Hammare, Huggmejslar, Dornar, Smidesverktyg

In lacquered, copper-coloured vanadium steel with specially hardened impact end.
DIN 7254 form B.

Lakkert, kobberfarget vanadiumstål med spesialherdet slagende.
Med beskyttelseshåndtak i plast.

Plastbelagt, förnicklat vanadinstål med specialhärdad slagände.
8-kantig form.
DIN 6458.

Drive mandrel made of special steel. Cylindrical shape. With octagonal, lacquered shaft. Specially hardened and impact-resistant skull.

Med styrehylse - doren er skyvbar i skaftet. Laget av kromvanadiumstål. Sylindriske. Riflet, forniklet skaft.

Octagonal lacquered shaft. Polished tip. Specially hardened, impact-resistant skull.

With steering sleeve. Made of chrome vanadium steel.

Drive mandrel set in dimensions 2-8 mm. Varnished, copper colored vanadium steel.

Set of cylindrical drive mandrels with 8-sided grip, made of chrome-molybdenum steel - matt finish/lacquered. Plastic holder that can be placed upright.

Set with drive mandrels in a practical plastic holder.

With steering sleeve. Made of chrome vanadium steel. In a tin cassette.

Set with 5 drive mandrels made of special steel. Air-hardened, polished design with impact-resistant skull. Equipped with protective handles.

Hammer for electricians. Skull with U-shaped impact surface - the design of the impact surface makes it possible to nail close to ceilings and corners and reduce the risk of impact marks on surrounding surfaces. Straight hole - designed for easy access when removing nails and cable clips near ceilings and corners. Ergonomic rubber handle provides a good grip regardless of whether you need power or precision.

Made of induction-hardened special steel. Polished design. Extra long. Octagonal shaft.

With finely polished work surfaces. Band width 50 mm. 348.50 slightly cupped. 349.50 more cupped.
350.50 fully cupped. 351.50 flat.

I lakkert kobberfarget vanadiumstål med spesialherdet slagende. Flat form.
DIN 6453.

Flat chisel made of special steel. Specially hardened, impact-resistant skull. Varnished.

Flat chisel with specially hardened, impact-resistant skull. Made of special steel. Polished design.

Form nailing hammer Vaughan 24 oz with extra long fiberglass shaft and large grooved striking surface. Recoil dampened. The grooved hitting surface prevents the nail from slipping despite oil and oblique hits. Straight claws to be able to divide, cleave and clear material. Equipped with fiberglass shaft and patented hollow keel, which absorbs vibrations and ensures the balance and feel of wood. Strong neck with high concentration of parallel fibers and resin gives maximum strength in this part. The handle is attached with a carved steel wedge and epoxy glued to the head. The handle is ergonomically contoured from PVC.
Weight oz = without handle
Weight g = with handle

The form nailing hammer has a longer handle compared to a regular carpenter's hammer, which means that you drive the nail in faster and also dampens the recoil. Straight claws to be able to divide, cleave and clean material efficiently. Equipped with solid patented I-Beam steel shaft with deep V-shaped head, reduces hand and arm vibrations to a minimum. The head is equipped with a nail extractor on one side and a powerful magnetic nail holder on the top side that can also handle double-headed nails. The high-strength construction of the grip part reduces the weight of the handle to achieve better balance. Non-slip ergonomically designed handle with air cushions for optimal grip and feel. Meets requirements according to ISO9002 / EN29002 / BS5750Pt2.
Weight oz = without handle
Weight g = with handle

Plaster hammer with partially hardened striking surface and cutting edge. Steel shaft.

Glazier's hammer in blasted and clear-lacquered forging, with a hardened round striking surface. Hickory wooden handle.

Made of solid, black rubber. Normal hardness. Wooden handle.

Club head made of white rubber that does not leave any ugly marks.

Oval bracket. Of hickory or ash. Without wedge. The dimensions of the eye are directly adapted for "Hultafors" hammers and chisel hammers.

Hand protection made of PVC plastic. Intended to be threaded onto the chisel shank. Prevents hand injuries and provides a more comfortable grip. Fits masonry chisels 300-400 mm and flat chisels 95/150-400 mm.

