flexible nylon emergency bag, which can be attached to the belt, for example.
Usage temperature: -20°C - +55°C
Nominal protection factor: 50
Weight: 700 g < br>
Approved/Certified according to:
EN 403:2004
EN 14387:2004 + A1:2008

Escape hood with filter for evacuation in case of fire and/or chemical accidents. Filtering respirator in combination with a hood for use during evacuation during fire and in case of chemical accidents. The hood is based on Sundström's silicone half mask, which is mounted in a hood made of flame-resistant and chemical-resistant material. The hoods are vacuum packed in an aluminum bag. The hood can be quickly and easily put on without prior adjustment. Equipped with gas filter SR 331-2 ABEK1-CO and particle filter SR 510 P3. The filter combination protects against carbon monoxide and other toxic gases and particles that can form in the event of a fire and also against the following types of gases: A1, organic gases and vapors, e.g. solvents, whose boiling point exceeds +65°C. B1, inorganic gases and vapors, eg chlorine, hydrogen sulphide and hydrogen cyanide. E1, acid gases and vapors, eg sulfur dioxide and hydrogen fluoride. K1, ammonia and certain amines, eg ethylenediamine. Lifespan 10 years. Approved for stationary storage only. 
Operation temperature: -20°C - +55°C 
Nominal protection factor: 50 
Weight: 700 g 

Approved/Certified according to: 
EN 403:2004 
EN 14387:2004 + A1:2008

Battery-powered fan unit that protects against solid particles. With 2 flow rates, 185 l/min and 205 l/min. Easy-to-use, versatile respirator for environments that require particle filtration. Easy to adjust and maintain. Highly efficient filter that captures dangerous dust, mist and smoke and can be used for troublesome gases and vapours. Li-Ion battery with charging indicator. Slim design and low weight make it excellent for use in tight spaces. The polluting air is drawn in through a filter and purified. The air is then brought through a breathing tube up to the top of the head. Acoustic and visual alarm for low air flow or low battery level. A window on the fan provides quick identification of which filter is being used. IP53.
Conforms to SS-EN12941
Contents:
Starter package TR-315E+: Fan unit TR-302E+, particle filter, pre-filter, standard belt, flow indicator, high capacity battery, battery charger incl. charging plate and self-adjusting breathing air hose.
Fan unit TR-302E+: Fan unit with filter cap and air flow indicator.

Battery-powered fan unit that protects against particles, gases or vapors, or against a combination of these depending on the type of filter used. Low-profile construction means that the center of gravity is kept close to the back which provides high comfort. Fan with selectable 3-stage solution for the air flow. Easily adjusted with a button with two-step function. The air flow is set between 190-205 l/min. Easy to clean. Acoustic and visual alarm for low air flow or low battery level. Many filter combinations, in front of the filter both pre-filter and spark arrester can be mounted. In normal use the fan is IP53 sealed, with cleaning plugs fitted the enclosure protection is IP67.
Conforms to Cat III, EN12941
Contents:
Starter Kit TR-619E: Fan unit TR-602E, A2P filter, filter cover, 10 pcs pre-filter, 2 pcs spark arrester, Easy Clean belt, high capacity battery, battery charger with one station, airflow indicator and self-adjusting breathing air hose.
Fan unit TR-602E: Fan unit, 2 spark arrestors, and airflow indicator.

Fresh air unit used together with Esab's welding helmets. Robust construction makes it suitable for all heavy duty welding applications. Provides proper protection against welding fumes and dust when welding, chiseling and grinding. Adjustable airflow from 170 l/min to 220 l/min to suit the environment and application. The airflow is indicated by the LED at the top of the unit. Audible and visual alarms for clogged filter and low battery level, giving the welder extra safety. Powerful Li-Ion battery pack that provides up to 8 h of use at air flow 220 l/min. Easy filter change.
Standard equipment: Fan unit, battery, intelligent charger, P3 filter, pre-filter, waist belt, air hose and Proban hose cover.
Dimensions (LxWxH):< /b> 185x100x160 mm.
Weight: 1000 g.
Tested and certified according to CE-EN12941 to be used together with < b>welding helmets Sentinel A50 (TH2), Warrior Tech (TH3), G50 (TH3), G40 (TH3), G30 (TH3) and F20 (TH2).

Pre-filter for the fan unit Jupiter's filter. These are placed under the protective cover. P denotes the particle filter type. SL means that the particle filter is approved for use against both solid and non-volatile liquid particles. (S=solid, L=liquid).

