1000 V-verktyg

Gloves that protect against live parts. Protects up to 1000 V according to DIN EN 60903 / IEC 60903.

Flat pliers with insulation according to SS IEC 900. For work under voltage up to 1000 V (by specially trained personnel). Simple joint. Long jaws. Grooved grip surface. Chrome plated.

Insulated extension cord made of high quality steel. For work under voltage up to 1000 V. With 2 layers of insulation. External square pin with screw for adjusting the ball in the pin, externally or internally, and to lock or loosen the sleeve.
ISO 3316/1174-2, IEC 60900, VDE certified.

Protective rubber sheet with VDE insulation according to VDE 0680/1. Protects against live parts up to 1000 volts.

Insulated sleeve made of high quality steel. For work under voltage up to 1000 V. With 2 layers of insulation. With twelve-sided Dynamic Drive profile. Not suitable for use with machines.
ISO 2725, IEC 60900, VDE certified.

Cable cutter with insulation according to SS IEC 900, for work under voltage up to 1000 V (by specially trained personnel). For stripping cables. With ergonomically designed safety grip. Fixed blade.

Cable cutter with insulation according to SS IEC 900, for work under voltage up to 1000 V (by specially trained personnel). For stripping cables. The knife blade is designed at the end into a flat pin, which facilitates stripping and prevents the cable conductors from being damaged. With ergonomically designed safety grip. Fixed blade.

Chrome-plated head made of special stainless steel. With insulation according to SS IEC 900 for work under voltage up to 1000 volts (by specially trained personnel). Adjustable, single screw joint. Hardened and precision ground blades for cutting copper and aluminum cable (not for steel wire).
The cutting capacity refers to multi-wire copper cable.

With insulation according to SS IEC 900 for work under voltage up to 1000 volts (by specially trained personnel). Simple joint. Hardened, precision ground blades for cutting copper and aluminum cable (not for steel wire). Adjustable screw joint with anti-rotation nut. Chrome-plated.
No. 9516-200 with two cutting positions. When pre- and post-cutting, cable up to Ø 25 mm can be cut.
The cutting capacity refers to multi-wire copper cable.

Insulated combination pliers with induction hardened blades. Tested and approved for work under voltage up to 1000 V according to ISO 5749, IEC 60900. Made of black-oxidized and rust-protected chrome vanadium steel. Jaws with a rounder shape for better accessibility. Open joint, where the distance from the center of the joint to the edges has been reduced, which increases gearing and cutting power. The cutting edges are specially made for cutting hard material, such as piano wire and spring steel wire. Gripping surface to fit both round and flat materials.
The cutting capacity refers to piano wire 2100 N/mm².
ISO 5746, DIN 5746.

Combination pliers with insulation according to SS IEC 900. For work under voltage up to 1000 V (by specially trained personnel.) Single joint. With tube grip and grooved grip surfaces and side cutters. Made of chrome vanadium steel. Chrome-plated.
The cutting capacity refers to piano wire 2300 N/mm².

Combination pliers with insulation according to SS IEC 900. For work under voltage up to 1000 V (by specially trained personnel). Simple joint. With tubular grip and grooved grip surfaces. Made of special tool steel. Chrome-plated.
The cutting capacity refers to hard steel wire 1800 N/mm².

Type Alligator. With insulation according to SS IEC 900 for work under voltage up to 1000 volts (by specially trained personnel). Strong execution of chrome vanadium steel. Ribbed alligator jaws with patented tube grip.
Self-locking - when the pliers are clamped around an object, they lock into place. Chrome plated head.

Insulated ring spanner made of high quality steel. For work under voltage up to 1000 V. With 3 layers of insulation. Twelve edge with Dynamic Drive profile.
IEC 60900, opening according to ISO 691, VDE certified.

Insulated side cutter with induction-hardened inserts. Tested and approved for work under voltage up to 1000 V according to ISO 5749, IEC 60900. Black oxidized and anti-rust treated. Made of high-quality steel. Ergonomically designed handles in two-component plastic material. Progressive edge makes it possible to cut hard material closest to the joint, such as piano wire, and softer material such as copper wire and plastic-insulated wire closer to the tip. Screwed joint. The position of the screw enables high transmission with minimal power consumption. Slim, rounded jaws make it easier to access even in tight spaces.
The cutting capacity refers to piano wire 2100 N/mm².

Side cutter with insulation according to SS IEC 900. For work under voltage up to 1000 V (by specially trained personnel). Simple joint. Powerful model - for hardened wire. Polished. Chrome-plated. 
The cutting capacity refers to hard steel wire 1800 N/mm².

Side cutter with insulation according to SS IEC 900. For work under voltage up to 1000 V. Single joint. Strong - for hardened wire. Chrome-plated.
The cutting capacity refers to piano wire 2300 N/mm².

Black oxidized and rust-protected special steel. With insulated handles approved for work under voltage up to 1000 volts. Approved according to SEN, VDE 0680, IEC 900. With adjusting screw for desired wire diameter up to 5 mm.
Cutting capacity:
Cable: 0.5-5.0 mm.
Copper wire : 0.05-10.0 mm².

