Elhyvlar, Fräsmaskiner

Electric planer with powerful 710 W motor. Stable, flat aluminum footplate for best planing results. Optional chip ejection to the right or left. For cutting depths of up to 2.6 mm.
Standard equipment: Dust bag, parallel stop and hexagon key.

Electric planer with powerful 710 W motor. Stable, flat aluminum footplate for best planing results. Adjustable chip ejection on both sides for convenient dust removal and a clean work surface. Planer width of 82 mm. Planing depth of up to 2.6 mm. Compatible with various dust bags and parallel fences as well as the Bosch Click & Clean vacuum cleaner system. 
Standard equipment: Dust bag, parallel fence, hex key and storage bag.

Electric planer for high surface finish. Engagement lock for right- and left-handers. Option to choose chip ejection on the right or left side.
Standard equipment: Parallel stop 90°, 1 extra woodrazor blade, rebate depth stop and storage bag.

Low weight and good balance make this machine easy to use even with one hand. Planer depth adjustment in the front handle with 0.1 mm markings.
Bevel grooves in the front foot provide better precision for beveling work.
Standard equipment: HM turning insert, parallel stop and dust extraction adapter.

Compact electric planer with low weight and strong motor. Works with feed cutting and gives an extra fine planing surface, without impact marks or post-processing. Planer width of 65 mm. With stepless chip depth adjustment, one-button operation and grooves with a good grip on the housing. Quick steel change with automatic adjustment. Low noise level thanks to the specially designed spiral steel. Ergonomic handle with soft grip. Flexible dust extraction, the suction hose can be connected to the right or left as required.
Standard equipment: Parallel stop, hex key and stackable storage bag Systainer SYS3 M 187.

Electric planer with continuously adjustable chip and seam depth. Rubberized grip. Equipped with protective heel. Can be equipped with chip suction adapter and dust bag (sold separately). Dimensions (L x H) 296x165 mm
Standard equipment: Planer blade (HM), setting template and key.

Electric planer with ergonomic and rubber-coated handle that results in a safe and comfortable working position. Simple depth adjustment using the steering wheel control. Quick change of planer blades, light weight and good balance. The support foot at the rear edge of the table protects the work surface against the rotating cutter.
Standard equipment: Storage bag MakPac.

Joint cutter with a powerful 1700 W motor with a unique cover that effectively absorbs dust. With spindle lock for quick blade change. Comes with: transport bag and flexible 1-meter hose that fits the most common vacuum cleaners. For joint milling up to 8 mm. Supplied without diamond cutting blade.

Connection cutter for stable and invisible connections such as plate joints, frame connections, frame connections, box connections, etc. The system consists of the connection cutter, oval pins (Domino washers) in different sizes and a variety of accessories for different areas of use. The oval shape of the domino tile provides a larger adhesive surface that provides twist-proof and optimal stability. The milling tool performs a simultaneous drilling and oscillating movement that provides recoil-free work, so that you can work safely. The result is 100% precisely milled long holes. The width of the long holes can be easily adjusted while the joint cutter is working. Five tile sizes are available for the most varied material thicknesses and areas of use, dust extraction sucks up to 99% of the chips.
Standard equipment: Stop jaws, Domino milling steel D5, fork spanner NV8, list stop, parallel stop, 4 m plug- it power cable and stackable storage bag Systainer SYS3 M 187.

Powerful hand router intended for milling in wood and plastic. Fine adjustment in 1/10 mm increments for precise depth control. Speed ??preselection for areas of use that require material-specific speed. Constant speed thanks to electronic regulation. Ergonomic handle provides comfortable handling regardless of grip position. Unique Spindle Lock system enables quick accessory changes. Compatible with various Bosch guide rails as well as the Bosch Click & Clean vacuum cleaner system.
Standard equipment: Fixed key 19 mm, copy sleeve adapter, parallel stop with fine adjustment, clamping sleeve with counter nut 8 mm and storage box L-BOXX.