Storage box made of impact-resistant plastic with tight-fitting lid. Intended for half mask with combination filter. Protects mask and filter from ambient contamination and increases service life. Equipped with both a carrying strap and holder for attachment to the belt.

Storage box made of impact-resistant plastic with tight-fitting lid. Intended for stationary storage of larger respiratory protection products, e.g. full mask SR 200 with filter and accessories. Protects mask and filter from ambient contamination and increases service life. Transparent lid that is held in place with the help of two clamps.

Storage bag for full mask with adjustable shoulder strap and plastic pocket for labeling.

Soft storage bag with a lid that closes with velcro. Intended for half mask with a filter. Can be attached to the belt. Volume 2.5 liters.

Gas and vapor filter for 3M full and half masks.
6051 - Against organic vapors from substances with a boiling point above 65°C.
6051i - Against organic vapors from substances with a boiling point above 65°C. With filter indicator.
6054 - Against ammonia and amines.
6055 - Against organic vapors from substances with a boiling point above 65°C.
6055i - Against organic vapors from substances with a boiling point above 65°C. With filter indicator.
6057 - Against organic vapors with a boiling point above 65°C as well as inorganic and acid gases.
6059 - Against organic vapors with a boiling point above 65° C as well as inorganic and acid gases and ammonia.
6075 - Against organic vapors from substances with a boiling point above 65°C / Formaldehyde.
Conforms to EN 143:2000 (6035) EN 141:2000 (6051, 6054, 6055, 6057, 6059, 6075)

Gas, vapor and particle filters for 3M full and half masks. 
6092 (for full and half masks) - Against organic vapors with a boiling point above 65°C, inorganic vapors, acid gases , ammonia and its derivatives, formaldehyde up to 10 ppm and particles. 
6096 (for full and half mask) - Against vapors and particles of metallic mercury, chlorine and solid and liquid particles.  
6098 (for full mask) - Against organic vapors from low-boiling substances with a boiling point of 65°C or below as well as solid and liquid particles. 
6099 (for full mask ) - Against organic vapors from substances with a boiling point above 65°C, inorganic gases, acid gases and ammonia as well as solid and liquid particles. 
Complies with EN 141:2000 (6092, 6096, 6099) EN 371:1992 (6098)

Effective and comfortable maintenance-free half mask that provides protection against organic vapors and harmful particles. Centrally located exhalation valve helps reduce breathing resistance and prevents heat and moisture build-up in hot and humid conditions. Lightweight and well-balanced design with a low profile. Integrated filters make the mask ready for use and maintenance-free. Soft face seal with good fit, made of embossed, hypoallergenic materials. Adjustable head position and easy-to-attach neckband.
With filter class FFA2P3 RD that protects against organic vapours, with a boiling point higher than 65°C, up to 10x Hgv (Hygienic limit value) or 5000 ppm (depending on which is lower), and 20x Hgv for particles.
Supplied with resealable bag for hygienic storage.
Complies with EN 405:2001+A1:2009

Effective and comfortable maintenance-free half mask that provides protection against organic vapors, inorganic vapors, acid gases, ammonia and harmful particles. Centrally located exhalation valve helps reduce breathing resistance and prevents heat and moisture build-up in hot and humid conditions. Lightweight and well-balanced design with a low profile. Integrated filters make the mask ready for use and maintenance-free. Soft face seal with good fit, made of embossed, hypoallergenic materials. Adjustable head position and easy-to-attach neckband.
With filters in filter class FFABEK1P3 RD that protect against organic vapors, with a boiling point higher than 65°C, inorganic vapors and acid gases and ammonia up to 10x Hgv (Hygienic limit value) or 1000 ppm (whichever is lower), and 50x Hgv for particulates.
Supplied with resealable bag for hygienic storage.
Complies with EN 405:2001+A1:2009

Half mask made of thermoplastic elastomer. Easy to use, lightweight, low maintenance and available in 3 sizes which are color coded in different shades of grey. Designed for dual filters that provide even weight distribution and the best possible field of view. Mask with bayonet mount and used with replaceable twin filters against gases/vapours and/or particles. Equipped with an exhalation valve that facilitates exhalation and reduces the build-up of carbon dioxide, heat and moisture in the mask.
Filter not included.
Conforms to EN 140:1998