With insulation according to SS IEC 900 for work under voltage up to 1000 volts (by specially trained personnel). Simple joint. With adjusting screw for desired wire diameter up to 5 mm and 10 mm². With spring. Chrome-plated.
IP = Industrial pack

Insulated screwdriver for hex screw.
Approved for work under voltage up to 1000 V.
Complies with IEC 60900, DIN-EN 60900, EN 60900, VDE 0682 part 201.
Evaluation and tests of screwdrivers are carried out in accordance with latest national and international standards:
- individual tests in water bath with 10 kV voltage.
- date stamped with year of manufacture.
- intensive cold tests.
Round blade of high quality steel. Black oxidized tip for maximum precision. Ergonomically developed three-component handle made of polypropylene and thermoplastic elastomer. Permanent color marking at both ends of the handles for easy identification of the correct screw tip.
DIN 7439. Tip DIN ISO 2936.

Insulated screwdriver for Phillips PH screw.
Approved for work under voltage up to 1000 V.
Complies with IEC 900, EN 60900, DIN-EN 60900, VDE 0682 part 201.
Evaluation and tests of screwdrivers are carried out in in accordance with the latest national and international standards:
- individual tests in a water bath with 10 kV voltage.
- date stamped with year of manufacture.
- intensive cold tests.
Round blade of high quality steel. Black oxidized tip for maximum precision. Ergonomically developed three-component handle made of polypropylene and thermoplastic elastomer. Permanent color marking at both ends of the handles for easy identification of the correct screw tip.
DIN 7438. Tip according to DIN ISO 8764-1, ISO 8764-1.

Screwdriver with insulating according to SS IEC 900 for work under voltage up to 1000 V (by specially trained personnel). Lasertip chisel tip reduces the risk of chipping. Handle of type Kraftform of two different materials - harder plastic with rubber insert for best grip.
* = Without Laser tip.

Insulated screwdriver for Pozidriv® screw.
Approved for work under voltage up to 1000 V. Complies with IEC 60900, DIN-EN 60900, EN 60900, VDE 0682 part 201.
Evaluation and tests of screwdrivers are carried out in accordance with the latest national and international standards:
- individual tests in water bath with 10 kV voltage.
- date stamped with year of manufacture.
- intensive cold tests.
Round blade of high quality steel. Black oxidized tip for maximum precision. Ergonomically developed three-component handle made of polypropylene and thermoplastic elastomer. Permanent color marking at both ends of the handles for easy identification of the correct screw tip.
BE-8840S with double grip.
DIN 7438. Tip DIN ISO 8764-1, ISO 8764-1.

Screwdriver with insulation according to SS IEC 900 for work under voltage up to 1000 V (by specially trained personnel). Lasertip chisel tip reduces the risk of chipping. Handle of type Kraftform of two different materials - harder plastic with rubber insert for best grip.
* = Without Laser tip.

Insulated screwdriver for straight slots. Adapted for work under voltage up to 1000 V. Round insulated blade of hardened vanadium steel. Ergonomic two-component handle.
Tested and approved according to VDE GS 1000V 14 IEC60900:2004.

Screwdriver with insulation according to SS IEC 900 for work under voltage up to 1000 V (by specially trained personnel). Lasertip chisel tip reduces the risk of chipping. Handle of type Kraftform of two different materials - harder plastic with rubber insert for best grip. Chisel tip and insulation are the same width.
* = Without Laser tip.

Insulated screwdriver for Torx® screw.
Approved for work under voltage up to 1000 V.
Complies with IEC 60900, DIN-EN 60900, EN 60900, VDE 0682 part 201.
Evaluation and tests of screwdrivers are carried out in in accordance with the latest national and international standards:
- individual tests in water bath with 10 kV voltage.
- date stamped with year of manufacture.
- intensive cold tests.
Round blade of high quality steel. Black oxidized tip for maximum precision. Ergonomically developed three-component handle made of polypropylene and thermoplastic elastomer. Permanent color marking at both ends of the handles for easy identification of the correct screw tip.

Screwdriver with insulation according to SS IEC 900 for work under voltage up to 1000 V (by specially trained personnel). Round blade, with "Black-Point" branded chisel point, which guarantees great toughness, high torque and long life. Handle of type Kraftform of two different materials - harder plastic with rubber insert for best grip.

5-piece screwdriver set for slotted, Pozidriv and Torx screws. Tested and approved for work under voltage up to 1000 V. Slim blade and comfortable three-component handle. Permanent color marking on both ends of the handle for easy tip identification. Made of high-quality steel with the insulating material cast directly onto the blade. Black oxidized tip for best precision. Individually tested and manufactured in accordance with IEC 60900. Supplied in a box.
Contents: 1 pc 0.5x3.0, 1 pc 0.8x4.0, 1 pc PZ1, 1 pc PZ2 and 1 pc T10.

