Värme, Luftvård

Oscillating table fan with front grille.

Mobile diesel heating fan for efficient drying of construction sites or heating of well-ventilated spaces. Stainless steel combustion chamber. With flame sensor, overheating protection and regulation equipment. Equipped with a chimney to be able to lead the exhaust gases away and out. Electrical connection 230 V. Supplied with 1.6 m connection cable. Protection class IPX4.
NOTE! Ensure good ventilation before use.

Mobile diesel heating fan for efficient drying of construction sites or heating of well-ventilated spaces. Stainless steel combustion chamber. With flame sensor, overheating protection and regulation equipment. Equipped with a chimney to be able to lead the exhaust gases away and out. Electrical connection 230 V. Supplied with 1.6 m connection cable. Protection class IPX4.
NOTE! Ensure good ventilation before use.

Mobile diesel heating fan for efficient drying of construction sites or heating of well-ventilated spaces. Stainless steel combustion chamber. With flame sensor, overheating protection and regulation equipment. Equipped with a chimney to be able to lead the exhaust gases away and out. Electrical connection 230 V. Supplied with 1.6 m connection cable. Protection class IPX4.
NOTE! Ensure good ventilation before use.

Pre-filter/coarse filter is changed every day. Hepa filters are changed 1-2 times a year. Hepa filters have a separation rate of 99.95%, hepa filters are also called micro filters or absolute filters.

Frost guard for use in dry and damp areas, e.g. pump houses, water meters, garages, storage rooms, caravans, boats, greenhouses and food cellars. Modular house made of white lacquered sheet steel with integrated wall brackets. Equipped with a bimetal thermostat, this means that you can try to find the optimal position adapted to the space you wish to heat. When the thermostat is set to the desired position, for example 1 or 2 etc, it works according to the desired setting, ± 2°C depending on the ambient temperature. Use a thermometer to check that the room is at the correct temperature. Supplied with 1 m cable with grounded plug.
Voltage: 230 V-50 Hz.
Power: 200 W.
Control range: +5°C to +35°C.
Protection class: IP21.
Dimensions (HxWxD): 365x120x75 mm.

Portable gas heater with electronic ignition. Powered by propane gas and equipped with overheating protection and tipping protection. Nozzle with strong oxygen supply makes combustion complete. Suitable for construction sites, workshop/farm buildings, sporting events, barns and factories. Supplied with hose and adapter.

Portable gas heater with electronic ignition. Powered by propane gas and equipped with overheating protection and tipping protection. Nozzle with strong oxygen supply makes combustion complete. Suitable for construction sites, workshop/farm buildings, sporting events, barns and factories. Supplied with hose and adapter.

Portable gas heater with electronic ignition. Powered by propane gas and equipped with overheating protection and tipping protection. Nozzle with strong oxygen supply makes combustion complete. Suitable for construction sites, workshop/farm buildings, sporting events, barns and factories. Supplied with hose and adapter.

Oscillating. Adjustable height 140-165 cm.

Convector element for extra heating indoors. Equipped with stepless thermostat, overheating protection and carrying handles on the sides. Three power modes 750 W / 1250 W / 2000 W. 230 V. Max capacity 20 m². Weight 3.7 kg.

Convector element 230 V with thermostat and three power settings, 750/1250/2000 W. 1.5 m connection cable. Silent fan motor. Equipped with overheating protection. White. For indoor use. Protection class IP20.
Dimensions (WxHxD): 533x390x200 mm

Interior heater with low noise level. 360° swivel mount with bayonet connection. Floor stand, wall bracket and Quick clip included. On/Off button + effect. Can be mounted upside down. Temperature controlled output (PTC) 1100/1700W at -25°C. Automatic overheating protection (resettable). Standard 230V plug.
Nom. power: 1100/1700 W
Voltage: 230 V
Weight: 0.9 kg
Contact version ID: Schuko

Flexibel, kraftfull och hållbar byggluftrenare. Luftrenaren transporterar hela 2020 m3/h vid öppet inlopp. Som standard medföljer ett HEPA-filter (H13), aktivt kolfilter som reducerar lukt och binder kemikalier, förbränningspartiklar m.m. samt ett högklassigt förfilter (G4). Många hyllar flexibiliteten med Faither, luftrenaren kan staplas på två ledder (för dubbel effekt, enkel transport och liten förvaringsplats).