For lær m.m. Blankpolert, konisk skjærehode. Rundt skaft. Lakkert.

For lær m.m. Med bøyle. Blankpolert, konisk skjærehode. Rektangulært skaft. Lakkert.

Manufactured from Swedish steel. Fiberglass shaft with rubber insert.

Forged knuckles with hardened square punches at both ends. Hickory shaft.

Manufactured from Swedish steel. Hickory shaft.

Copper hammer with replaceable punches (driven on) of high-quality pure bar copper. Smooth mallet hammer head with grooved inside for best grip on the replaceable hammers. Hickory shaft.

Made of high-quality pure bar copper. Fiberglass shaft.

I lackerat, kopparfärgat vanadinstål. Spetsig form.
DIN 6451

Cross chisel made of special steel. Flat shape. Specially hardened and impact-resistant skull. Varnished.

Made of special steel. Specially hardened, impact-resistant skull. Lacquered shaft. Polished tip.

Ball hammer. Partially hardened impact surfaces. Hickory shaft with patterned surface and matt protective varnish. Shaft attachment with double cross wedge and epoxy.

Kulhammare för verktygsmakare. Skaft av hickory med mönstrad yta för bra grepp.

Blasted and clear lacquered. With round impact and crushed bullet. Hickory shaft.

The skull dampens the impact and counteracts the recoil. The handle provides optimal grip for all jobs. With counterweight at the end for better balance and more natural rotation.

Plastic-coated, highly polished and nickel-plated vanadium steel with specially hardened impact end. Octagonal shape.
DIN 7250

Driver made of special steel. Octagonal shape. Ground and polished tip. Specially hardened and impact-resistant head. Varnished.

Driver with carbide tip. Octagonal shape. Sanded and polished.

Octagonal lacquered shaft. Polished tip. Specially hardened, impact-resistant skull.

Autopilot activated by pressing down. Replaceable hardened tip. Adjustable thumb screw.

With adjustable, springy stroke. The spring is tensioned and released when pressed against the tip. Lettered shaft. 18 A-2947 is replaceable tip.

Lektehammer med delvis herdet slagflate og klo og magnetisk spikerholder. Kraftig stålskaft. Anatomisk utformet håndtak med perforert, matt overflate gir et sikkert grep.
DIN 7239. GS-sertifikat.

Magnetic model with a rectangular hitting surface and an oblong hitting surface with a centered groove. Hickory shaft.

Chisel hammer with convex partially hardened striking surfaces. Handle of ash wood with a patterned surface and matt protective varnish. Shaft attachment with double cross wedge and epoxy.
DIN 6475. GS certificate.

Chisel hammer with hardened square punches at both ends. Oval steel shaft with perforated rubber handle.

Blasted and clear lacquered. Hickory shaft.

Blasted and clear lacquered. Oval tubular steel shaft, covered with perforated rubber handle.

Chisel hammer in blasted and clear-lacquered forging, with hardened and plane-ground striking surfaces on both sides. Hickory wooden handle.

Fully forged vibration dampened hammer. The steel tube shaft is covered with an ergonomic grip friendly rubber handle.

"Hultafors" Av hickory. Uten kile. Oval brakett.

For body work, etc. Forged from special steel and hardened. The work surfaces were sanded and polished.

Murarhammare med partiellt härdad och matterad slagyta och spikhållare. Kraftigt stålskaft med bekvämt och säkert grepp.

Masonry hammer in blasted and clear-lacquered forging, with hardened square striking surface and wide sharpened chisel. Recesses for nail extraction and hickory shaft.

Masonry hammer in blasted and clear-lacquered forging, with hardened square striking surface and sharpened chisel. Steel shaft with ergonomically designed and knurled handle for optimal grip.

Ergonomically designed masonry hammer, forged in one piece for increased durability with vibration dampening urethane plug. Hardened square striking surface and a strong, ground chisel with notches for nail extraction. Correct angle and shape of chisel for safe splitting of bricks. Steel shaft with I-profile for increased durability. Handle designed with clear end stop for a secure grip.

With tubular steel shaft and rubber grip.