Screwdriver set groove and PZD. Approved for work under voltage up to 1000 V.
Complies with IED 900, EN 60900, DIN-EN 60900.
Evaluation and tests of screwdrivers are carried out in accordance with the latest national and international standards:
- individual tests in water bath with 10 kV voltage.
- date stamped with year of manufacture.
- intensive cold tests.
Round blade of specially hardened vanadium extra steel, highly polished, nickel-plated and chrome-plated.
Black-oxidized tip for maximum precision. Ergonomically developed three-component handle made of polypropylene and thermoplastic elastomer. Permanent color marking at both ends of the handles for easy identification of the correct screw tip.
Tip DIN 5264-A, ISO 2380-1
Contains 3 slot screwdrivers (BE8820S, 8040S, 8050S) and 2 screwdrivers for Pozidriv® screws ( BE8810S, 8820S).

Screwdriver set for straight slots, Phillips slots and Pozidriv slots in 6 parts. Insulated chisels for work under voltage up to 1000 V. Round insulated blade of hardened vanadium steel. Ergonomic two-component handle. Contains 1 Phillips screwdriver, 2 Pozidriv screwdrivers and 3 slotted screwdrivers.
Tested and approved according to VDE GS 1000 V 14 IEC 60900:2004

Screwdriver set in 7 parts. With 1 locking screwdriver handle and 6 VDE gear blades. Chisel handle with ergonomic Kraftform Plus multi-component grip, intended for use only with Wera VDE gear blades. Interchangeable blade system enables quick change of screwdriver blade. 157 mm long VDE gear blades with color coding and size marking. Individually controlled tools according to IEC 60900 at 10000 V for safe work at the permitted voltage of 1000 V. Supplied in a light and robust, durable folding case that can be attached to other Wera 2go components. 
Contents: 
1 pc Screwdriver handle 817 VDE 
2 pc VDE gear blades (VDE 62 i) for Phillips slot, PH 1, PH2 
4 pcs VDE gear blades (VDE 60 i) for slot screw, 0.4x2.5, 0.6x3.5, 0.8x4.0, 1 .0x5.5 mm

Black-oxidized and rust-protected chrome vanadium steel with induction-hardened cutting edges. New design with rounder shaped jaws for better accessibility. Tongs with so-called open joint, where the distance from the joint center to the edges is reduced, something that increases gearing and cutting power. With insulated handles approved for work under voltage up to 1000 V. The cutting edges are specially made for cutting hard materials, such as piano wire and spring steel wire. Gripping surface to fit both round and flat materials.
The cutting capacity refers to hard steel wire 2100 N/mm².
ISO 5745, DIN 5745.
Approved according to CEI/IEC 900, EN 60900 , VDE 0680.

Approved according to CEI/IEC 900, EN 60900, VDE 0680.
Black oxidized and rust-protected chrome vanadium steel. With insulated handles approved for work under voltage up to 1000V. Long, pointed and grooved jaws with semi-circular cross-section, bent 60°. For cutting copper wire and plastic-insulated wire.
The cutting capacity refers to hard steel wire 2100 N/mm².
ISO/DIN 5745

With insulation according to SS IEC 900. For work under voltage up to 1000 V (by specially trained personnel). Pointed tongs. Simple joint. Long jaws. Grooved grip surface. With side cutters. Chrome-plated.
The cutting capacity refers to hard steel wire 1800 N/mm².

With insulation according to SS IEC 900. For work under voltage up to 1000 V (by specially trained personnel). Simple joint. Long jaws. Grooved grip surface. With side cutters. Chrome-plated.
The cutting capacity refers to hard steel wire 1800 N/mm².

With insulation according to SS IEC 900. For work under voltage up to 1000 V. Single joint. Long, curved jaws 45°. Grooved grip surface. With side cutters. Chrome-plated.
The cutting capacity refers to hard steel wire 1800 N/mm².

Insulated latch handle made of high quality steel. For work under voltage up to 1000 V. With 3 layers of insulation. Locking function with 28 teeth and 13° engagement angle. Button for changing the direction of pull and for easy release of the sleeve.
ISO 3315/1174-2, IEC 60900, VDE certified.

Insulated T-handle made of high quality steel. For work under voltage up to 1000 V. With 2 layers of insulation. External square pin with screw for regulating the ball in the pin, externally or internally and to lock or loosen the sleeve.
ISO 3315/1174-2, IEC 60900, VDE certified.

Tool set in 10 parts with insulated tools 1000 V according to IEC 60 900. Supplied in a bag.
Contents:
1 pc side cutter 2171V-160, length 160 mm
1 pc pointed plier 2430V -160, length 160 mm
1 pc combination pliers 2678V-180, length 180 mm
1 pc slot screwdriver BE-8010S, 0.4x2.5 mm
1 pc slot screwdriver BE-8220S, 0.5x3.0 mm
1 pc slotted screwdriver BE-8230S, 0.6x3.5 mm
1 pc slotted screwdriver BE-8040S, 0.8x4.0 mm
1 pc slotted screwdriver BE-8050S, 1.0x5.5 mm
BR>1 pc slotted screwdriver BE-8255S, 1.2x6.5 mm
1 pc Phillips screwdriver BE-8620S, PH 1