Air purifier that provides clean air at the workplace, in dust class H. Usable on the construction site and in the workshop, for work where it is difficult or impossible to use extraction, for demolition and renovation, etc. Small and light in compact Systainer format with carrying handle, allows it is perfectly suited for mobile use. Filters out harmful dust that hangs in the air despite the use of vacuum cleaners. Effective two-stage filter system that cleans the air thoroughly. Even the smallest dust particles and other harmful substances are filtered out. Dust class H, too much health-hazardous dust in dust class H with limit values ??= 0.1 mg/m³, filtration rate > 99.995%. Filters strongly disease- and cancer-causing dust in the air. Pre-filter protects the main filter by filtering out most of the dust. Main filter in TripleV form with extra large filter surface that does not clog as quickly and lasts longer. Air circulation of up to 440 m³/h, changes the air up to 3 times/h in a 28 m² room. The volume flow can be set in two steps depending on how much dust is generated. The air stream spreads upwards in three directions (left, right, back). Signal light warns of clogged filters and shows when it is time to change the filter. With power outlet, for connecting more SYS-AIR air purifiers or power tools. Up to six air cleaners can be connected in series, thus increasing the ventilation speed and improving air quality. Connection point for supply air hose Ø 200 mm (accessory), for hard-to-reach spaces or dust protection walls. The air purifier can be connected to Systainr and vacuum cleaners with T-LOC or to the SYS-RB trolley for easy transport. Safe storage of the mains cable in the lid. 
Standard equipment: Pre-filter VF-SYS-AIR and main filter HF-SYS-AIR H/HEPA.

Air purifier that provides clean air at the workplace, in dust class M. Usable on the construction site and in the workshop, for work where it is difficult or impossible to use extraction, for demolition and renovation, etc. Small and light in compact Systainer format with carrying handle, allows it is perfectly suited for mobile use. Filters out harmful dust that hangs in the air despite the use of vacuum cleaners. Effective two-stage filter system that cleans the air thoroughly. Even the smallest dust particles and other harmful substances are filtered out. Dust class M, for health-hazardous dust in dust class M with limit values ??> 0.1 mg/m³, filtration rate > 99.9%. Pre-filter protects the main filter by filtering out most of the dust. Main filter in TripleV form with extra large filter surface that does not clog as quickly and lasts longer. Air circulation of up to 680 m³/h, changes the air up to 3 times/h in a 57 m² room. The volume flow can be set in two steps depending on how much dust is generated. The air stream spreads upwards in three directions (left, right, back). Signal light warns of clogged filters and shows when it is time to change the filter. With power outlet, for connecting more SYS-AIR air purifiers or power tools. Up to six air cleaners can be connected in series, thus increasing the ventilation speed and improving air quality. Connection point for supply air hose Ø 200 mm (accessory), for hard-to-reach spaces or dust protection walls. The air purifier can be connected to Systainr and vacuum cleaners with T-LOC or to the SYS-RB trolley for easy transport. Safe storage of the mains cable in the lid.
Standard equipment: Pre-filter VF-SYS-AIR and main filter HF-SYS-AIR M.

Advanced portable air purifier tested and certified to be used both as a standalone air purifier and for evacuation. Robust construction with lightweight casing with rigid aluminum frame. Two-stage filtration with a pleated polyester pre-filter that captures coarser dust particles before the air passes through the individually tested HEPA H13 filter. The HEPA filter is protected by a metal mesh that makes it easy to vacuum without causing damage. The air flow is directed upwards to avoid spreading dust on floor surfaces. Two warning lights indicate if the filters are clogged or leaking. Motor with two speeds. Low noise level. Air outlet Ø 160 mm. Outlet manifold for the round air outlet is available as an option.