Electronic speed control that keeps the speed constant for a very good finish. Variable speed control. The milling steel is optimized for the task. Compact, lightweight construction that increases ease of use and user comfort. Motor housing in aluminum provides long durability.
Standard equipment: 2 pcs parallel stop, 2 pcs dust extraction adapter, 8 mm collet, 17 mm fixed key, 17 mm guide sleeve, 2 tables - 1 fixed and 1 adjustable, center taper , storage box.

Versatile hand router with powerful 1010 W motor. Ergonomic side handle for easy and safe operation. Compact shape and low weight. MMC electronics for material-adapted work and temperature monitoring. Precise depth setting. In a few seconds, you set the milling depth safely and can then fine-tune the depth steplessly in 1/10 mm ranges with the knob. The column clamp on both sides makes the hand router very torsionally rigid. Open work area that provides a clear view of the milling area. LED lighting in the form of a light ring, provides shadow-free lighting from all directions in two brightness levels. The light ring is integrated directly into the base plate and thus always close to the work object. The light ring is powered by a battery unit that is easily removed and charged via the USB-C connection. Simple and quick cutter change. High security thanks to quick brake and restart lock. Robust parallel stop that can be set quickly, accurately and without tools. The guide jaws provide a comprehensive contact surface. Integrated chip extraction in the milling table for connection to a vacuum cleaner, bayonet lock that fits suction hoses with a diameter of 27 and 36 mm. 4 m Plug-it cable for easy cable replacement.
Standard equipment: Parallel stop with fine adjustment SA-OF 1010/MFK, light module LM-OF 1010 R, collet Ø 8 mm, spanner NV 19, 4 m plug it mains cable, accessory set ZS-OF 1010 M, guide rail FS 800/2 and storage case Systainer SYS3 M 237.

Versatile hand router with powerful 1010 W motor. Ergonomic side handle for easy and safe operation. Compact shape and low weight. MMC electronics for material-adapted work and temperature monitoring. Precise depth setting. In a few seconds, you set the milling depth safely and can then fine-tune the depth steplessly in 1/10 mm ranges with the knob. The column clamp on both sides makes the hand router very torsionally rigid. Open work area that provides a clear view of the milling area. LED lighting in the form of a light ring, provides shadow-free lighting from all directions in two brightness levels. The light ring is integrated directly into the base plate and thus always close to the work object. The light ring is powered by a battery unit that is easily removed and charged via the USB-C connection. Simple and quick cutter change. High security thanks to quick brake and restart lock. Robust parallel stop that can be set quickly, accurately and without tools. The guide jaws provide a comprehensive contact surface. Integrated chip extraction in the milling table for connection to a vacuum cleaner, bayonet lock that fits suction hoses with a diameter of 27 and 36 mm. 4 m Plug-it cable for easy cable replacement.
Standard equipment: Parallel stop with fine adjustment SA-OF 1010/MFK, light module LM-OF 1010 R, collet Ø 8 mm, spanner NV 19, 4 m plug it mains cable, accessory set ZS-OF 1010 M, 8-piece milling set, guide rail FS 800/2 and storage bag Systainer SYS3 M 237.

Versatile hand router with powerful 1010 W motor. Ergonomic side handle for easy and safe operation. Compact shape and low weight. MMC electronics for material-adapted work and temperature monitoring. Precise depth setting. In a few seconds, you set the milling depth safely and can then fine-tune the depth steplessly in 1/10 mm ranges with the knob. The column clamp on both sides makes the hand router very torsionally rigid. Open work area that provides a clear view of the milling area. LED lighting in the form of a light ring, provides shadow-free lighting from all directions in two brightness levels. The light ring is integrated directly into the base plate and thus always close to the work object. The light ring is powered by a battery unit that is easily removed and charged via the USB-C connection. Simple and quick cutter change. High security thanks to quick brake and restart lock. Robust parallel stop that can be set quickly, accurately and without tools. The guide jaws provide a comprehensive contact surface. Integrated chip extraction in the milling table for connection to a vacuum cleaner, bayonet lock that fits suction hoses with a diameter of 27 and 36 mm. 4 m Plug-it cable for easy cable replacement.
Standard equipment: Parallel stop with fine adjustment SA-OF 1010/MFK, light module LM-OF 1010 R, collet Ø 8 mm, spanner NV 19, 4 m plug it mains cable and storage case Systainer SYS3 M 237.