Half mask that offers comfort, durability and stability with a firm, lightly structured silicone face seal and a robust frame. Designed for heavy industry where there is a need for robust personal protective equipment, e.g. construction industry, mining industry, metal industry, shipbuilding industry and work with repair and maintenance. Adjustable strap stand. Overmolded with low profile. Bayonet mount. Smartly designed valve cover. Cool Flow exhalation valve. Quick Latch Drop Down function that makes the mask easy to put on and take off when exiting contaminated areas. Helmet and visor do not need to be removed when putting on and taking off the half mask.
Filter not included.
Conforms to EN 140:1998

Half mask with a balanced and secure fit. Made of soft silicone material for comfort and durability. Reduced pressure and fewer stress points. Fold-down function for a comfortable position when taking a break. Compatible with head and eye protection from 3M. Cool Flow exhalation valve provides a lower breathing resistance. Reduced accumulation of heat and sweat. Does not distort the voice when speaking. Downward flow of the exhaled air gives less risk of fogging on the eye protection/visor. Double filters that provide lower breathing resistance. Connection of S-200 for air supply as an option.
Filter not included.
Conforms to EN 140:1998

Reusable half mask with replaceable filters. Effectively protects against particles, gases and vapours. Made of soft silicone, sits comfortably against the face and the low breathing resistance increases comfort. The placement of the filters means you get a good weight distribution and a good field of vision.
Supplied with filters in filter class A2P3 R that protect against organic vapors, with a boiling point higher than 65°C and particles.
Contents: 1 mask frame, 1 pair of gas/steam filters, 2 pairs of P3 particle filters and 1 pair of filter holders.

Reusable respirator with smart and intuitive functions. Protects against particles and a wide range of gases and vapors when combined with 3M Secure Click filters. High breathability thanks to two double-flow filters in each respirator, creating four paths for airflow. The HF-800 series respirator and associated filter have an inhalation resistance of less than 5 mbar, measured at continuous 95 l/min. Equipped with speech membrane designed to facilitate communication during work. Rear-facing filter design for added compatibility with welding and grinding visors. Exhalation valve that directs the exhaled air and moisture downwards. Unique filter attachment, place the attachments against each other and press until you hear a click. Seal control with push button, quickly check that the respirator closes tightly. Patented flexible silicone face seal that provides high comfort and a soft feel against the face. Easily adjusted buckle, pull straps to tighten, squeeze wings to loosen.
Filter not included, order separately.

Full face mask made of silicone that is easy to use and has a low weight. Equipped with i.a. a large polycarbonate visor, exhalation valve and speech membrane. Special glasses holder can be fitted. The mask has bayonet mounts and can be used partly with twin filters, partly with the 3M S-200 compressed air system or in the dual function with both filters and the S-200 system. Scratch-resistant polycarbonate visor where extra protective film is available. (6885 protective film).
Conforms to EN 136.

Practical charging rack for charging 1-5 batteries for fan unit SR 500 and SR 500 EX. Made of ABS plastic. Charger not included. 
Dimensions (WxDxH): 390x328x105 mm.

Leather belt for fans SR 500 and SR 700. Metal buckle.

Complete waist-worn filter holder with leather belt and double hose that connects to half mask SR 900. Supplied with hose guard and spark guard.

CEJN-koppling 342 till Vortemp-, Vortex- och Flowstream-regulator med 1/4 hane utvändigt.

Particulate filter for use alone on the full or half masks in the 3M 6000, 7000 and 7500 series, or in combination with the most common gas/vapor filters. Fastens with a simple bayonet mount.
2125, 2135 - Against solid and liquid particles.
2128, 2138 - Against solid and liquid particles. Against ozone up to 10 x Hgv. Against organic vapors/acidic gases in concentrations below Hgv. 
5925, 5935 - Against solid and liquid particles in combination with gas/vapor filters.
6035 - Against solid and liquid particles. For very dusty areas. Low breathing resistance and 50% larger filter surface than traditional filters. The filter cap protects against sparks and liquid splashes and is at the same time an effective coarse dust filter. 
6038 - Against solid and liquid particles. For very dusty areas. Low breathing resistance and 50% larger filter surface than traditional filters. The filter cover protects against sparks and liquid splashes and is also an effective coarse dust filter.
501 - Filter holder for 5925 and 5935 particle filters in combination with 6000 gas/vapor filter.
Conforms to EN 143.

With belt, 1/4 BSP female thread. Delivered without coupling.