Advanced portable air purifier tested and certified to be used both as a standalone air purifier and for evacuation. Robust construction with lightweight casing with rigid aluminum frame and lockable metal wheels. Two-stage filtration with a pleated polyester pre-filter that captures coarser dust particles before the air passes through the individually tested HEPA H13 filter. The HEPA filter is protected by a metal mesh that makes it easy to vacuum without causing damage. Two warning lights indicate if the filters are clogged or leaking. Motor with two speeds. Air outlet Ø 254 mm. Outlet manifold for the round air outlet is available as an option.

Smooth air purifier with high capacity. Built-in connection outlet 160 mm. Equipped with an indicator light that lights up when it's time to clean the filters. Equipped with pre-filter and H13 filter. Suitable for rooms up to 22 m² calculated on a ceiling height of 2.5 m and air circulation of 10 times/h.
Meets the Swedish Work Environment Authority's recommendations for handling quartz dust (according to AFS 2015:2, H13 filters should be used).

Supply air hose that is adapted to be used together with the Festool air cleaner SYS-AIR, for optimal dust collection with a dust protection wall or in hard-to-reach places. Flexible and 6 m long hose (Ø 200 mm) which is easily attached to the air cleaner with the included adapter plate and can thus be integrated into the dust protection wall. It can also be placed directly on the dust source. This reduces the spread of dust in the room exactly where it is needed. Supplied in Systainer SYS3 M 437.

Standing fan heater. IP20. Thermostat with overheating protection. 230 V.
Power: 1000/2000 W and cold air mode.
Cable: 1.8 m with plug.

Heating fan for extra heating of premises. Equipped with stepless thermostat, overheating protection and carrying handle. Two power modes 1000 W / 2000 W. 1-phase, 230 V. Max capacity 20 m². Protection class IP24.

Heating fan for heating premises. With thermostat. Rubber connection cord 1.35 m. Carrying handle. Three power modes, 650 W / 1300 W / 2000 W. 230 V. Protection class IP24.

Heating fan for extra heating of premises. Equipped with stepless thermostat, overheating protection and carrying handle. Three power modes 40 W / 1650 W / 3300 W. 1-phase, 230 V. Max capacity 30 m². Weight 5.9 kg. Protection class IP24.

Heating fan for extra heating of premises. Equipped with stepless thermostat, overheating protection and carrying handle. Three power modes 55 W / 2500 W / 5000 W. 3-phase, 400 V. Max capacity 48 m². Weight 7.2 kg. Protection class IP24.

Robust and reliable fan heater. Equipped with thermal fuse. Made of sheet steel and painted with heat-resistant paint. Strong carrying handle. Three effect stages. Fixed 16A CEE socket. 400 V.
Approved for outdoor use. IP44.
Air flow: 708 m³/h.
Weight: 9.4 kg.

Heating fan for extra heating of premises. Equipped with stepless thermostat, overheating protection and carrying handle. Three power modes 55 W / 4500 W / 9000 W. 3-phase, 400 V. Max capacity 80 m². Weight 10.2 kg. Protection class IP24.

Portable fan heater 230 V, 1-phase. Max power of 2 kW. Built-in thermostat regulates both fan and heat, alternatively only heat. The choice is made with the function selector. The thermostat has a setting range of +5°C to +35°C. Supplied with 1.8 m cable with plug for connection to grounded socket 230 V.
Approved for outdoor use. IP44.
Air flow: 235 m³/h.
Weight: 5.7 kg.

Portable fan heater 400 V, 3-phase. Max power of 5 kW. Built-in thermostat regulates both fan and heat, alternatively only heat. The choice is made with the function selector. The thermostat has a setting range of +5°C to +35°C. Equipped with a 230 V socket on the back. Supplied with 1.8 m connection cable with CEE plug for connection to earthed outlet 400 V.
Approved for outdoor use. IP44.
Airflow: 480 m³/h.
Weight: 6.7 kg.