Versatile hand router with ergonomic side handle for easy and safe operation. Compact shape and low weight. MMC electronics for material-adapted work and temperature monitoring. Precise depth setting. In a few seconds, you set the milling depth safely and can then fine-tune the depth steplessly in 1/10 mm ranges with the knob. Torsionally rigid milling table through guide columns on both sides. Open work area that provides a clear view of the milling area. Simple and quick cutter change. High security thanks to quick brake and restart lock. Integrated chip extraction in the milling table for connection to a vacuum cleaner, bayonet lock that fits suction hoses with a diameter of 27 and 36 mm. Plug-it cable for easy cable replacement.
Standard equipment: Collet Ø 8 mm, parallel stop, rail stop, chip collector, fork spanner 19 mm, guide rail FS 800/2 and Systainer SYS3 M 237.

Versatile hand router with powerful 1010 W motor. Ergonomic side handle for easy and safe operation. Compact shape and low weight. MMC electronics for material-adapted work and temperature monitoring. Precise depth setting. In a few seconds, you set the milling depth safely and can then fine-tune the depth steplessly in 1/10 mm ranges with the knob. The column clamp on both sides makes the hand router very torsionally rigid. Open work area that provides a clear view of the milling area. LED lighting in the form of a light ring, provides shadow-free lighting from all directions in two brightness levels. The light ring is integrated directly into the base plate and thus always close to the work object. The light ring is powered by a battery unit that is easily removed and charged via the USB-C connection. Simple and quick cutter change. High security thanks to quick brake and restart lock. Robust parallel stop that can be set quickly, accurately and without tools. The guide jaws provide a comprehensive contact surface. Integrated chip extraction in the milling table for connection to a vacuum cleaner, bayonet lock that fits suction hoses with a diameter of 27 and 36 mm. 4 m Plug-it cable for easy cable replacement.
Standard equipment: Parallel stop with fine adjustment SA-OF 1010/MFK, light module LM-OF 1010 R, collet Ø 8 mm, spanner NV 19, 4 m plug it mains cable, accessory set ZS-OF 1010 M and storage case Systainer SYS3 M 237.

Light hand router with 70 mm milling depth. MMC electronics for material-adapted work and temperature monitoring. Fast room. Simple and 1/10 mm-exact setting of the milling depth. Column clamps on both sides make the cutters extremely torsionally rigid. Rail control system. Changing the copy ring without tools. Convenient cutter change in the blink of an eye with the help of a rocker switch and locking principle. FastFix system for quick tool changes. Plug-it cable for easy cable replacement. Up to 99% extraction with chip collector and extraction hood when edge milling. Cleantec integrated bayonet lock as connection between vacuum cleaner and tool.
Standard equipment: Collet Ø 8 and 12 mm, parallel stop with fine adjustment, copying ring Ø 30 mm, extraction hood, chip collector, mounting tool and Systainer SYS3 M 337.

Compact and user-friendly overhand router with high working power. Electronically variable speed control in 6 steps located in the handle. Electronic power control. Easily accessible switch. Soft start (start current limitation). Spindle lock for easy replacement of milling steel. Graduated depth setting. Three-stage depth stop with fixed setting options. Steering column protected by rubber bellows. Ergonomic rubberized grip.
Standard equipment: Parallel hold, copy flange, collet 8 mm, suction nozzle, key and storage bag.

Compact hand router with soft start. Electronic speed controller with constant power and speed controller located on the handle for easy access. Spindle lock for easy replacement of milling steel. Steering column protected by rubber bellows. Can be fitted with chip suction adapter. Graduated depth setting. Three-stage depth stop with fixed setting options.
Standard equipment: Parallel stop, copy flange, key and stackable storage bag.

Compact hand router with soft start. Electronic speed controller with constant power and speed controller located on the handle for easy access. Spindle lock for easy replacement of milling steel. Steering column protected by rubber bellows. Can be fitted with chip suction adapter. Graduated depth setting. Three-stage depth stop with fixed setting options. Ergonomic rubberized grip.
Standard equipment: 12-piece milling steel set in aluminum case, parallel stop, copy flange, key and stackable storage case HSC.