Alcohol-free cleaning wipes that easily remove, among other things, grease and sweat from personal protective equipment. Perfectly suited for earmuffs, helmets, full and half masks.

Cleaning wipes for daily cleaning of Sundström respirators.

Carrying harness for fan unit SR 500 and SR 700. The harness gives the user a number of possibilities to carry the fan with the greatest possible comfort during different types of work. The fan can be worn at the back or between the shoulder blades. The back plate can be adjusted in 3 positions according to the height of the user. Made of polyester and TPE.

Protective foil for Sundström's face shield SR 540. 12-pack.

Complete protective helmet SR 580 with welding visor SR 584 which, together with the battery-powered fan SR 500 or SR 700 and approved filters, are part of Sundström's fan-assisted breathing protection system. Can also be used together with compressed air additive SR 507, this combination constitutes a breathing apparatus with continuous air flow for connection to compressed air. The combinations protect against harmful gases/particles, radiation and splashes during welding, cutting, grinding and similar work. The design makes them useful for work in narrow and hard-to-reach spaces. The equipment can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. Protective helmet with flip-up visor. Protects the breathing zone and the head. Adjustable head position. Replaceable flexible breathing hose that connects to the filter-equipped fan. Equipped with exhalation valve. Standard attachment for earmuffs. The positive pressure in the helmet's visor prevents particles and other contaminants from entering the breathing zone. The flip-up welding visor is delivered mounted on the helmet, with EN 10 welding glass and polycarbonate protective glass (dimensions 90x110 mm). Accessories in the form of automatic welding glasses, correction glasses, neck and chest protection and hose protection are available.
Contents: Safety helmet SR 580, breathing hose, welding visor SR 584 with degree of darkness EN 10, cleaning napkin SR 5226 and instructions for use.< BR>Usage temperature: -10°C - +55°C
Assigned protection factor: 100 (3A, 3B), 200 (TH3)
Nominal protection factor: 200 (3A, 3B), 500 (TH3)
Darkness level: EN 10
Weight: 1390 g
< BR>Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 14594:2005
EN 397
EN 175:1997
EN 166

(HTML text not available)

Soft hood with integrated headband, used together with battery-powered fan units or compressed air systems from 3M. In addition to breathing protection, the hood protects the head and face and provides eye and face protection according to SS-EN166 against liquid splashes and particles with low impact energy. Made of laminated polypropylene. Polyester visor.
Conforms to SS-EN12941 TH3 (with 3M Jupiter™). SS-EN14594 3A (with 3M Flowstream™, Vortemp, Vortex regulators, Versaflo TR-300 and Versaflo TR-600).

Soft hood with integrated headband, used together with battery-powered fan units or compressed air systems from 3M. In addition to breathing protection, the hood protects the head, face, neck and shoulders and provides eye and face protection according to SS-EN166 against liquid splashes and particles with low impact energy. Made of surface-treated polypropylene, which is a softer, quieter and more durable fabric. Visor in polyester.
Conforms to SS-EN12941 TH3 (with 3M Jupiter). SS-EN14594 3A (with 3M Versaflo TR-300, Flowstream, Vortemp and Vortex regulators).

Protective hood intended to be used together with battery-powered fan unit SR 500, SR 500 EX or SR 700 in Sundström's fan-assisted breathing protection system. The hood's breathing hose is connected to the filter-equipped fan. The positive pressure created in the hood prevents particles and other contaminants from entering the hood. The hood can also be used together with compressed air additive SR 507. This combination constitutes a breathing apparatus with continuous flow for connection to compressed air. The equipment can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. Protects the respiratory system and the head. Impact-resistant and chemical-resistant visor. Supplied air keeps the visor fog-free. Adjustable head position. Fixed, flexible breathing hose. Equipped with an exhalation valve.
Contents: Hood with breathing hose, cleaning tissue and instructions for use.
Using temperature: -10°C - +55°C
Assigned protection factor: 100 (3A, 3B), 200 (TH3)
Nominal protection factor: 200 (3A, 3B), 500 (TH3)
Weight : 360 g

Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 14594:2005

Protective hood intended to be used together with battery-powered fan unit SR 500, SR 500 EX or SR 700 in Sundström's fan-assisted breathing protection system. The hood's breathing hose is connected to the filter-equipped fan. The positive pressure created in the hood prevents particles and other contaminants from entering the hood. The hood can also be used together with compressed air additive SR 507. This combination constitutes a breathing apparatus with continuous flow for connection to compressed air. The equipment can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. Protects the respiratory system and the head. Impact-resistant and chemical-resistant visor. Supplied air keeps the visor fog-free. Adjustable head position. Fixed, flexible breathing hose. Equipped with exhalation valve. Also protects the head and shoulders, has adjustable neck width and adjustable distance to the face.
Contents: Hood with breathing tube, cleaning cloth and instructions for use.
Use temperature: -10° C - +55°C
Assigned protection factor: 100 (3A, 3B), 200 (TH3)
Nominal protection factor: 200 (3A, 3B), 500 (TH3)
Weight: 480 g

Approved/Certified according to:
EN 12941:1998 + A2:2008
EN 14594:2005

Protective hood intended to be used together with battery-powered fan unit SR 500, SR 500 EX or SR 700 in Sundström's fan-assisted respiratory protection system. The hood's breathing hose is connected to the filter-equipped fan. The positive pressure created in the hood prevents particles and other contaminants from entering the hood. The hood can also be used together with compressed air additive SR 507. This combination constitutes a breathing apparatus with continuous flow for connection to compressed air. The equipment can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. Protects the respiratory system, head and shoulders. Exchangeable hood in Tyvec. Sight glass in PETG plastic. Supplied air keeps the visor fog-free. Adjustable head position. Adjustable neck width. Flexible breathing hose. 
Contents: Hood with breathing hose, cleaning tissue and instructions for use. 
Use temperature: -10°C - +55°C < br>Assigned protection factor: 100 (3A, 3B), 200 (TH3) 
Nominal protection factor: 200 (3A, 3B), 500 (TH3)  ;
Weight: 450 g 

Approved/Certified according to: 
EN 12941:1998 + A2:2008 
EN 14594:2005

Protective hood intended to be used together with battery-powered fan unit SR 500, SR 500 EX or SR 700 in Sundström's fan-assisted respiratory protection system. The hood's breathing hose is connected to the filter-equipped fan. The positive pressure created in the hood prevents particles and other contaminants from entering the hood. The hood can also be used together with compressed air additive SR 507. This combination constitutes a breathing apparatus with continuous flow for connection to compressed air. The equipment can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy, hot or long-term work. Protects the respiratory system and the head. Exchangeable hood in Tyvec. Sight glass in PETG plastic. Supplied air keeps the visor fog-free. Adjustable head position. Adjustable face seal. Flexible breathing hose. Equipped with an exhalation valve. 
Contents: Hood with breathing hose, cleaning tissue and instructions for use. 
Use temperature: -10°C - +55°C 
Assigned protection factor: 100 (3A, 3B), 200 (TH3) 
Nominal protection factor: 200 (3A, 3B), 500 (TH3)  
Weight: 420 g 

Approved/Certified according to: 
EN 12941:1998 + A2:2008 < EN 14594:2005

Protective hood intended for use together with Sundström half masks and full masks with filter or compressed air additive SR 307 and with SR 90 Airline. Protects against dust and particles as well as small amounts of splashes and drops. Made of Tyvek material and can be used in any situation where a half mask can be used. However, does not protect against toxic, corrosive or irritating vapors or aerosols. The hood is intended for short-term use and is not suitable for cleaning.
Use temperature: -10°C - +55°C
Weight: 28 g

Sweatband for face shield SR 570.

Compressed air belt Airvisor. Complete with carbon filter and air flow regulator and quick couplings. For use with Airvisor and Airvisor MV.

Compressed air filter that cleans ordinary compressed air to breathable quality. The unit consists of regulator, pre-separator and main filter (SR 292) which are mounted in a covering sheet metal frame. Placed on the floor or hung on the wall. The pre-separator, which has automatic drainage, separates coarse particles, water and oil. Main filter SR 292 consists of a carbon filter part (approx. 500 g) surrounded by two particle filters P3. The air is cleaned here of any remaining particles/gases/vapours/odors. Used together with Sundström's compressed air-fed respirator.
Use temperature: -10°C - +55°C
Inlet: R1/2"
Input pressure: 6-10 bar
Outputs: 1 pc (safety coupling), 1 pc plugged
Max air flow: 900 l/min (three user)
Filter surface P3: 2200 cm²
Active carbon: 500 g
Adsorption capacity: 100-150 g oil