Portable fan heater 400 V, 3-phase. Max power of 9 kW. Built-in thermostat regulates both fan and heat, alternatively only heat. The choice is made with the function selector. The thermostat has a setting range of +5°C to +35°C. Equipped with a 230 V socket on the back. Supplied with 1.8 m connection cable with CEE plug for connection to earthed outlet 400 V.
Approved for outdoor use. IP44.
Air flow: 720 m³/h.
Weight: 10 kg.

Portabel varmevifte 230 V, 1-fas. Maks effekt på 2 kW. Innebygd termostat regulerer både vifte og varme, alternativt kun varme. Valget gjøres med funksjonsvelgeren. Termostaten har innstillingsområde +5°C til +35°C. Kompakt og robust design i rødlakkert stålplate. Det kraftige rørstativet fungerer som et velbalansert og ergonomisk bærehåndtak. Utformingen beskytter mot slag og vibrasjoner for å kunne brukes i tøffere miljøer. Leveres med 1,8 m kabel med støpsel for tilkobling til jordet stikkontakt 230 V. Godkjent for utendørs bruk. IP44. 
Luftstrøm: 240 m³/t. 
Vekt: 6,0 kg.

Bærbar varmevifte 400 V, 3-fase. Maks effekt på 5 kW. Innebygd termostat regulerer både vifte og varme, alternativt kun varme. Valget gjøres med funksjonsvelgeren. Termostaten har innstillingsområde +5°C til +35°C. Kompakt og robust design i rød lakkert stålplate. Det kraftige rørstativet fungerer som et godt balansert og ergonomisk bærehåndtak. Utformingen beskytter mot slag og vibrasjoner for bruk i tøffere miljøer. Utstyrt med et 230 V uttak på baksiden. Leveres med 1,8 m tilkoblingskabel med CEE-støpsel for tilkobling til jordet uttak 400 V. 
Godkjent for utendørs bruk. IP44. 
Luftstrøm: 480 m³/t. 
Vekt: 6,7 kg.

Bærbar varmevifte 400 V, 3-fase. Maks effekt på 9 kW. Innebygd termostat regulerer både vifte og varme, alternativt kun varme. Valget gjøres med funksjonsvelgeren. Termostaten har innstillingsområde +5°C til +35°C. Kompakt og robust design i rød lakkert stålplate. Det kraftige rørstativet fungerer som et godt balansert og ergonomisk bærehåndtak. Utformingen beskytter mot slag og vibrasjoner for bruk i tøffere miljøer. Utstyrt med et 230 V uttak på baksiden. Leveres med 1,8 m tilkoblingskabel med CEE-støpsel for tilkobling til jordet uttak 400 V. 
Godkjent for utendørs bruk. IP44.
Luftstrøm: 720 m³/t. 
Vekt: 10 kg.

Heating fan for heating premises. With thermostat and three power modes, fan only, half power and full power. Overheating protection with thermal fuse. After use, the knob should be set to fan only to cool down the elements. If the fan is switched off without cooling down, the overheating protection may trip. Strong carrying handles. Fixed 16A CEE don. 400 V.
Approved for outdoor use. IP44.
Air flow: 400 m³/h.
Weight: 8 kg.

Robust and reliable fan heater 230 V, equipped with thermal fuse. Made of sheet steel and painted with heat-resistant paint.
Approved for outdoor use. IP44.
Power level: 25/1000/2000 W.
Air flow: 186 m³/h.
Noise level: 51 dB.
Weight: 3.5 kg.
Supplied complete with cord and plug.

Robust and reliable fan heater 400 V, equipped with thermal fuse. Made of sheet steel and painted with heat-resistant paint. Electrical connection intake type 416.
Approved for outdoor use. IP44.
Power level: 30/2500/5000 W.
Air flow: 530 m³/h.
Noise level: 54 dB.
Weight: 5.6 kg.
Supplied without cord and plug.