Steelmaster mason's hammer with sharp chisel tip for cutting bricks and slate. Fully heat treated carbon steel head for strength, durability and safety. The head mounted on the shaft with 5 tons of pressure for increased safety. Soft ergonomic handle for comfort and grip. Steel handle with neoprene grip.

Brick chisel with flat shape. Made of special steel. Octagonal shaft. Specially hardened and impact-resistant skull. Varnished.

Chisel made of inductively hardened special steel. Intended for concrete, stone, etc. Polished design. Octagonal shaft.

Rivet tool set in 6 parts. Special steel tool.
Contents:
1 pc rivet puller 126-2
1 pc rivet puller 126-3
1 pc rivet puller 126-4
1 pc rivet punch 127 -2
1 pc rivet punch 127-3
1 pc rivet punch 127-4
1 pc plastic holder

Pen hammer. Carpenter's hammer, English model. Partially hardened impact surfaces. Wooden shaft made of ash with a patterned surface and matt protective varnish. Shaft attachment with double cross wedge and epoxy.

Penhammare för verktygsmakare och lättare monteringsarbeten. Skaft av hickory med mönstrad yta för bra grepp.

Blasted and clear lacquered. With round stroke and long pen. Ash/hickory shaft.

The skull dampens the impact and counteracts the recoil. The handle provides optimal grip for all jobs. With counterweight in the shaft for better balance and more natural rotation.

For normal work in impact-sensitive materials where you want to avoid impact marks in materials such as copper, lead, brass, rubber or wood. Blue hammer heads made of an artificial material of cellulose butyrates and with rounded surfaces.
Handle of noble wood. Resistant to oil, grease and petrol.
3625NL = Loose impact surfaces, supplied as a pair.

For rougher work such as assembly, disassembly and shaping of sheet metal etc. Yellow hammer heads made of an artificial material of polyurethane elastomer. The hammer head is mounted on a shock-absorbing light metal housing. Shaft of precious wood. High durability against wear and tear in the plastic surface and withstands strong shocks and blows against sharp edges significantly better than conventional nylon hammers. Resistant to oil, grease and most solvents.
3625YL = Loose impact surfaces, supplied as a pair.

With replaceable punches. Yellow. (The beat is driven on). Hammerhead made of hammered ware. Ash shaft.

Rectangular. Hickory shaft.

With shaft of ash. With square stroke and pen at an angle to the shaft.

Blasted and clear lacquered, hand forged with hardened pen and striking surface. Tubular shaft with an ergonomically designed and knurled handle.

Tinsmith's hammer with fiberglass shaft and patented hollow wedge absorbs vibrations and ensures the balance and feel of wood. Strong neck with high concentration of parallel fibers and resin provides maximum strength in this sensitive part. The handle is attached with a carved steel wedge and epoxy glued to the head. The handle is ergonomically contoured from easy-to-grip PVC for extra comfort and longevity.
Meets requirements according to ISO9002 / EN29002 / BS5750Pt2.

Pile screed with extra large head in PPEM and nice ribbed fiberglass shaft. The head is durable and resistant even to concrete and rougher, sharp surfaces and edges. Impact surfaces of 120 mm in diameter.

For body work, etc. Blue burnt varnish - the working surfaces finely polished. Ash shaft.
Model: 272K has 1 round grooved stroke and 1 flat square stroke.
Model: 275 has 1 round flat stroke and 1 lumpy.< BR>Model: 276 has 1 round flat shot and 1 elliptical ball shot.

For body work, etc. Blue burnt varnish - the work surfaces finely polished. Ash shaft.

For body work, etc. Blue burnt varnish - the work surfaces finely polished. Ash shaft.
Model: 272 has 1 round and 1 square stroke.

Made of special steel and hardened. The work surface is finely polished. Flat, double curved work surface (200x30-60mm).
Weight: 0.91 kg.

Made of special steel and hardened. The work surfaces finely polished. With two strongly curved, flat work surfaces (200x40-60mm).
Weight: 2.2 kg.

Plastic-coated, nickel-plated vanadium steel, specially hardened impact end. Set of 6 in plastic pocket.

Set with chisels, drivers and mandrels in nickel-plated vanadium steel, specially hardened impact end. In plastic pocket.