Durable compressed air-fed hood with large impact-resistant visor. Breathing apparatus with continuous air flow for connection to compressed air. The hood is especially intended for heavy and long-term work in environments where the pollutants have poor warning properties or are particularly toxic. The hood is made of chemical-resistant material and has an adjustable head position. Material that is not capable of sparking upon friction, which enables use in explosive/flammable environments. Replaceable polycarbonate sight plate that can be fitted with a protective foil. The control valve is equipped with a warning whistle that gives a signal if the amount of air falls below the recommended amount. The compressed air should be cleaned with a compressed air filter type Sundströms SR 99-1.
Contents: Hood with breathing hose, control valve, belt, flow meter, protective film and user manual.
Working pressure: 4-7 bar
Air flow: 150-240 l/min
Usage temperature: -10°C - +55°C
Assigned protection factor: 100 (3A, 3B)
Nominal protection factor: 200 (3A, 3B)
Weight: 770 g (without control valve)

Approved/Certified according to:
EN 14594:2005
EN 140:1998

Compressed air hose for Sundström's compressed air-fed breathing masks. Delivered assembled with safety coupling and nipple.

Compressed air-fed full mask with excellent fit, high protective effect and very good breathing comfort for the toughest areas of use. Polycarbonate visor. With filter back-up intended to be connected to a suitable compressed air source with breathable air. The overpressure that then occurs in the mask prevents the surrounding polluted air from reaching the user. The breathing tube can also be removed from the mask and it can then be used as a clean filter cover. Can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy or long-term work and when the contaminants have poor warning properties or are particularly toxic. Made of materials that do not cause sparks during friction, which enables use in explosive/flammable environments. The control valve is equipped with a warning whistle that gives a signal if the amount of air falls below the recommended amount. The compressed air should be cleaned with a compressed air filter type Sundströms SR 99-1.
Contents: Full face mask with breathing hose and polycarbonate visor, control valve, belt, screw cap, cover cap, pre-filter holder, flow meter, filter adapter and user manual.< BR> Working pressure: 5-7 bar
Air flow: 150-320 l/min
Operating temperature: -10°C - +55°C
Assigned protection factor: 1000 (4A, 4B)
Nominal protection factor: 2000 (4A, 4B)
Weight: 750 g (without control valve)

Approved/Certified according to:
EN 14594:2005

Compressed air-fed half mask with filter back-up and excellent fit, high protective effect and very good breathing comfort for the toughest areas of use. Intended to be connected to a suitable compressed air source with breathable air. The overpressure that then occurs in the mask prevents the surrounding polluted air from reaching the user. Can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy or long-term work and when the contaminants have poor warning properties or are particularly toxic. Made of non-sparking friction material, enabling use in explosive/flammable environments. The control valve is equipped with a warning whistle that gives a signal if the amount of air falls below the recommended amount. Flow meter for checking the air flow is included. The compressed air should be cleaned with a compressed air filter type Sundströms SR 99-1.
Contents: Mask with breathing hose, control valve mounted on waist belt, cover, pre-filter holder, flow meter and user manual.
Working pressure: 4-7 bar
Air flow: 150-320 l/min
Usage temperature: -10°C - +55°C
Assigned protection factor: 30 (3A)
Nominal protection factor: 200 (3A, 3B)
Weight: 280 g (without control valve )

Approved/Certified according to:
EN 14594:2005
EN 140:1998

Compressed air additive for compressed air feeding of Sundström full or half masks. The combination is connected to a suitable compressed air source with breathable air. The overpressure that then occurs in the mask prevents the surrounding polluted air from reaching the user. Can be used as an alternative to filter protection in all situations where such is recommended. This applies in particular to heavy or long-term work and when the contaminants have poor warning properties or are particularly toxic. Made of materials that do not cause sparks during friction, which enables use in explosive/flammable environments. The control valve is equipped with a warning whistle that gives a signal if the amount of air falls below the recommended amount. The compressed air should be cleaned with a compressed air filter type Sundströms SR 99-1.
Contents: Connection box with hose, control valve, belt, locking ring, flow meter and user manual.
Working pressure: 4-7 bar
Air flow: 150-320 l/min
Operating temperature: -10°C - +55°C
Assigned protection factor: 30 (3A) with half mask, 1000 (4A, 4B) with full mask
Nominal protection factor: 200 (3A, 3B) with half mask, 2000 (4A, 4B) with full mask
Weight: 80 g (without control valve)

Approved/Certified according to:
EN 14594:2005