Hand router with ergonomic design. Simple depth adjustment. Rubberized handles provide a secure grip. Can be driven in guide rail using adapter (194579-2). Cover plate in front of the processing area.
Standard equipment: Side stop, collet 6 mm and 8 mm, tool keys and storage box MakPac.

For universal use. Compact construction and ergonomic grip surfaces with Softgrip. Combined coarse and fine setting. Spindle locking and self-releasing clamping sleeve for quick cutter changes. The finger grips provide better stability, especially when working on edges. Compact and robust design thanks to sturdy aluminum housing with a long service life.
Standard equipment: Craftsman case, parallel stop, guide, collet with 6 mm union nut, collet with 8 mm union nut, fixed spanner 17 mm and storage box.

Lightweight edge cutter for chamfering, rounding, profile milling and groove milling. Simple and precise setting of the milling depth in 1/10 mm intervals. Optimum adjustment of the cutter to the table's hole prevents incorrect milling. High rotational accuracy thanks to stable coupling between the cutter and the drive. Simple and quick cutter change with the spindle stop. Cleantec standard connection for dust extraction. FastFix system for quick tool changes. Detachable, replaceable Plug-it mains cable with safety lock.
Standard equipment: Rounding cutter HW R3-OFK, extraction hood and stackable storage bag Systainer SYS3 M 187.

Paint cutter intended for removing paint and varnish from flat wooden surfaces such as stairs, doors and windows. Up to 70% less time consumption compared to conventional work techniques. Suitable for processing rebates thanks to side knives. Stepless adjustment of the milling depth. Gearbox in die-cast aluminium. Reversible insert in carbide that can be used on four sides for longer running time. Possibility of connection to a vacuum cleaner. 
Standard equipment: 4 carbide tipped blades, adapter for extraction, stick tool with grip, combination wrench and stackable storage bag metaBOX 145.

Flap milling cutter for precise groove milling. Infinitely adjustable stop in height for easy adjustment. Markings for precise positioning of the biscuit coupling. Precise milling depth adjustment without tools.
Standard equipment: Carbide disc cutter, ratchet wrench, dust bag, base plate and storage box.

Flap cutter with stepless height adjustment of the stop and fixed depth settings for 0, 10 and 20 biscuits, with additional fine adjustment for maximum precision. Planer adjustment of up to 20 mm cutting depth provides increased versatility.
Standard equipment: Carbide cutter, chip bag, key, dust extractor and storage box.

Special machine for joining details in wood. Robust aluminum front protection, angled from 0-90°, with fixed positions 0°, 45° and 90°. Six different cutting depths for biscuits no. 0, no. 10 and no. 20. Precise adjustment of side stops.
Standard equipment: Key, HM blade, dust collector and storage bag MakPac.

Powerful insert and copy cutter with 1600 W motor with constant electronics and soft start for material-adapted work. Patented switch in the handle (Trigger Control) provides optimal control right from the start. SDS quick change system, fix the separate engine block completely without play in either the insert or the copy unit. Fine adjustment provides accurate setting of the milling depth in 1/10 mm increments with fixed insertion function. LED lighting. Transparent sliding plate for precision work. Dust extraction.
Standard equipment: 2 pcs copier sleeves 17/30 mm, 2 pcs clamping sleeves 8, 12 mm with union nuts, centering pin 8, 12 mm, vacuum cleaner adapter for copier cutter, key 24 mm, copier unit, parallel stop with fine adjustment chip protection and storage bag L-BOXX.

Groove cutter for impact-free drawing of deep and wide grooves in concrete, brick and stone. Slots and channels are milled quickly and almost dust-free.
Standard equipment: Mounting flange, nut, 3 spacers (4 mm), 4 spacers (6 mm), breakout tool, spanner and storage box.

Light and flexible masonry router. The track width is set without the protective cover having to be dismantled. Closed dust cover for dust extraction. Electronics with overload protection and soft start.
Standard equipment: 2 diamond cutting blades, screwdriver, support handle, keys and storage box