Set with 3 different chisels, 1 driver and 2 mandrels, copper-coloured.
In lacquered anthracite gray metal box.
6 parts.
3756: 125x10x12 mm, 150x12x16 mm.
3735: 120x10x4 mm.
3749: 125x10x5mm.
3733: 120x10x3mm, 150x12x4mm.

Contains: 2 chisels, 1 cross chisel, 2 hole punches and 1 driver.
Plastic holder.

Contains: 2 chisels, 1 cross chisel, 2 hole punches and 1 driver.
Sheet cassette.

Sfix. Trident wedges. Steel.

Round wedges. Made of steel for hammer handles, mallet handles and ax handles.

With a straight cock. 15 mm hard zone at both ends for re-grinding. Steel pipe shaft with plastic handle.

I lackerat, kopparfärgat vanadinstål. Flat, oval form.

In lacquered, copper-coloured vanadium steel. Flat, oval shape. Plastic protective handle.

Slotting chisel made of special steel. Flat. Specially hardened, impact-resistant skull. Varnished.

Extra thin chisel made of inductively hardened special steel. Curved tip. Lacquered shaft. Polished tip.

Extra thin chisel made of inductively hardened special steel. Flat. Lacquered shaft. Polished tip.

Hammer with dampening handle made of fiberglass that absorbs vibrations. Shock-absorbing collar isolates the vibrations to the hammer's skull. Durable overmolded handle for best grip, comfort and vibration dampening. Ball-shaped head that provides more concentrated impact power.

Straight hickory shaft with oval mount and drilled hanging hole. The shafts are dipped in linseed oil which protects against moisture and provides a good grip.
Supplied with steel wedge and shaft instructions.

Plåtslagarhammare/smideshammare. Skaft i askträ av högsta kvalitet med mönstrad yta.
DIN 1041. GS-certifikat.

Forged from special steel. Hickory shaft.

Forged from special steel. Oval-shaped, nickel-plated tubular steel shaft covered with perforated rubber handle.

Forge sledgehammer made of black lacquered forge, with hardened square punches at both ends. Hickory wooden handle.

Forging sledgehammer made in black lacquered forging, with a hardened square punch at one end and a transverse pin at the other. Hickory wooden handle.

Forging sledgehammer made of black lacquered forging, with a hardened square punch at one end and a straight pen at the other. Hickory wooden handle.

Klohammare med partiellt härdad slagyta och klo. Greppvänligt träskaft av hickory med mönstrad yta och matt skyddslack. Säker skaftinfästning med både dubbel krysskil och epoxy.

Klohammare med glasfiberskaft och greppvänligt handtag i plastmaterial.

Claw hammer with highly polished steel shaft and easy-to-grip, shock-absorbing handle. Octagonal neck and round head. The shaft can withstand a bending force of 150 kg on the -16 and -20 oz models in normal use.
Weight oz = without shaft
Weight g = with shaft

Carpenter's hammer, French model. Shaft in ash wood of the highest quality with a patterned surface.
DIN 5109. GS certificate.

Carpenter's hammer forged in one piece for extra good durability. Ergonomically designed. Two-component handle molded directly onto the forged hammer. Long rounded rubber handle that provides a good grip in various positions. Optimized balance that increases efficiency and reduces muscle fatigue. Forged curved claw shape. Wide nail groove provides a large space for fitting the nail head.

Carpenter's hammer with round punch and curved claw. Grip-friendly rubberized handle for good grip.
Weight oz = without handle
Weight g = with handle

Traditional carpenter's hammer with curved claw. Grip-friendly rubberized handle for a good grip. Hammer made of carbon steel with a handle made of TPR/PP material.
Weight oz = without handle
Weight g = with handle

Carpenter's hammer with straight claw, nail puller on the side and magnetic nail holder for one-handed work. Grip-friendly rubberized handle for a good grip. Hammer made of carbon steel with a handle made of TPR/PP material.
Weight oz = without handle
Weight g = with handle

With leather grip and fully forged shaft. The handle is polished and varnished twice.
Weight oz = without handle
Weight g = with handle

With nylon/vinyl grip and fully forged shaft.
Weight oz = without shaft
Weight g = with shaft

Carpenter's hammer with oval tube shaft made of steel. Ergonomically designed handle with soft grip.

Ergonomically designed hammer, forged in one piece for increased durability with vibration dampening urethane plug. Thin strong enema that makes it easier to access without leaving marks. The opening and angle of the cup gives the best possible grip on the nail. Ergonomically designed handle with clear end stop provides a secure grip and is available in two sizes, Large and X-Large.
Weight oz = without handle
Weight g = with handle

Ergonomically designed hammer, forged in one piece for increased durability with vibration dampening urethane plug. Thin strong enema that makes it easier to access without leaving marks. Straight shank for better access and longer shaft for more power in tough jobs. Ergonomically designed handle with clear end stop provides a secure grip.
Weight oz = without handle
Weight g = with handle

Ergonomically designed hammer with a thin strong grip that makes it easier to access without leaving marks. The opening and angle of the cup gives the best possible grip on the nail. Correct angle and shape of the hitting surface for optimal work.
Weight oz = without shaft
Weight g = with shaft

A fully forged steel hammer with proprietary tuning fork technology. 25% larger hitting surface for best balance and feel. Soft grip for best comfort and vibration damping. Precision balanced head for more comfortable grip. Weight is stated without shaft.

A fully forged steel hammer with proprietary tuning fork technology. 25% larger hitting surface for best balance and feel. Soft grip for best comfort and vibration damping. Precision balanced head for more comfortable grip. Weight is stated without shaft.

Light but powerful welded carpenter's hammer with a secure handle. Curved claw. Large hitting surface. Magnetic nail holder for one-handed nailing.
Weight oz = without shaft
Weight g = with shaft

Crown-hardened hammer that prevents splinters from flying out and injuring eyes. With round, domed impact and octagonal impact neck. Chrome-plated, oval steel tube shaft, covered with perforated rubber handle. High gloss polished.
Weight oz = without handle
Weight g = with handle

Light and powerful carpenter's hammer with hickory wooden handle. Curved axe-like comfortable handle. Magnet that holds the nail so that you have one hand to hold the workpiece.

Fiberglass shaft with hollow wedge built into the shaft for effective recoil absorption.
Weight oz = without shaft
Weight g = with shaft

Carpenter's hammer with straight claw and patented recoil damping.

Solid steel shaft with hickory and built-in rubber plug for efficient recoil absorption.
Weight oz = without shaft
Weight g = with shaft

Carpenter's hammer with solid steel shaft and straight claw. Recoil dampened. Non-slip ergonomically designed handle.

Tubular steel shaft with hickory plug built into the shaft for effective recoil absorption.
Weight oz = without shaft
Weight g = with shaft

Carpenter's hammer with tubular steel handle and straight claw. Recoil dampened. Non-slip ergonomically designed handle.

Lacquered, copper-colored vanadium steel with specially hardened impact end.
8-angled shape. DIN 7256.

Lakkert, kobberfarget vanadiumstål med spesialherdet slagende.
Beskyttende håndtak i plast.

Specially hardened, impact-resistant skull. Made of special steel. Lacquered shaft, polished tip.
HS = Comes with hand guard.

Contains three nail drivers and two drivers. Matt chrome-plated chrome-molybdenum steel. Holder in plastic.
Nail driver: 2, 3, 4 mm
Driver: 2 and 4 mm

Octagonal lacquered shaft. Polished tip. Specially hardened, impact-resistant skull.

Dynagrip nail driver. Concave tip. Round with square head. Grip-friendly elastomer handle. Hardened steel for long life. Three sizes in different colors.

Plastic-coated, nickel-plated vanadium steel with specially hardened impact end. Fine ground and polished tip. Octagonal shape. DIN 6450. Form D.

Plastic-coated, nickel-plated vanadium steel with specially hardened impact end. Finely ground and polished tip.
8-angled shape. DIN 6450.

Drive mandrel with guide sleeve. Made of nickel-plated and chrome-plated vanadium extra steel with specially hardened impact end and ground, polished tip. The movable shaft guides the tip while safe expulsion takes place.
** without guide sleeve.

Kit with 6-piece bolt ejector. With plastic coated body. Made of nickel-plated vanadium extra steel with specially hardened impact end and finely ground, polished tip. Supplied with wooden holder.
DIN 6450. Form D.

Kit with 6-piece bolt ejector. With octagonal plastic coated body. Made of nickel-plated vanadium extra steel with specially hardened impact end and finely ground, polished tip. Supplied with wooden holder.
DIN 6450.

Drive mandrel in kit, with guide sleeve. Made of nickel-plated and chrome-plated vanadium extra steel with specially hardened impact end and ground, polished tip. The movable shaft controls the tip while safe expulsion takes place. Supplied in plastic stand.
5.9 mm without guide sleeve.

Drive mandrel in kit, with guide sleeve. Made of nickel-plated and chrome-plated vanadium extra steel with specially hardened impact end and ground, polished tip. The movable shaft controls the tip while safe expulsion takes place. Delivered in plastic pocket.
5.9 mm without guide sleeve.

Forged hammer with a square punch at one end and straight pen at the other. Both hardened. Fiberglass shaft with rubber insert.

With square, beveled stroke and ground pen. Hickory shaft attached with special resin and safety pin.

Height: 785 mm.
Diameter: 100 mm

For laying paving stones. 170 mm long wooden shaft.

Forged stonemason's hammer with ash shaft. Square hitting surface 40x40 mm. The head is ring wedged in the shaft.

Bounce-free hammer with steel impact head, filled with finely divided steel particles. Replaceable nylon punches (punches are driven on). Rubber handle.

The Vaughan anti-bounce hand rest is integrally cast in one piece for optimum strength and durability. The head is filled with steel balls that provide a "soft" blow with great power that effectively dampens the impact and recoil without bouncing up. The head of the sledgehammer is gentle on the workpiece and does not form sparks. Mesh-patterned handle with end knob for a comfortable, secure grip. Resistant to oil, petrol and most chemicals.

Non-bounce mallet made of NBR rubber (acrylonitrile butadiene rubber), with steel balls inside.

Bounce-free mallet with soft striking surfaces that do not damage the surface or the equipment. Effective recoil dampening that eliminates bounce when you hit hardened surfaces. Made of non-ferrous materials, which eliminates the risk of sparks. The material in the head and handle does not absorb liquid, which provides safer shots and longer life. Optimized ergonomics with textured grip for safer strokes and increased safety. The head is shaped so the club can stand on its own.

Bounce-free mallet with soft hitting surfaces. Full cast urethane construction. The handle is welded to the top of the head and has a waffle pattern. The handle end can also be used as a striking surface. Spark-free because the steel structure is completely embedded in hot-pressed urethane. Recoil damping thanks to hundreds of steel balls that move inside the head and absorb the energy on impact.

Mallet with head covered in urethane and a recoilless function. The skull is filled with steel balls that dampen the impact and reduce the recoil. The soft urethane layer is gentle on the workpiece. Ergonomically designed handle in Santoprene for optimal grip. Flat surface of the skull enables upright storage.

Bounce-free sledgehammer with soft striking surfaces that do not damage the surface or the equipment. Effective recoil dampening that eliminates bounce when you hit hardened surfaces. Made of non-ferrous materials, which eliminates the risk of sparks. The material in the head and handle does not absorb liquid, which provides safer shots and longer life. Optimized ergonomics with textured grip for safer strokes and increased safety. The head is shaped so the hammer can stand on its own.

Bounce-free sledgehammer with soft striking surfaces. Full cast urethane construction. Flat surface on the top of the head also enables storage in an upright position. The handle is welded to the top of the head with a waffle pattern. The handle end can also be used as a striking surface. Spark-free because the steel structure is completely embedded in hot-pressed urethane. The urethane coating also helps to reduce the noise level. Recoil damping thanks to hundreds of steel balls that move inside the head and absorb the energy on impact.

Workshop hammer, French model, for use on metal. Shaft in ash wood of the highest quality with a patterned surface.

Workshop / pen hammer with carbon steel head and fiberglass handle with TPR.

T-block workshop hammer. The skull dampens the impact and counteracts the recoil. The handle provides optimal grip for all jobs. One hitting surface in nylon, the other in steel. With counterweight at the end for better balance and more natural rotation.